By simply setting a flag, we can drop some
boilerplate code.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/gadget/r8a66597-udc.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 5a80751..40ef4bd 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1837,7 +1837,6 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
clk_put(r8a66597->clk);
}
- device_unregister(&r8a66597->gadget.dev);
kfree(r8a66597);
return 0;
}
@@ -1915,17 +1914,12 @@ static int __init r8a66597_probe(struct platform_device *pdev)
r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
r8a66597->gadget.ops = &r8a66597_gadget_ops;
- dev_set_name(&r8a66597->gadget.dev, "gadget");
r8a66597->gadget.max_speed = USB_SPEED_HIGH;
r8a66597->gadget.dev.parent = &pdev->dev;
r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask;
r8a66597->gadget.dev.release = pdev->dev.release;
r8a66597->gadget.name = udc_name;
- ret = device_register(&r8a66597->gadget.dev);
- if (ret < 0) {
- dev_err(&pdev->dev, "device_register failed\n");
- goto clean_up;
- }
+ r8a66597->gadget.register_my_device = true;
init_timer(&r8a66597->timer);
r8a66597->timer.function = r8a66597_timer;
@@ -1939,7 +1933,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
clk_name);
ret = PTR_ERR(r8a66597->clk);
- goto clean_up_dev;
+ goto clean_up;
}
clk_enable(r8a66597->clk);
}
@@ -2007,8 +2001,6 @@ clean_up2:
clk_disable(r8a66597->clk);
clk_put(r8a66597->clk);
}
-clean_up_dev:
- device_unregister(&r8a66597->gadget.dev);
clean_up:
if (r8a66597) {
if (r8a66597->sudmac_reg)
--
1.8.1.rc1.5.g7e0651a
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
