Allows the OHCI controller found in OMAP3 and later chips to
be specified via device tree.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
.../devicetree/bindings/usb/omap3-ohci.txt | 17 +++++++++++++++++
drivers/usb/host/ohci-omap3.c | 19 +++++++++++++++++++
2 files changed, 36 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/omap3-ohci.txt
diff --git a/Documentation/devicetree/bindings/usb/omap3-ohci.txt b/Documentation/devicetree/bindings/usb/omap3-ohci.txt
new file mode 100644
index 0000000..aabbfdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/omap3-ohci.txt
@@ -0,0 +1,17 @@
+OMAP HS USB OHCI controller (OMAP3 and later)
+
+Required properties:
+
+- compatible: should be "ti,omap3-ohci"
+- reg: should contain one register range i.e. start and length
+- interrupt-parent: phandle to the interrupt controller
+- interrupts: description of the interrupt line
+
+Example for OMAP4:
+
+usbhsohci: ohci@0x4a064800 {
+ compatible = "ti,omap3-ohci", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 76 0x4>;
+};
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 5ed28c5..b0bfab1 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -31,6 +31,8 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>
/*-------------------------------------------------------------------------*/
@@ -112,6 +114,8 @@ static const struct hc_driver ohci_omap3_hc_driver = {
/*-------------------------------------------------------------------------*/
+static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
+
/*
* configure so an HC device and id are always provided
* always called with process context; sleeping is OK
@@ -159,6 +163,13 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ /*
+ * Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &omap_ohci_dma_mask;
hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
dev_name(dev));
@@ -228,12 +239,20 @@ static void ohci_hcd_omap3_shutdown(struct platform_device *pdev)
hcd->driver->shutdown(hcd);
}
+static const struct of_device_id omap_ohci_dt_ids[] = {
+ { .compatible = "ti,omap3-ohci" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids);
+
static struct platform_driver ohci_hcd_omap3_driver = {
.probe = ohci_hcd_omap3_probe,
.remove = ohci_hcd_omap3_remove,
.shutdown = ohci_hcd_omap3_shutdown,
.driver = {
.name = "ohci-omap3",
+ .of_match_table = of_match_ptr(omap_ohci_dt_ids),
},
};
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
