From: Pratyush ANAND <pratyush.anand@xxxxxx>
When we reach to link trb, we just need to increase free_slot and then
calculate TRB. Return is not correct, as it will cause wrong TRB DMA
address to fetch in case of update transfer.
Signed-off-by: Pratyush Anand <pratyush.anand@xxxxxx>
---
drivers/usb/dwc3/gadget.c | 13 +++++--------
1 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b88a8a3..783bc87 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -774,21 +774,18 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
struct dwc3 *dwc = dep->dwc;
struct dwc3_trb *trb;
- unsigned int cur_slot;
-
dev_vdbg(dwc->dev, "%s: req %p dma %08llx length %d%s%s\n",
dep->name, req, (unsigned long long) dma,
length, last ? " last" : "",
chain ? " chain" : "");
- trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
- cur_slot = dep->free_slot;
- dep->free_slot++;
-
/* Skip the LINK-TRB on ISOC */
- if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
+ if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
usb_endpoint_xfer_isoc(dep->endpoint.desc))
- return;
+ dep->free_slot++;
+
+ trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
+ dep->free_slot++;
if (!req->trb) {
dwc3_gadget_move_request_queued(req);
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
