As mach/hardware.h is deleted, we need to use platform_device_id to
differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has
already used pdata to differentiate runtime
Meanwhile we update the platform code accordingly.
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
arch/arm/mach-imx/devices/devices-common.h | 1 +
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 ++++----
drivers/usb/gadget/fsl_mxc_udc.c | 30 ++++++++--------
drivers/usb/gadget/fsl_udc_core.c | 38 ++++++++++++---------
4 files changed, 46 insertions(+), 38 deletions(-)
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 6277baf..9bd5777 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 37e4439..3c06bd9 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -11,35 +11,36 @@
#include "../hardware.h"
#include "devices-common.h"
-#define imx_fsl_usb2_udc_data_entry_single(soc) \
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX25);
+ imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX27);
+ imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX31);
+ imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX35);
+ imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX51);
+ imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
#endif
struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+ return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086..aa81ac5 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,8 +18,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-
static struct clk *mxc_ahb_clk;
static struct clk *mxc_per_clk;
static struct clk *mxc_ipg_clk;
@@ -58,8 +56,12 @@ int fsl_udc_clk_init(struct platform_device *pdev)
clk_prepare_enable(mxc_ahb_clk);
clk_prepare_enable(mxc_per_clk);
- /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
- if (!cpu_is_mx51()) {
+ /*
+ * Make sure USB_CLK is running at 60 MHz +/- 1000 Hz
+ * Only two types of udc currently, imx-udc-mx27 and
+ * imx-udc-mx51 (mx51 & mx53)
+ */
+ if (strcmp(pdev->id_entry->name, "imx-udc-mx27") == 0) {
freq = clk_get_rate(mxc_per_clk);
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
@@ -82,17 +84,15 @@ eclkrate:
void fsl_udc_clk_finalize(struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
- if (cpu_is_mx35()) {
- unsigned int v;
-
- /* workaround ENGcm09152 for i.MX35 */
- if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
- v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
- writel(v | USBPHYCTRL_EVDO,
- MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
- }
+ unsigned int v;
+
+ /* workaround ENGcm09152 for i.MX35 */
+ if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
+ v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
+ USBPHYCTRL_OTGBASE_OFFSET));
+ writel(v | USBPHYCTRL_EVDO,
+ MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
+ USBPHYCTRL_OTGBASE_OFFSET));
}
/* ULPI transceivers don't need usbpll */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c19f7f1..5fc1d72 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -41,6 +41,7 @@
#include <linux/fsl_devices.h>
#include <linux/dmapool.h>
#include <linux/delay.h>
+#include <linux/of_device.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -2438,11 +2439,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
unsigned int i;
u32 dccparams;
- if (strcmp(pdev->name, driver_name)) {
- VDBG("Wrong device");
- return -ENODEV;
- }
-
udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
if (udc_controller == NULL) {
ERR("malloc udc failed\n");
@@ -2756,22 +2752,32 @@ static int fsl_udc_otg_resume(struct device *dev)
return fsl_udc_resume(NULL);
}
-
/*-------------------------------------------------------------------------
Register entry point for the peripheral controller driver
--------------------------------------------------------------------------*/
-
+static const struct platform_device_id fsl_udc_devtype[] = {
+ {
+ .name = "imx-udc-mx27",
+ }, {
+ .name = "imx-udc-mx51",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
static struct platform_driver udc_driver = {
- .remove = __exit_p(fsl_udc_remove),
+ .remove = __exit_p(fsl_udc_remove),
+ /* Just for FSL i.mx SoC currently */
+ .id_table = fsl_udc_devtype,
/* these suspend and resume are not usb suspend and resume */
- .suspend = fsl_udc_suspend,
- .resume = fsl_udc_resume,
- .driver = {
- .name = (char *)driver_name,
- .owner = THIS_MODULE,
- /* udc suspend/resume called from OTG driver */
- .suspend = fsl_udc_otg_suspend,
- .resume = fsl_udc_otg_resume,
+ .suspend = fsl_udc_suspend,
+ .resume = fsl_udc_resume,
+ .driver = {
+ .name = (char *)driver_name,
+ .owner = THIS_MODULE,
+ /* udc suspend/resume called from OTG driver */
+ .suspend = fsl_udc_otg_suspend,
+ .resume = fsl_udc_otg_resume,
},
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
