Instead of using cpu_is_omap..() macros in the device driver we
rely on information provided in the platform data.
The only information we need is whether the USB Host module has
a single ULPI bypass control bit for all ports or individual bypass
control bits for each port. OMAP3 REV2.1 and earlier have the former.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
CC: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/usb-host.c | 4 ++++
arch/arm/plat-omap/include/plat/usb.h | 3 +++
drivers/mfd/omap-usb-host.c | 3 +--
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index eb85528..455b135 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -509,6 +509,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
if (cpu_is_omap34xx()) {
setup_ehci_io_mux(pdata->port_mode);
setup_ohci_io_mux(pdata->port_mode);
+
+ if (omap_rev() <= OMAP3430_REV_ES2_1)
+ usbhs_data.single_ulpi_bypass = true;
+
} else if (cpu_is_omap44xx()) {
setup_4430ehci_io_mux(pdata->port_mode);
setup_4430ohci_io_mux(pdata->port_mode);
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 6b618a1..3f2336a 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -65,6 +65,9 @@ struct usbhs_omap_platform_data {
struct ehci_hcd_omap_platform_data *ehci_data;
struct ohci_hcd_omap_platform_data *ohci_data;
+
+ /* OMAP3 <= ES2.1 have a single ulpi bypass control bit */
+ unsigned single_ulpi_bypass:1;
};
struct usbtll_omap_platform_data {
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 62e1f21..aaf272d 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -24,7 +24,6 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
-#include <plat/cpu.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>
@@ -400,7 +399,7 @@ static void omap_usbhs_init(struct device *dev)
reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
/* Bypass the TLL module for PHY mode operation */
- if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+ if (pdata->single_ulpi_bypass) {
dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
if (is_ehci_phy_mode(pdata->port_mode[0]) ||
is_ehci_phy_mode(pdata->port_mode[1]) ||
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
