Make sure to allocate the control-message buffer dynamically as some
platforms cannot do DMA from stack.
Note that only the first byte of the old buffer was used.
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/opticon.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 41b1647..459c288 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -155,7 +155,11 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
{
struct usb_serial *serial = port->serial;
int retval;
- u8 buffer[2];
+ u8 *buffer;
+
+ buffer = kzalloc(1, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
buffer[0] = val;
/* Send the message to the vendor control endpoint
@@ -164,6 +168,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
requesttype,
USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
0, 0, buffer, 1, 0);
+ kfree(buffer);
return retval;
}
--
1.7.12.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
