Added device tree support for dsps musb glue driver and updated the
Documentation with device tree binding information.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
---
.../devicetree/bindings/usb/am33xx-usb.txt | 14 +++++
drivers/usb/musb/musb_dsps.c | 60 +++++++++++++++++---
2 files changed, 65 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/am33xx-usb.txt
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
new file mode 100644
index 0000000..ca8fa56
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -0,0 +1,14 @@
+AM33XX MUSB GLUE
+ - compatible : Should be "ti,musb-am33xx"
+ - ti,hwmods : must be "usb_otg_hs"
+ - multipoint : Should be "1" indicating the musb controller supports
+ multipoint. This is a MUSB configuration-specific setting.
+ - num_eps : Specifies the number of endpoints. This is also a
+ MUSB configuration-specific setting. Should be set to "16"
+ - ram_bits : Specifies the ram address size. Should be set to "12"
+ - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
+ represents PERIPHERAL.
+ - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2"
+ represents PERIPHERAL.
+ - power : Should be "250". This signifies the controller can supply upto
+ 500mA when operating in host mode.
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 9fcacff..ac9f58b 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -31,6 +31,7 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
@@ -45,6 +46,10 @@
#include "musb_core.h"
+#ifdef CONFIG_OF
+static const struct of_device_id musb_dsps_of_match[];
+#endif
+
/**
* avoid using musb_readx()/musb_writex() as glue layer should not be
* dependent on musb core layer symbols.
@@ -496,6 +501,8 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
struct device *dev = glue->dev;
struct platform_device *pdev = to_platform_device(dev);
struct musb_hdrc_platform_data *pdata = dev->platform_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct musb_hdrc_config *config;
struct platform_device *musb;
struct resource *res;
struct resource resources[2];
@@ -562,14 +569,40 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
glue->musb[id] = musb;
- pdata->platform_ops = &dsps_ops;
-
ret = platform_device_add_resources(musb, resources, 2);
if (ret) {
dev_err(dev, "failed to add resources\n");
goto err2;
}
+ if (np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev,
+ "failed to allocate musb platfrom data\n");
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
+ if (!config) {
+ dev_err(&pdev->dev,
+ "failed to allocate musb hdrc config\n");
+ goto err2;
+ }
+
+ of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps);
+ of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits);
+ sprintf(res_name, "port%d_mode", id);
+ of_property_read_u32(np, res_name, (u32 *)&pdata->mode);
+ of_property_read_u32(np, "power", (u32 *)&pdata->power);
+ config->multipoint = of_property_read_bool(np, "multipoint");
+
+ pdata->config = config;
+ }
+
+ pdata->platform_ops = &dsps_ops;
+
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(dev, "failed to add platform_data\n");
@@ -601,14 +634,22 @@ static void __devexit dsps_delete_musb_pdev(struct dsps_glue *glue, u8 id)
static int __devinit dsps_probe(struct platform_device *pdev)
{
- const struct platform_device_id *id = platform_get_device_id(pdev);
- const struct dsps_musb_wrapper *wrp =
- (struct dsps_musb_wrapper *)id->driver_data;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ const struct dsps_musb_wrapper *wrp;
struct dsps_glue *glue;
struct resource *iomem;
u32 __iomem *usbss;
int ret, i;
+ match = of_match_node(musb_dsps_of_match, np);
+ if (!match) {
+ dev_err(&pdev->dev, "fail to get matching of_match struct\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+ wrp = match->data;
+
/* allocate glue */
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
@@ -768,13 +809,14 @@ static const struct platform_device_id musb_dsps_id_table[] __devinitconst = {
};
MODULE_DEVICE_TABLE(platform, musb_dsps_id_table);
+#ifdef CONFIG_OF
static const struct of_device_id musb_dsps_of_match[] __devinitconst = {
- { .compatible = "musb-ti81xx", },
- { .compatible = "ti,ti81xx-musb", },
- { .compatible = "ti,am335x-musb", },
+ { .compatible = "ti,musb-am33xx",
+ .data = (void *) &ti81xx_driver_data, },
{ },
};
MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
+#endif
static struct platform_driver dsps_usbss_driver = {
.probe = dsps_probe,
@@ -782,7 +824,7 @@ static struct platform_driver dsps_usbss_driver = {
.driver = {
.name = "musb-dsps",
.pm = &dsps_pm_ops,
- .of_match_table = musb_dsps_of_match,
+ .of_match_table = of_match_ptr(musb_dsps_of_match),
},
.id_table = musb_dsps_id_table,
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
