On Mon, Jan 28, 2013 at 01:30:09PM +0200, Roger Quadros wrote:
> PHY reset GPIO handling will be done in the PHY driver
>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> Acked-by: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
Acked-by: Felipe Balbi <balbi@xxxxxx>
> ---
> drivers/mfd/omap-usb-host.c | 47 -------------------------------------------
> 1 files changed, 0 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 0874352..502a779 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -430,24 +430,10 @@ static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
> static void omap_usbhs_init(struct device *dev)
> {
> struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
> - struct usbhs_omap_platform_data *pdata = omap->pdata;
> unsigned reg;
>
> dev_dbg(dev, "starting TI HSUSB Controller\n");
>
> - if (pdata->phy_reset) {
> - if (gpio_is_valid(pdata->reset_gpio_port[0]))
> - gpio_request_one(pdata->reset_gpio_port[0],
> - GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
> -
> - if (gpio_is_valid(pdata->reset_gpio_port[1]))
> - gpio_request_one(pdata->reset_gpio_port[1],
> - GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
> -
> - /* Hold the PHY in RESET for enough time till DIR is high */
> - udelay(10);
> - }
> -
> pm_runtime_get_sync(dev);
>
> reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
> @@ -476,37 +462,8 @@ static void omap_usbhs_init(struct device *dev)
> dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
>
> pm_runtime_put_sync(dev);
> - if (pdata->phy_reset) {
> - /* Hold the PHY in RESET for enough time till
> - * PHY is settled and ready
> - */
> - udelay(10);
> -
> - if (gpio_is_valid(pdata->reset_gpio_port[0]))
> - gpio_set_value_cansleep
> - (pdata->reset_gpio_port[0], 1);
> -
> - if (gpio_is_valid(pdata->reset_gpio_port[1]))
> - gpio_set_value_cansleep
> - (pdata->reset_gpio_port[1], 1);
> - }
> -}
> -
> -static void omap_usbhs_deinit(struct device *dev)
> -{
> - struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
> - struct usbhs_omap_platform_data *pdata = omap->pdata;
> -
> - if (pdata->phy_reset) {
> - if (gpio_is_valid(pdata->reset_gpio_port[0]))
> - gpio_free(pdata->reset_gpio_port[0]);
> -
> - if (gpio_is_valid(pdata->reset_gpio_port[1]))
> - gpio_free(pdata->reset_gpio_port[1]);
> - }
> }
>
> -
> /**
> * usbhs_omap_probe - initialize TI-based HCDs
> *
> @@ -710,8 +667,6 @@ static int usbhs_omap_probe(struct platform_device *pdev)
> return 0;
>
> err_alloc:
> - omap_usbhs_deinit(&pdev->dev);
> -
> for (i = 0; i < omap->nports; i++) {
> if (!IS_ERR(omap->utmi_clk[i]))
> clk_put(omap->utmi_clk[i]);
> @@ -756,8 +711,6 @@ static int usbhs_omap_remove(struct platform_device *pdev)
> struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
> int i;
>
> - omap_usbhs_deinit(&pdev->dev);
> -
> for (i = 0; i < omap->nports; i++) {
> if (!IS_ERR(omap->utmi_clk[i]))
> clk_put(omap->utmi_clk[i]);
> --
> 1.7.4.1
>
--
balbi
Attachment:
signature.asc
Description: Digital signature
