> > This patchset adds fully tested otg id switch function and > vbus connect/disconnect detection for chipidea driver. > The mainly design of id/vbus handling follows msm otg driver. > I hope the msm usb maintainer can have a look of this patchset, > and give some comments, and move the whole msm usb driver to > chipidea framework if possible in the future. > > This patchset is fully tested at i.mx6Q saberlite board after adding > one pinctrl workaround(https://github.com/hzpeterchen/linux- > usb/commit/777425d693885a5f921a4b0bca45653a06e360dc) > > There is github repo for my chipdiea branch: > https://github.com/hzpeterchen/linux-usb.git > Hi Alexander, would you give some comments about this serial? Thanks. Peter > Peter Chen (4): > Revert "USB: chipidea: add vbus detect for udc" > usb: chipidea: add otg id switch and vbus connect/disconnect detect > usb: chipidea: udc: add pullup/pulldown dp at hw_device_state > usb: chipidea: imx: add internal vbus regulator control > > drivers/usb/chipidea/Makefile | 2 +- > drivers/usb/chipidea/bits.h | 10 ++ > drivers/usb/chipidea/ci.h | 9 ++- > drivers/usb/chipidea/ci13xxx_imx.c | 67 ++++++++--- > drivers/usb/chipidea/core.c | 217 > +++++++++++++++++++++++++++++++++--- > drivers/usb/chipidea/otg.c | 60 ++++++++++ > drivers/usb/chipidea/otg.h | 6 + > drivers/usb/chipidea/udc.c | 47 ++------ > 8 files changed, 342 insertions(+), 76 deletions(-) > create mode 100644 drivers/usb/chipidea/otg.c > create mode 100644 drivers/usb/chipidea/otg.h > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
