Hello.
On 28-11-2012 18:49, Roger Quadros wrote:
clk_set_parent is expected to fail on OMAP3 platforms. We don't
consider that as fatal so don't spam console.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/mfd/omap-usb-host.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 6ede319..493e010 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -653,17 +653,17 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
- /* for OMAP3 , the clk set paretn fails */
+ /* for OMAP3 , the clk set parent fails */
Worth removing spave before comma too.
ret = clk_set_parent(omap->utmi_clk[0],
omap->xclk60mhsp1_ck);
if (ret != 0)
- dev_err(dev, "xclk60mhsp1_ck set parent"
+ dev_dbg(dev, "xclk60mhsp1_ck set parent"
Need space at the end of this substring, else you get "parentfailed"
"failed error:%d\n", ret);
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
ret = clk_set_parent(omap->utmi_clk[0],
omap->init_60m_fclk);
if (ret != 0)
- dev_err(dev, "init_60m_fclk set parent"
+ dev_dbg(dev, "init_60m_fclk set parent"
Same here.
"failed error:%d\n", ret);
}
@@ -671,13 +671,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
ret = clk_set_parent(omap->utmi_clk[1],
omap->xclk60mhsp2_ck);
if (ret != 0)
- dev_err(dev, "xclk60mhsp2_ck set parent"
+ dev_dbg(dev, "xclk60mhsp2_ck set parent"
Same here.
"failed error:%d\n", ret);
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_clk[1],
omap->init_60m_fclk);
if (ret != 0)
- dev_err(dev, "init_60m_fclk set parent"
+ dev_dbg(dev, "init_60m_fclk set parent"
And here.
"failed error:%d\n", ret);
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
