The default 10 microsecond delay for the controller to come out of
halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond.
This is based on emperical testing on various USB debug ports on
modern machines such as a Lenovo X220i and an Ivybridge development
platform that needed to wait ~450-950 microseconds.
Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
drivers/usb/early/ehci-dbgp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index ee0ebac..89dcf15 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -450,7 +450,7 @@ static int dbgp_ehci_startup(void)
writel(FLAG_CF, &ehci_regs->configured_flag);
/* Wait until the controller is no longer halted */
- loop = 10;
+ loop = 1000;
do {
status = readl(&ehci_regs->status);
if (!(status & STS_HALT))
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
