On Mon, 28 Jan 2013, Roger Quadros wrote:
> For each port that is in PHY mode we obtain a PHY device using the USB PHY
> library and put it out of suspend.
>
> It is upto platform code to associate the PHY to the controller's
> port and it is upto the PHY driver to manage the PHY's resources.
"up to" is two words, not one.
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
> drivers/usb/host/ehci-omap.c | 54 ++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 54 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
> index fd2f5450..a35e44e 100644
> --- a/drivers/usb/host/ehci-omap.c
> +++ b/drivers/usb/host/ehci-omap.c
> @@ -70,6 +70,11 @@ static const char hcd_name[] = "ehci-omap";
>
> /*-------------------------------------------------------------------------*/
>
> +struct omap_hcd {
> + struct usb_hcd *hcd;
This pointer is not needed any more.
> + struct usb_phy **phy; /* one PHY for each port */
> + int nports;
Is there a reasonable upper limit on the number of ports? If there is
you could just put a fixed-size array here.
> @@ -233,6 +240,39 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
> hcd->rsrc_len = resource_size(res);
> hcd->regs = regs;
>
> + omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
> + omap->nports = pdata->nports;
> + i = sizeof(struct usb_phy *) * omap->nports;
> + omap->phy = devm_kzalloc(&pdev->dev, i, GFP_KERNEL);
> + if (!omap->phy) {
> + dev_err(dev, "Memory allocation failed\n");
> + return -ENOMEM;
You have to put a "goto" here, not a "return". The hcd must be cleaned
up properly.
> @@ -295,11 +342,18 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct usb_hcd *hcd = dev_get_drvdata(dev);
> + struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
What's with the weird spacing in the first two declarations? This
isn't a typeset document where the paragraphs need to be fully
justified. :-)
> + int i;
>
> usb_remove_hcd(hcd);
> disable_put_regulator(dev->platform_data);
> usb_put_hcd(hcd);
This line must be moved down. When the hcd is deallocated, the
omap_hcd structure goes with it.
> + for (i = 0; i < omap->nports; i++) {
> + if (omap->phy[i])
> + usb_phy_shutdown(omap->phy[i]);
> + }
> +
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
