[This message is more a less the same as sent to the Debian BTS <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678215>.] Dear Linux folks, after replacing a broken PS/2 mouse, which worked fine before that, with an USB mouse $ lsusb # output from after the resume and replugged Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 046d:c30f Logitech, Inc. Logicool HID-Compliant Keyboard (106 key) Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub Bus 003 Device 003: ID 1241:1122 Belkin Typhoon Stream Optical Mouse USB+PS/2 the mouse is not working after resuming from suspend to RAM. Replugging the mouse works although that is quite inconvenient. $ dmesg | grep -i usb [ 1.526486] usbcore: registered new interface driver usbfs [ 1.526515] usbcore: registered new interface driver hub [ 1.531004] usbcore: registered new device driver usb [ 1.531600] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.531688] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 1.531720] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 1.540144] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.540202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.540205] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.540208] usb usb1: Product: EHCI Host Controller [ 1.540210] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd [ 1.540213] usb usb1: SerialNumber: 0000:00:13.5 [ 1.540349] hub 1-0:1.0: USB hub found [ 1.540878] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.540939] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.600050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.600056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.600059] usb usb2: Product: OHCI Host Controller [ 1.600062] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd [ 1.600064] usb usb2: SerialNumber: 0000:00:13.0 [ 1.600228] hub 2-0:1.0: USB hub found [ 1.603453] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.660039] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.660042] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.660045] usb usb3: Product: OHCI Host Controller [ 1.660047] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd [ 1.660050] usb usb3: SerialNumber: 0000:00:13.1 [ 1.660210] hub 3-0:1.0: USB hub found [ 1.660571] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.720027] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.720031] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.720034] usb usb4: Product: OHCI Host Controller [ 1.720036] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd [ 1.720039] usb usb4: SerialNumber: 0000:00:13.2 [ 1.720200] hub 4-0:1.0: USB hub found [ 1.720309] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.780066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.780069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.780072] usb usb5: Product: OHCI Host Controller [ 1.780074] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd [ 1.780076] usb usb5: SerialNumber: 0000:00:13.3 [ 1.780246] hub 5-0:1.0: USB hub found [ 1.780584] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.840051] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.840054] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.840057] usb usb6: Product: OHCI Host Controller [ 1.840059] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd [ 1.840062] usb usb6: SerialNumber: 0000:00:13.4 [ 1.840220] hub 6-0:1.0: USB hub found [ 2.228017] usb 2-1: new low-speed USB device number 2 using ohci_hcd [ 2.401061] usb 2-1: New USB device found, idVendor=046d, idProduct=c30f [ 2.401066] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.401070] usb 2-1: Product: Logitech USB Keyboard [ 2.401072] usb 2-1: Manufacturer: Logitech [ 2.412420] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input0 [ 2.412556] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input0 [ 2.425234] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input1 [ 2.425360] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input1 [ 2.425388] usbcore: registered new interface driver usbhid [ 2.425391] usbhid: USB HID core driver [ 2.664032] usb 2-2: new full-speed USB device number 3 using ohci_hcd [ 2.831057] usb 2-2: New USB device found, idVendor=058f, idProduct=9254 [ 2.831063] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.831066] usb 2-2: Product: Generic USB Hub [ 2.831068] usb 2-2: Manufacturer: ALCOR [ 2.833098] hub 2-2:1.0: USB hub found [ 3.108025] usb 3-1: new low-speed USB device number 2 using ohci_hcd [ 3.273061] usb 3-1: New USB device found, idVendor=1241, idProduct=1122 [ 3.273066] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.282359] input: HID 1241:1122 as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input2 [ 3.282472] generic-usb 0003:1241:1122.0003: input,hidraw2: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:13.1-1/input0 Now the system is resuming after `sudo pm-suspend`. [12498.968042] usb 2-2: reset full-speed USB device number 3 using ohci_hcd [12512.152050] usb 2-1: USB disconnect, device number 2 [12512.544068] usb 3-1: USB disconnect, device number 2 Could the above disconnect be the problem here? [12512.968046] usb 2-1: new low-speed USB device number 4 using ohci_hcd [12513.143894] usb 2-1: New USB device found, idVendor=046d, idProduct=c30f [12513.143901] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [12513.143905] usb 2-1: Product: Logitech USB Keyboard [12513.143908] usb 2-1: Manufacturer: Logitech [12513.157357] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input5 [12513.157747] generic-usb 0003:046D:C30F.0004: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input0 [12513.170016] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input6 [12513.170314] generic-usb 0003:046D:C30F.0005: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input1 The keyboard is detected twice, but not the mouse. [12710.284049] usb 3-2: new low-speed USB device number 3 using ohci_hcd [12710.449087] usb 3-2: New USB device found, idVendor=1241, idProduct=1122 [12710.449097] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [12710.458732] input: HID 1241:1122 as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input7 [12710.459106] generic-usb 0003:1241:1122.0006: input,hidraw2: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:13.1-2/input0 Replugging the mouse makes it work again. So the mouse is not recognized after the resume. Switching the USB port does not make any difference either. I used that mouse on an ASUS EeePC 701 4G with outdated Debian Sid/unstable and Linux 3.0.0 without problems. Another problem indicating the board ASUS M2A-VM [1] behaves strangely, is that the USB keyboard also randomly stops working. When I switched the USB ports today I even got something in the Linux kernel ring buffer. $ dmesg | grep EMI [ 2454.450355] hub 4-0:1.0: port 2 disabled by hub (EMI?), re-enabling... Although it is weird again, that this happened on the other port too but I only found this one message with `zgrep EMI /var/log/syslog*`. A post on LinuxQuestions.org suggests this is due to bad shielding of the USB cable. But I did not have these problems with the same keyboard on the ASUS EeePC 701 4G. Any hints on how to solve this issue are very much appreciated. Thanks, Paul [1] http://www.asus.com/Motherboards/AMD_AM2/M2AVM/ [2] http://www.linuxquestions.org/questions/linux-newbie-8/usb-port-nn-disabled-by-hub-emi-re-enabling-841593/ -- Package-specific info: ** Kernel log: USB boot messages pasted above ** Model information not available ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge [1002:7910] Subsystem: ASUSTeK Computer Inc. Device [1043:826d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdb00000-fdcfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:12.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at fc00 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f400 [size=8] Region 3: I/O ports at f000 [size=4] Region 4: I/O ports at ec00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.3 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.4 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at e400 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: ASUSTeK Computer Inc. Device [1043:8249] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge [1002:438d] Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdd00000-fddfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS690 [Radeon X1200 Series] [1002:791e] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:826d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M] Region 2: Memory at fdcf0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at cc00 [size=256] Region 5: Memory at fdb00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at dc00 [size=256] Region 2: Memory at fdaff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdf00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 046d:c30f Logitech, Inc. Logicool HID-Compliant Keyboard (106 key) Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub Bus 003 Device 003: ID 1241:1122 Belkin Typhoon Stream Optical Mouse USB+PS/2 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.2.0-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.43 ii initramfs-tools [linux-initramfs-tool] 0.103 ii kmod 8-2 ii linux-base 3.5 ii module-init-tools 8-2 Versions of packages linux-image-3.2.0-2-amd64 recommends: ii firmware-linux-free 3.1 ii libc6-i686 2.13-33 Versions of packages linux-image-3.2.0-2-amd64 suggests: ii grub-pc 1.99-22.1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-2-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.36 ii firmware-linux-nonfree 0.36 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64: linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true
Attachment:
signature.asc
Description: This is a digitally signed message part
