Dear Ezequiel Garcia,
On Wed, 16 Jan 2013 16:16:59 -0300, Ezequiel Garcia wrote:
> >> + usb@d0050000 {
> >> + status = "okay";
> >> + };
> >> + usb@d0051000 {
> >> + status = "okay";
> >> + };
> >> + usb@d0052000 {
> >> + status = "okay";
> >> + };
> > USB2 of openblocks-ax3-4 is used as Mini-PCIE.
> > I think this is unnecessary.
>
> Mmm... could you explain this with some more detail.
> Unfortunately, I don't have access to an Openblocks board to check on
> this, so I'd appreciate any clarification.
>
> Is there any Openblocks datasheet or hardware schematics publicly
> available for me to look at?
As far as I know, there is no public document. I've been given access
to a PDF, in Japanese, that gives some details about the hardware.
>From what I can read, only 2 USB ports are used from the internal
Marvell EHCI controller.
Another USB port is available, but it is connected to a USB controller
that sits on the PCIe bus. And the PCIe interface on which this USB
controller is connected is not enabled in the default U-Boot shipped
with AX3-4 (at least not with the generation I have). I've been given
an U-Boot version that is supposed to enable this PCIe interface, but I
haven't tested yet.
Anyway, from a Marvell EHCI controller perspective, only two ports are
used, as Nobuhiro said. I am not sure which ports, but it seems like
the first two ones were used. One of the two physical ports is a
combined USB / eSATA port, but I don't think this makes any difference
at the software level.
I don't have the OpenBlocks AX3-4 with me right now, but I could
probably make a test on Friday.
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
