From: Ajay Kumar Gupta <ajay.gupta@xxxxxx> Added device tree support for dsps musb glue driver and updated the Documentation with device tree binding information. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx> Signed-off-by: Ravi B <ravibabu@xxxxxx> --- .../devicetree/bindings/usb/am33xx-usb.txt | 14 +++++ drivers/usb/musb/musb_dsps.c | 60 +++++++++++++++++--- 2 files changed, 65 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/am33xx-usb.txt diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt new file mode 100644 index 0000000..ca8fa56 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -0,0 +1,14 @@ +AM33XX MUSB GLUE + - compatible : Should be "ti,musb-am33xx" + - ti,hwmods : must be "usb_otg_hs" + - multipoint : Should be "1" indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. + - num_eps : Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to "16" + - ram_bits : Specifies the ram address size. Should be set to "12" + - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2" + represents PERIPHERAL. + - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2" + represents PERIPHERAL. + - power : Should be "250". This signifies the controller can supply upto + 500mA when operating in host mode. diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 4fcfa1a..67d1f00 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -31,6 +31,7 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/err.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> @@ -45,6 +46,10 @@ #include "musb_core.h" +#ifdef CONFIG_OF +static const struct of_device_id musb_dsps_of_match[]; +#endif + /** * avoid using musb_readx()/musb_writex() as glue layer should not be * dependent on musb core layer symbols. @@ -501,6 +506,8 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) struct device *dev = glue->dev; struct platform_device *pdev = to_platform_device(dev); struct musb_hdrc_platform_data *pdata = dev->platform_data; + struct device_node *np = pdev->dev.of_node; + struct musb_hdrc_config *config; struct platform_device *musb; struct resource *res; struct resource resources[2]; @@ -567,14 +574,40 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id) glue->musb[id] = musb; - pdata->platform_ops = &dsps_ops; - ret = platform_device_add_resources(musb, resources, 2); if (ret) { dev_err(dev, "failed to add resources\n"); goto err2; } + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, + "failed to allocate musb platfrom data\n"); + ret = -ENOMEM; + goto err2; + } + + config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); + if (!config) { + dev_err(&pdev->dev, + "failed to allocate musb hdrc config\n"); + goto err2; + } + + of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); + sprintf(res_name, "port%d_mode", id); + of_property_read_u32(np, res_name, (u32 *)&pdata->mode); + of_property_read_u32(np, "power", (u32 *)&pdata->power); + config->multipoint = of_property_read_bool(np, "multipoint"); + + pdata->config = config; + } + + pdata->platform_ops = &dsps_ops; + ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(dev, "failed to add platform_data\n"); @@ -606,14 +639,22 @@ static void __devexit dsps_delete_musb_pdev(struct dsps_glue *glue, u8 id) static int __devinit dsps_probe(struct platform_device *pdev) { - const struct platform_device_id *id = platform_get_device_id(pdev); - const struct dsps_musb_wrapper *wrp = - (struct dsps_musb_wrapper *)id->driver_data; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + const struct dsps_musb_wrapper *wrp; struct dsps_glue *glue; struct resource *iomem; u32 __iomem *usbss; int ret, i; + match = of_match_node(musb_dsps_of_match, np); + if (!match) { + dev_err(&pdev->dev, "fail to get matching of_match struct\n"); + ret = -EINVAL; + goto err0; + } + wrp = match->data; + /* allocate glue */ glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -773,13 +814,14 @@ static const struct platform_device_id musb_dsps_id_table[] __devinitconst = { }; MODULE_DEVICE_TABLE(platform, musb_dsps_id_table); +#ifdef CONFIG_OF static const struct of_device_id musb_dsps_of_match[] __devinitconst = { - { .compatible = "musb-ti81xx", }, - { .compatible = "ti,ti81xx-musb", }, - { .compatible = "ti,am335x-musb", }, + { .compatible = "ti,musb-am33xx", + .data = (void *) &ti81xx_driver_data, }, { }, }; MODULE_DEVICE_TABLE(of, musb_dsps_of_match); +#endif static struct platform_driver dsps_usbss_driver = { .probe = dsps_probe, @@ -787,7 +829,7 @@ static struct platform_driver dsps_usbss_driver = { .driver = { .name = "musb-dsps", .pm = &dsps_pm_ops, - .of_match_table = musb_dsps_of_match, + .of_match_table = of_match_ptr(musb_dsps_of_match), }, .id_table = musb_dsps_id_table, }; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html