UPDATE transfer does not need any parameters. So, no need to prepare it. Signed-off-by: Pratyush Anand <pratyush.anand@xxxxxx> --- drivers/usb/dwc3/gadget.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 55d8bfd..d263b71 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -974,13 +974,14 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, } memset(¶ms, 0, sizeof(params)); - params.param0 = upper_32_bits(req->trb_dma); - params.param1 = lower_32_bits(req->trb_dma); - if (start_new) + if (start_new) { + params.param0 = upper_32_bits(req->trb_dma); + params.param1 = lower_32_bits(req->trb_dma); cmd = DWC3_DEPCMD_STARTTRANSFER; - else + } else { cmd = DWC3_DEPCMD_UPDATETRANSFER; + } cmd |= DWC3_DEPCMD_PARAM(cmd_param); ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html