On 02/05/2013 08:16 AM, kishon wrote:
> On Monday 04 February 2013 09:28 PM, Roger Quadros wrote:
>> Allows the OMAP HS USB host controller to be specified
>> via device tree.
>>
>> CC: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> ---
>> .../devicetree/bindings/mfd/omap-usb-host.txt | 68 ++++++++++++++++
>> drivers/mfd/omap-usb-host.c | 83 ++++++++++++++++++--
>> 2 files changed, 145 insertions(+), 6 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-host.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
>> new file mode 100644
>> index 0000000..2196893
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
>> @@ -0,0 +1,68 @@
>> +OMAP HS USB Host
>> +
>> +Required properties:
>> +
>> +- compatible: should be "ti,usbhs-host"
>> +- reg: should contain one register range i.e. start and length
>> +- ti,hwmods: must contain "usb_host_hs"
>> +
>> +Optional properties:
>> +
>> +- nports: number of USB ports. Usually this is automatically detected
>> + from the IP's revision register but can be overridden by specifying
>> + this property.
>> +
>> +- portN_mode: Integer specifying the port mode for port N, where N can be
>> + from 1 to nports. The port mode must be as per enum usbhs_omap_port_mode
>> + in include/linux/platform_data/usb-omap.h
>> + If the port mode is not specified, that port is treated as unused.
>> +
>> +- single_ulpi_bypass: Must be present if the controller contains a single
>> + ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
>> +
>> +Required properties if child node exists:
>> +
>> +- #address-cells: Must be 1
>> +- #size-cells: Must be 1
>> +- ranges: must be present
>> +
>> +Properties for children:
>> +
>> +The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
>> +See Documentation/devicetree/bindings/usb/omap-ehci.txt and
>> +omap3-ohci.txt
>> +
>> +Example for OMAP4:
>> +
>> +usbhshost: usbhshost@0x4a064000 {
>> + compatible = "ti,usbhs-host";
>> + reg = <0x4a064000 0x800>;
>> + ti,hwmods = "usb_host_hs";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + usbhsohci: ohci@0x4a064800 {
>> + compatible = "ti,omap3-ohci", "usb-ohci";
>> + reg = <0x4a064800 0x400>;
>> + interrupt-parent = <&gic>;
>> + interrupts = <0 76 0x4>;
>> + };
>> +
>> + usbhsehci: ehci@0x4a064c00 {
>> + compatible = "ti,omap-ehci", "usb-ehci";
>> + reg = <0x4a064c00 0x400>;
>> + interrupt-parent = <&gic>;
>> + interrupts = <0 77 0x4>;
>> + };
>> +};
>> +
>> +&usbhshost {
>> + port1_mode = <1>; /* OMAP_EHCI_PORT_MODE_PHY */
>> + port2_mode = <2>; /* OMAP_EHCI_PORT_MODE_TLL */
>> + port3_mode = <1>; /* OMAP_EHCI_PORT_MODE_PHY */
>> +};
>> +
>> +&usbhsehci {
>> + phy = <&hsusb1_phy 0 &hsusb3_phy>;
>> +};
>> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
>> index f8ed08e..0f67856 100644
>> --- a/drivers/mfd/omap-usb-host.c
>> +++ b/drivers/mfd/omap-usb-host.c
>> @@ -1,8 +1,9 @@
>> /**
>> * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
>> *
>> - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
>> + * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
>> * Author: Keshava Munegowda <keshava_mgowda@xxxxxx>
>> + * Author: Roger Quadros <rogerq@xxxxxx>
>> *
>> * This program is free software: you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License version 2 of
>> @@ -27,6 +28,8 @@
>> #include <linux/platform_device.h>
>> #include <linux/platform_data/usb-omap.h>
>> #include <linux/pm_runtime.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>>
>> #include "omap-usb.h"
>>
>> @@ -464,6 +467,37 @@ static void omap_usbhs_init(struct device *dev)
>> pm_runtime_put_sync(dev);
>> }
>>
>> +static int usbhs_omap_get_dt_pdata(struct device_node *node,
>> + struct usbhs_omap_platform_data *pdata)
>> +{
>> + int ret, i;
>> +
>> + ret = of_property_read_u32(node, "nports", &pdata->nports);
>> + if (ret)
>> + pdata->nports = 0;
>> +
>> + /* get port modes */
>> + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
>> + char prop[11];
>> +
>> + snprintf(prop, sizeof(prop), "port%d_mode", i + 1);
>> + ret = of_property_read_u32(node, prop, &pdata->port_mode[i]);
>> + if (ret)
>> + pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
>> + }
>> +
>> + /* get flags */
>> + pdata->single_ulpi_bypass = of_property_read_bool(node,
>> + "single_ulpi_bypass");
>> + return 0;
>> +}
>> +
>> +static struct of_device_id usbhs_child_match_table[] __initdata = {
>> + { .compatible = "ti,omap-ehci", },
>> + { .compatible = "ti,omap-ohci", },
>> + { }
>> +};
>> +
>> /**
>> * usbhs_omap_probe - initialize TI-based HCDs
>> *
>> @@ -479,6 +513,21 @@ static int usbhs_omap_probe(struct platform_device *pdev)
>> int i;
>> bool need_logic_fck;
>>
>> + if (dev->of_node) {
>> + /* For DT boot we populate platform data from OF node */
>> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>> + if (!pdata)
>> + return -ENOMEM;
>> +
>> + if (usbhs_omap_get_dt_pdata(dev->of_node, pdata)) {
>> + dev_err(dev,
>> + "Error getting platform data from DT node\n");
>> + return -ENODEV;
>> + }
>> +
>> + dev->platform_data = pdata;
>> + }
>> +
>> if (!pdata) {
>> dev_err(dev, "Missing platform data\n");
>> return -ENODEV;
>> @@ -490,7 +539,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
>> return -ENOMEM;
>> }
>>
>> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> omap->uhh_base = devm_request_and_ioremap(dev, res);
>> if (!omap->uhh_base) {
>> dev_err(dev, "Resource request/ioremap failed\n");
>> @@ -661,10 +710,23 @@ static int usbhs_omap_probe(struct platform_device *pdev)
>> }
>>
>> omap_usbhs_init(dev);
>> - ret = omap_usbhs_alloc_children(pdev);
>> - if (ret) {
>> - dev_err(dev, "omap_usbhs_alloc_children failed\n");
>> - goto err_alloc;
>> +
>> + if (dev->of_node) {
>> + ret = of_platform_populate(dev->of_node,
>> + usbhs_child_match_table, NULL, dev);
>> +
>> + if (ret) {
>> + dev_err(dev, "Failed to create DT children: %d\n", ret);
>> + goto err_alloc;
>> + }
>> +
>> + } else {
>> + ret = omap_usbhs_alloc_children(pdev);
>> + if (ret) {
>> + dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
>> + ret);
>> + goto err_alloc;
>> + }
> These child devices should be destroyed on driver remove..no?
>
Indeed. good catch :).
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
