[PATCH 2/3] USB: EHCI: make ehci-pci a separate driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch (as1625) splits the PCI portion of ehci-hcd out into its
own separate driver module, called ehci-pci.  Consistently with the
current practice, the decision whether to build this module is not
user-configurable.  If EHCI and PCI are enabled then the module will
be built, always.

Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
CC: Felipe Balbi <balbi@xxxxxx>

---

 drivers/usb/host/Kconfig    |    5 ++
 drivers/usb/host/Makefile   |    2 
 drivers/usb/host/ehci-hcd.c |   26 ++---------
 drivers/usb/host/ehci-pci.c |  101 ++++++++++++++++++++------------------------
 4 files changed, 60 insertions(+), 74 deletions(-)

Index: usb-3.7/drivers/usb/host/Kconfig
===================================================================
--- usb-3.7.orig/drivers/usb/host/Kconfig
+++ usb-3.7/drivers/usb/host/Kconfig
@@ -95,6 +95,11 @@ config USB_EHCI_TT_NEWSCHED
 
 	  If unsure, say Y.
 
+config USB_EHCI_PCI
+	tristate
+	depends on USB_EHCI_HCD && PCI
+	default y
+
 config USB_EHCI_HCD_PMC_MSP
 	tristate "EHCI support for on-chip PMC MSP71xx USB controller"
 	depends on USB_EHCI_HCD && MSP_HAS_USB
Index: usb-3.7/drivers/usb/host/Makefile
===================================================================
--- usb-3.7.orig/drivers/usb/host/Makefile
+++ usb-3.7/drivers/usb/host/Makefile
@@ -24,6 +24,8 @@ obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 obj-$(CONFIG_PCI)		+= pci-quirks.o
 
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
+obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
+
 obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
 obj-$(CONFIG_USB_ISP1362_HCD)	+= isp1362-hcd.o
Index: usb-3.7/drivers/usb/host/ehci-hcd.c
===================================================================
--- usb-3.7.orig/drivers/usb/host/ehci-hcd.c
+++ usb-3.7/drivers/usb/host/ehci-hcd.c
@@ -1252,11 +1252,6 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR (DRIVER_AUTHOR);
 MODULE_LICENSE ("GPL");
 
-#ifdef CONFIG_PCI
-#include "ehci-pci.c"
-#define	PCI_DRIVER		ehci_pci_driver
-#endif
-
 #ifdef CONFIG_USB_EHCI_FSL
 #include "ehci-fsl.c"
 #define	PLATFORM_DRIVER		ehci_fsl_driver
@@ -1367,9 +1362,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_platform_driver
 #endif
 
-#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-    !defined(XILINX_OF_PLATFORM_DRIVER)
+#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
+	!defined(PLATFORM_DRIVER) && \
+	!defined(PS3_SYSTEM_BUS_DRIVER) && \
+	!defined(OF_PLATFORM_DRIVER) && \
+	!defined(XILINX_OF_PLATFORM_DRIVER)
 #error "missing bus glue for ehci-hcd"
 #endif
 
@@ -1406,12 +1403,6 @@ static int __init ehci_hcd_init(void)
 		goto clean0;
 #endif
 
-#ifdef PCI_DRIVER
-	retval = pci_register_driver(&PCI_DRIVER);
-	if (retval < 0)
-		goto clean1;
-#endif
-
 #ifdef PS3_SYSTEM_BUS_DRIVER
 	retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
 	if (retval < 0)
@@ -1443,10 +1434,6 @@ clean3:
 	ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 clean2:
 #endif
-#ifdef PCI_DRIVER
-	pci_unregister_driver(&PCI_DRIVER);
-clean1:
-#endif
 #ifdef PLATFORM_DRIVER
 	platform_driver_unregister(&PLATFORM_DRIVER);
 clean0:
@@ -1472,9 +1459,6 @@ static void __exit ehci_hcd_cleanup(void
 #ifdef PLATFORM_DRIVER
 	platform_driver_unregister(&PLATFORM_DRIVER);
 #endif
-#ifdef PCI_DRIVER
-	pci_unregister_driver(&PCI_DRIVER);
-#endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
 	ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 #endif
Index: usb-3.7/drivers/usb/host/ehci-pci.c
===================================================================
--- usb-3.7.orig/drivers/usb/host/ehci-pci.c
+++ usb-3.7/drivers/usb/host/ehci-pci.c
@@ -18,9 +18,18 @@
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue.  CONFIG_PCI must be defined."
-#endif
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "EHCI PCI platform driver"
+
+static const char hcd_name[] = "ehci-pci";
 
 /* defined here to avoid adding to pci_ids.h for single instance use */
 #define PCI_DEVICE_ID_INTEL_CE4100_USB	0x2e70
@@ -315,11 +324,6 @@ done:
  * Also they depend on separate root hub suspend/resume.
  */
 
-static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
-{
-	return ehci_suspend(hcd, do_wakeup);
-}
-
 static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
 {
 	return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
@@ -370,55 +374,18 @@ static int ehci_pci_resume(struct usb_hc
 		(void) ehci_pci_reinit(ehci, pdev);
 	return 0;
 }
-#endif
 
-static const struct hc_driver ehci_pci_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"EHCI Host Controller",
-	.hcd_priv_size =	sizeof(struct ehci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ehci_irq,
-	.flags =		HCD_MEMORY | HCD_USB2,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset =		ehci_pci_setup,
-	.start =		ehci_run,
-#ifdef	CONFIG_PM
-	.pci_suspend =		ehci_pci_suspend,
-	.pci_resume =		ehci_pci_resume,
-#endif
-	.stop =			ehci_stop,
-	.shutdown =		ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ehci_urb_enqueue,
-	.urb_dequeue =		ehci_urb_dequeue,
-	.endpoint_disable =	ehci_endpoint_disable,
-	.endpoint_reset =	ehci_endpoint_reset,
+#else
 
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ehci_get_frame,
+#define ehci_suspend		NULL
+#define ehci_pci_resume		NULL
+#endif	/* CONFIG_PM */
 
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ehci_hub_status_data,
-	.hub_control =		ehci_hub_control,
-	.bus_suspend =		ehci_bus_suspend,
-	.bus_resume =		ehci_bus_resume,
-	.relinquish_port =	ehci_relinquish_port,
-	.port_handed_over =	ehci_port_handed_over,
+static struct hc_driver __read_mostly ehci_pci_hc_driver;
 
-	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+static const struct ehci_driver_overrides overrides = {
+	.product_desc =		"EHCI PCI host controller",
+	.reset =		ehci_pci_setup,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -451,3 +418,31 @@ static struct pci_driver ehci_pci_driver
 	},
 #endif
 };
+
+static int __init ehci_pci_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ehci_init_driver(&ehci_pci_hc_driver, &overrides);
+
+	/* Entries for the PCI suspend/resume callbacks are special */
+	ehci_pci_hc_driver.pci_suspend = ehci_suspend;
+	ehci_pci_hc_driver.pci_resume = ehci_pci_resume;
+
+	return pci_register_driver(&ehci_pci_driver);
+}
+module_init(ehci_pci_init);
+
+static void __exit ehci_pci_cleanup(void)
+{
+	pci_unregister_driver(&ehci_pci_driver);
+}
+module_exit(ehci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux