From: Stephen Warren <swarren@xxxxxxxxxx> The patch to add USB PHY nodes to device tree was written before Tegra supported the clocks property in device tree. Now that it does, add the required clocks properties to these nodes. This will allow all clk_get_sys() calls in tegra_usb_phy.c to be replaced by clk_get(phy->dev, clock_name), as part of converting the PHY driver to a platform driver. Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx> --- arch/arm/boot/dts/tegra20.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 2e9d1f0..d5e72ce 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -442,18 +442,24 @@ reg = <0xc5000400 0x3c00>; phy_type = "utmi"; nvidia,has-legacy-mode; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "utmi", "pll_u"; }; phy2: usb-phy@c5004400 { compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5004400 0x3c00>; phy_type = "ulpi"; + clocks = <&tegra_car 94>, <&tegra_car 127>; + clock-names = "ulpi", "pll_u"; }; phy3: usb-phy@c5008400 { compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5008400 0x3C00>; phy_type = "utmi"; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "utmi", "pll_u"; }; usb@c5000000 { -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html