[RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is in preparation for the changes in PHY library to support adding
and getting multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done for OMAP platforms here.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
This kind-of binding should be done in all the platforms (I've done only
for OMAP platform). 
 arch/arm/mach-omap2/usb-musb.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 9d27e3f..bbe2fa5 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -24,6 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 
 #include "omap_device.h"
 #include "soc.h"
@@ -85,8 +86,12 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
-	if (cpu_is_omap44xx())
+	if (cpu_is_omap44xx()) {
 		musb_plat.has_mailbox = true;
+		usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+	} else if (cpu_is_omap34xx()) {
+		usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	}
 
 	if (soc_is_am35xx()) {
 		oh_name = "am35x_otg_hs";
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux