If a USB transfer has already been started, meaning we have already issued StartTransfer command to that particular endpoint, DWC3_EP_BUSY flag has also already been set. When we try to cancel this transfer which is already in controller's cache, we will not receive XferComplete event and we must clear DWC3_EP_BUSY in order to allow subsequent requests to be properly started. The best place to clear that flag is right after issuing DWC3_DEPCMD_ENDTRANSFER. Cc: stable@xxxxxxxxxxxxxxx # v3.4 v3.5 v3.6 Reported-by: Moiz Sonasath <m-sonasath@xxxxxx> Signed-off-by: Felipe Balbi <balbi@xxxxxx> --- If nobody has anything against this, I will line this up for v3.7-rc series once merge window is closed. cheers drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c9e729a..7b7dedd 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1904,7 +1904,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; - + dep->flags &= ~DWC3_EP_BUSY; udelay(100); } -- 1.8.0.rc0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
