There's no need to have this file in plat/fpga.h. We can
make it local to plat-omap replacing fpga_read/write
functions directly with readb/writeb as that's how
they are already defined in fpga.h.
Note that 2420 based H4 is also using the fpga, so let's
keep the led support around in plat-omap until we flip
over mach-omap2 to device tree.
Cc: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Cc: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
Cc: linux-fbdev@xxxxxxxxxxxxxxx
Cc: Felipe Balbi <balbi@xxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap1/board-fsample.c | 6 -
arch/arm/mach-omap1/board-innovator.c | 26 ++--
arch/arm/mach-omap1/board-perseus2.c | 6 -
arch/arm/mach-omap1/common.h | 1
arch/arm/mach-omap1/fpga.c | 2
arch/arm/mach-omap1/include/mach/omap1510.h | 113 ++++++++++++++++
arch/arm/mach-omap1/serial.c | 1
arch/arm/plat-omap/debug-leds.c | 2
arch/arm/plat-omap/fpga.h | 74 ++++++++++
arch/arm/plat-omap/include/plat/fpga.h | 193 ---------------------------
drivers/usb/host/ohci-omap.c | 5 -
drivers/video/omap/lcd_inn1510.c | 7 +
12 files changed, 216 insertions(+), 220 deletions(-)
create mode 100644 arch/arm/plat-omap/fpga.h
delete mode 100644 arch/arm/plat-omap/include/plat/fpga.h
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 4b6de70..6f496df 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -30,7 +30,7 @@
#include <plat/tc.h>
#include <mach/mux.h>
#include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
@@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = {
static void __init fsample_init_smc91x(void)
{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index db5f7d2..5804da7 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -33,7 +33,7 @@
#include <mach/mux.h>
#include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
#include <plat/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <plat/mmc.h>
@@ -215,7 +215,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
static int innovator_get_pendown_state(void)
{
- return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+ return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
}
static const struct ads7846_platform_data innovator1510_ts_info = {
@@ -279,7 +279,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
static void __init innovator_init_smc91x(void)
{
if (cpu_is_omap1510()) {
- fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
OMAP1510_FPGA_RST);
udelay(750);
} else {
@@ -335,10 +335,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (power_on)
- fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
OMAP1510_FPGA_POWER);
else
- fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
OMAP1510_FPGA_POWER);
return 0;
@@ -390,14 +390,14 @@ static void __init innovator_init(void)
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
- reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM1_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
- reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM2_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@@ -437,6 +437,7 @@ static void __init innovator_init(void)
*/
static void __init innovator_map_io(void)
{
+#ifdef CONFIG_ARCH_OMAP15XX
omap15xx_map_io();
iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@@ -444,9 +445,10 @@ static void __init innovator_map_io(void)
/* Dump the Innovator FPGA rev early - useful info for support. */
pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510_FPGA_REV_HIGH),
- fpga_read(OMAP1510_FPGA_REV_LOW),
- fpga_read(OMAP1510_FPGA_BOARD_REV));
+ __raw_readb(OMAP1510_FPGA_REV_HIGH),
+ __raw_readb(OMAP1510_FPGA_REV_LOW),
+ __raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 198b054..a1cdeeb 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -30,7 +30,7 @@
#include <plat/tc.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
#include <mach/flash.h>
#include <mach/hardware.h>
@@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
static void __init perseus2_init_smc91x(void)
{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 9f2d8b6..26e19d3 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -41,6 +41,7 @@ static inline void omap7xx_map_io(void)
#endif
#ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
void omap15xx_map_io(void);
#else
static inline void omap15xx_map_io(void)
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 29ec50f..4ec220d 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,7 +27,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 8fe05d6..3d23524 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -45,5 +45,118 @@
#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+/*
+ * ---------------------------------------------------------------------------
+ * OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
+#define OMAP1510_FPGA_SIZE SZ_4K
+#define OMAP1510_FPGA_START 0x08000000 /* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE 0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
+#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
+#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
+#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b9d6834..d1ac080 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -23,7 +23,6 @@
#include <asm/mach-types.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include "pm.h"
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index ea29bbe..feca128 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -20,7 +20,7 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <plat/fpga.h>
+#include "fpga.h"
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
diff --git a/arch/arm/plat-omap/fpga.h b/arch/arm/plat-omap/fpga.h
new file mode 100644
index 0000000..54faaa9
--- /dev/null
+++ b/arch/arm/plat-omap/fpga.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@xxxxxxxxxxxx>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
+#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
+#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
+
+/* NOTE: most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+ /* offset 0x00 */
+ u16 smc91x[8];
+ /* offset 0x10 */
+ u16 fpga_rev;
+ u16 board_rev;
+ u16 gpio_outputs;
+ u16 leds;
+ /* offset 0x18 */
+ u16 misc_inputs;
+ u16 lan_status;
+ u16 lan_reset;
+ u16 reserved0;
+ /* offset 0x20 */
+ u16 ps2_data;
+ u16 ps2_ctrl;
+ /* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
+/* cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
deleted file mode 100644
index bd3c632..0000000
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@xxxxxxxxxxxx>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@xxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-extern void omap1510_fpga_init_irq(void);
-
-#define fpga_read(reg) __raw_readb(reg)
-#define fpga_write(val, reg) __raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- * H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
-#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
-#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
-#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
-
-/* NOTE: most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
- /* offset 0x00 */
- u16 smc91x[8];
- /* offset 0x10 */
- u16 fpga_rev;
- u16 board_rev;
- u16 gpio_outputs;
- u16 leds;
- /* offset 0x18 */
- u16 misc_inputs;
- u16 lan_status;
- u16 lan_reset;
- u16 reserved0;
- /* offset 0x20 */
- u16 ps2_data;
- u16 ps2_ctrl;
- /* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
-#define H2P2_DBG_FPGA_LED_RED (1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
-/* cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- * OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
-#define OMAP1510_FPGA_SIZE SZ_4K
-#define OMAP1510_FPGA_START 0x08000000 /* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE 0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
-#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
-#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
-#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd (1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4531d03..439e6e4 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,7 +25,6 @@
#include <asm/mach-types.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -93,14 +92,14 @@ static int omap_ohci_transceiver_power(int on)
{
if (on) {
if (machine_is_omap_innovator() && cpu_is_omap1510())
- fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+ __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
tps65010_set_gpio_out_value(GPIO1, LOW);
} else {
if (machine_is_omap_innovator() && cpu_is_omap1510())
- fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+ __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index b38b1dd..2ee4232 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,7 +23,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <plat/fpga.h>
+#include <mach/hardware.h>
+
#include "omapfb.h"
static int innovator1510_panel_init(struct lcd_panel *panel,
@@ -38,13 +39,13 @@ static void innovator1510_panel_cleanup(struct lcd_panel *panel)
static int innovator1510_panel_enable(struct lcd_panel *panel)
{
- fpga_write(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+ __raw_writeb(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
return 0;
}
static void innovator1510_panel_disable(struct lcd_panel *panel)
{
- fpga_write(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+ __raw_writeb(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
}
static unsigned long innovator1510_panel_get_caps(struct lcd_panel *panel)
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
