This patch is to optimize xhci_find_realport_number(). Call
xhci_find_raw_port_number() to get real index in the HW port
status registers instead of scanning through the xHCI roothub
port array.
Signed-off-by: Lan Tianyu <tianyu.lan@xxxxxxxxx>
---
drivers/usb/host/xhci-mem.c | 36 ++++++++----------------------------
1 file changed, 8 insertions(+), 28 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 35616ff..6dc238c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1022,44 +1022,24 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
* is attached to (or the roothub port its ancestor hub is attached to). All we
* know is the index of that port under either the USB 2.0 or the USB 3.0
* roothub, but that doesn't give us the real index into the HW port status
- * registers. Scan through the xHCI roothub port array, looking for the Nth
- * entry of the correct port speed. Return the port number of that entry.
+ * registers. Call xhci_find_raw_port_number() to get real index.
*/
static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
struct usb_device *udev)
{
struct usb_device *top_dev;
- unsigned int num_similar_speed_ports;
- unsigned int faked_port_num;
- int i;
+ struct usb_hcd *hcd;
+
+ if (udev->speed == USB_SPEED_SUPER)
+ hcd = xhci->shared_hcd;
+ else
+ hcd = xhci->main_hcd;
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- faked_port_num = top_dev->portnum;
- for (i = 0, num_similar_speed_ports = 0;
- i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
- u8 port_speed = xhci->port_array[i];
-
- /*
- * Skip ports that don't have known speeds, or have duplicate
- * Extended Capabilities port speed entries.
- */
- if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
- continue;
- /*
- * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
- * 1.1 ports are under the USB 2.0 hub. If the port speed
- * matches the device speed, it's a similar speed port.
- */
- if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
- num_similar_speed_ports++;
- if (num_similar_speed_ports == faked_port_num)
- /* Roothub ports are numbered from 1 to N */
- return i+1;
- }
- return 0;
+ return xhci_find_raw_port_number(hcd, top_dev->portnum);
}
/* Setup an xHCI virtual device for a Set Address command */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
