Hi,
On Wed, Nov 7, 2012 at 10:48 PM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> Hi Vivek, Felipe,
>
> On Wednesday 07 of November 2012 18:43:22 Felipe Balbi wrote:
>> Hi,
>>
>> On Wed, Nov 07, 2012 at 06:55:03PM +0530, Vivek Gautam wrote:
>> > Hi,
>> >
>> > On Tue, Nov 6, 2012 at 10:13 PM, Felipe Balbi <balbi@xxxxxx> wrote:
>> > > On Tue, Nov 06, 2012 at 08:58:49PM +0530, Vivek Gautam wrote:
>> > >> Adding DWC3 device tree node for Exynos5250 along with the
>> > >> device address and clock support needed for the controller.
>> > >>
>> > >> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>> > >> ---
>> > >>
>> > >> arch/arm/boot/dts/exynos5250.dtsi | 6 ++++++
>> > >> arch/arm/mach-exynos/clock-exynos5.c | 24
>> > >> ++++++++++++++++++++++++
>> > >> arch/arm/mach-exynos/include/mach/map.h | 1 +
>> > >> arch/arm/mach-exynos/mach-exynos5-dt.c | 2 ++
>> > >> drivers/usb/Kconfig | 1 +
>> > >> 5 files changed, 34 insertions(+), 0 deletions(-)
>> > >>
>> > >> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
>> > >> b/arch/arm/boot/dts/exynos5250.dtsi index cf6a02d..52bca54 100644
>> > >> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> > >> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> > >> @@ -68,6 +68,12 @@
>> > >>
>> > >> interrupts = <0 96 0>;
>> > >>
>> > >> };
>> > >>
>> > >> + dwc3 {
>> > >
>> > > shouldn't this be usb@12000000 ??
>> >
>> > Kept this in accordance with controller's name, similar to the change
>> > in following:
>> > http://www.mail-archive.com/linux-samsung-soc@xxxxxxxxxxxxxxx/msg12800.
>> > html
>> >
>> > Needs to be changed ?
>>
>> I'll leave it to DT experts, but I was under the impression that we
>> should be using generic functionality names (usb, i2c, spi, uart, gpio,
>> etc) instead of the IP name. IP name is something more for compatible
>> flag.
>>
>> Don't take my word for it though :-) DT experts are the ones with final
>> saying
>
> Wrt node name, as far as I am aware of, there is no strict convention of
> naming nodes, but the way you suggested is better in terms of readability -
> you don't have to know this particular IP to find out what it is used for.
>
> Similar thing is with @addr in node names. I've been always adding @addr to
> the name whenever the node had reg property inside (with the same address
> of course), but I'm not sure if there is a strict convention here.
>
Better to make things more readable ;-)
It will be nice that i change this to dwc3 as well as ehci and ohci in
the change:
http://www.mail-archive.com/linux-samsung-soc@xxxxxxxxxxxxxxx/msg12800.
Thanks for suggestions.
I shall also update the Documentation/devicetree/bindings. I missed
that here :-(
> Best regards,
> Tomasz Figa
>
--
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
