Re: [V5 PATCH 26/26] usb: ehci: ehci-mv: add device tree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 24, 2013 at 06:38:50AM +0000, Chao Xie wrote:
> All blocks are removed. Add the device tree support for ehci.

Similarly to the last two patches, could you please add a binding document?

> Signed-off-by: Chao Xie <chao.xie@xxxxxxxxxxx>
> Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/usb/host/ehci-mv.c |  105 +++++++++++++++++++++++++++++++++----------
>  1 files changed, 80 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
> index 171e145..79eca0c 100644
> --- a/drivers/usb/host/ehci-mv.c
> +++ b/drivers/usb/host/ehci-mv.c
> @@ -13,6 +13,7 @@
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
>  #include <linux/clk.h>
> +#include <linux/of.h>
>  #include <linux/err.h>
>  #include <linux/usb/otg.h>
>  #include <linux/usb/mv_usb2.h>
> @@ -32,11 +33,9 @@ struct ehci_hcd_mv {
>  
>  	struct usb_phy *otg;
>  
> -	struct mv_usb_platform_data *pdata;
> -
>  	/* clock source and total clock number */
>  	unsigned int clknum;
> -	struct clk *clk[0];
> +	struct clk **clk;
>  };
>  
>  static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
> @@ -138,22 +137,55 @@ static const struct hc_driver mv_ehci_hc_driver = {
>  	.bus_resume = ehci_bus_resume,
>  };
>  
> +static int mv_ehci_parse_dt(struct platform_device *pdev,
> +				struct ehci_hcd_mv *ehci_mv)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	unsigned int clks_num;
> +	int i, ret;
> +	const char *clk_name;
> +
> +	if (!np)
> +		return 1;

Perhaps -ENODEV?

> +
> +	clks_num = of_property_count_strings(np, "clocks");
> +	if (clks_num < 0)
> +		return clks_num;
> +
> +	ehci_mv->clk = devm_kzalloc(&pdev->dev,
> +		sizeof(struct clk *) * clks_num, GFP_KERNEL);
> +	if (ehci_mv->clk == NULL)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < clks_num; i++) {
> +		ret = of_property_read_string_index(np, "clocks", i,
> +			&clk_name);
> +		if (ret)
> +			return ret;
> +		ehci_mv->clk[i] = clk_get(NULL, clk_name);
> +		if (IS_ERR(ehci_mv->clk[i]))
> +			return PTR_ERR(ehci_mv->clk[i]);
> +	}
> +
> +	ehci_mv->clknum = clks_num;
> +
> +	ret = of_property_read_u32(np, "mode", &ehci_mv->mode);
> +	if (ret)
> +		return ret;

Again, this is a bad idea.

> +
> +	return 0;
> +}
> +
>  static int mv_ehci_probe(struct platform_device *pdev)
>  {
> -	struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
>  	struct usb_hcd *hcd;
>  	struct ehci_hcd *ehci;
>  	struct ehci_hcd_mv *ehci_mv;
>  	struct resource *r;
> -	int clk_i, retval = -ENODEV;
> +	int retval = -ENODEV;
>  	u32 offset;
>  	size_t size;
>  
> -	if (!pdata) {
> -		dev_err(&pdev->dev, "missing platform_data\n");
> -		return -ENODEV;
> -	}
> -
>  	if (usb_disabled())
>  		return -ENODEV;
>  
> @@ -161,7 +193,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
>  	if (!hcd)
>  		return -ENOMEM;
>  
> -	size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum;
> +	size = sizeof(*ehci_mv);
>  	ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
>  	if (ehci_mv == NULL) {
>  		dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n");
> @@ -170,19 +202,36 @@ static int mv_ehci_probe(struct platform_device *pdev)
>  	}
>  
>  	platform_set_drvdata(pdev, ehci_mv);
> -	ehci_mv->pdata = pdata;
>  	ehci_mv->hcd = hcd;
>  
> -	ehci_mv->clknum = pdata->clknum;
> -	for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) {
> -		ehci_mv->clk[clk_i] =
> -		    devm_clk_get(&pdev->dev, pdata->clkname[clk_i]);
> -		if (IS_ERR(ehci_mv->clk[clk_i])) {
> -			dev_err(&pdev->dev, "error get clck \"%s\"\n",
> -				pdata->clkname[clk_i]);
> -			retval = PTR_ERR(ehci_mv->clk[clk_i]);
> -			goto err_clear_drvdata;
> +	retval = mv_ehci_parse_dt(pdev, ehci_mv);
> +	if (retval > 0) {

Is this why you returned 1 from mv_ehci_parse_dt? So you only do this if you
don't have a dt node?

If so, why not rip the check (and positive error code) out of mv_ehci_parse_dt,
and then here:

if (pdev->dev.of_node) {
	retval = mv_ehci_parse_dt(pdev, ehci_mv);
} else 
	fall back to mv_usb_platform_data ...
}

That makes it obvious that one side depends on dt and the other's a fallback,
and doesn't rely on nonstandard return code behaviour.

Also, why not return immediately if mv_ehci_parse_dt fails?

[...]

Thanks,
Mark.

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux