The revision register should tell us how many ports are present.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/mfd/omap-usb-host.c | 32 +++++++++++++++++++++++++++-----
1 files changed, 27 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 13a3e8c..9c23a08 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -92,6 +92,8 @@
struct usbhs_hcd_omap {
+ int nports;
+
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
struct clk *utmi_p1_fck;
@@ -354,8 +356,6 @@ static void omap_usbhs_init(struct device *dev)
pm_runtime_get_sync(dev);
spin_lock_irqsave(&omap->lock, flags);
- omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
- dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
@@ -488,8 +488,32 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
+ platform_set_drvdata(pdev, omap);
+ pm_runtime_get_sync(dev);
- for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+ omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
+
+ /* we need to call runtime suspend before we update omap->nports
+ * to prevent unbalanced clk_disable()
+ */
+ pm_runtime_put_sync(dev);
+
+ switch (omap->usbhs_rev) {
+ case OMAP_USBHS_REV1:
+ omap->nports = 3;
+ break;
+ case OMAP_USBHS_REV2:
+ omap->nports = 2;
+ break;
+ default:
+ omap->nports = OMAP3_HS_USB_PORTS;
+ dev_dbg(dev,
+ "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
+ omap->usbhs_rev, omap->nports);
+ break;
+ }
+
+ for (i = 0; i < omap->nports; i++)
if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
is_ehci_hsic_mode(i)) {
omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
@@ -579,8 +603,6 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
"failed error:%d\n", ret);
}
- platform_set_drvdata(pdev, omap);
-
omap_usbhs_init(dev);
ret = omap_usbhs_alloc_children(pdev);
if (ret) {
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
