Hi Rajendra,
On 02/04/2013 05:58 PM, Roger Quadros wrote:
> Provide the RESET and Power regulators for the USB PHY,
> the USB Host port mode and the PHY device.
>
> Also provide pin multiplexer information for the USB host
> pins.
>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
> arch/arm/boot/dts/omap4-panda.dts | 55 +++++++++++++++++++++++++++++++++++++
> 1 files changed, 55 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index 4122efe..fe2d3d4 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -57,6 +57,35 @@
> "AFML", "Line In",
> "AFMR", "Line In";
> };
> +
> + /* HS USB Port 1 RESET */
> + hsusb1_reset: hsusb1_reset_reg {
> + compatible = "regulator-fixed";
> + regulator-name = "hsusb1_reset";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio2 30 0>; /* gpio_62 */
> + startup-delay-us = <70000>;
> + enable-active-high;
> + };
> +
> + /* HS USB Port 1 Power */
> + hsusb1_power: hsusb1_power_reg {
> + compatible = "regulator-fixed";
> + regulator-name = "hsusb1_vbus";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio1 1 0>; /* gpio_1 */
> + startup-delay-us = <70000>;
> + enable-active-high;
> + };
> +
> + /* HS USB Host PHY on PORT 1 */
> + hsusb1_phy: hsusb1_phy {
> + compatible = "usb-nop-xceiv";
> + reset-supply = <&hsusb1_reset>;
> + vcc-supply = <&hsusb1_power>;
> + };
This is the patch I was discussing with you about before.
Let me explain the problem again.
The Pandaboard has a USB PHY whose reference clock is provided by
FREF_CLK3 pin which is a clock generated by the OMAP.
The PHY driver expects a reference to this clock in the PHY device node.
See the above node hsusb1_phy. we would need something like
hsusb1_phy {
...
clocks = <&fref_clk3>;
clock-names = "main_clk";
...
};
Currently on OMAP, there is no way to provide a phandle to this clock.
Is it practical to provide device tree based implementation of at least
the externally accessible OMAP clocks?
cheers,
-roger
> };
>
> &omap4_pmx_core {
> @@ -67,6 +96,7 @@
> &mcbsp1_pins
> &dss_hdmi_pins
> &tpd12s015_pins
> + &hsusbb1_pins
> >;
>
> twl6040_pins: pinmux_twl6040_pins {
> @@ -110,6 +140,23 @@
> 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
> >;
> };
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
