Added dt support for dwc3 core and update the documentation with device tree binding information. Getting a PHY is now done using devm_usb_get_phy_by_phandle() for dt boot. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- Documentation/devicetree/bindings/usb/dwc3.txt | 22 ++++++++++++++++++++++ drivers/usb/dwc3/core.c | 24 ++++++++++++++++++++---- 2 files changed, 42 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt new file mode 100644 index 0000000..5e68eb6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -0,0 +1,22 @@ +synopsys DWC3 CORE + +DWC3- USB3 CONTROLLER + +Required properties: + - compatible: must be "synopsys,dwc3" + - reg : Address and length of the register set for the device + - interrupts: Interrupts used by the dwc3 controller. + - usb-phy : array of phandle for the PHY device + +Optional properties: + - tx-fifo-resize: determines if the FIFO *has* to be reallocated. + +This is usually a subnode to DWC3 glue to which it is connected. + +dwc3@4a030000 { + compatible = "synopsys,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4> + usb-phy = <&usb2_phy>, <&usb3,phy>; + tx-fifo-resize; +}; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 3a4004a..c1fb6d2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -420,13 +420,19 @@ static int dwc3_probe(struct platform_device *pdev) return -ENOMEM; } - dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (node) { + dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); + dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1); + } else { + dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); + } + if (IS_ERR_OR_NULL(dwc->usb2_phy)) { dev_err(dev, "no usb2 phy configured\n"); return -EPROBE_DEFER; } - dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); if (IS_ERR_OR_NULL(dwc->usb3_phy)) { dev_err(dev, "no usb3 phy configured\n"); return -EPROBE_DEFER; @@ -450,8 +456,7 @@ static int dwc3_probe(struct platform_device *pdev) else dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; - if (of_get_property(node, "tx-fifo-resize", NULL)) - dwc->needs_fifo_resize = true; + dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); pm_runtime_enable(dev); pm_runtime_get_sync(dev); @@ -580,11 +585,22 @@ static int dwc3_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id of_dwc3_match[] = { + { + .compatible = "synopsys,dwc3" + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_dwc3_match); +#endif + static struct platform_driver dwc3_driver = { .probe = dwc3_probe, .remove = dwc3_remove, .driver = { .name = "dwc3", + .of_match_table = of_match_ptr(of_dwc3_match), }, }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html