Re: [PATCH 5/5] usb: gadget/uvc: Add support for 'USB_GADGET_DELAYED_STATUS' response for a set_intf(alt-set 1) command

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bhupesh,

Thanks for the patch, and sorry for the late reply.

On Friday 01 June 2012 15:08:58 Bhupesh Sharma wrote:
> This patch adds the support in UVC webcam gadget design for providing
> USB_GADGET_DELAYED_STATUS in response to a set_interface(alt setting 1)
> command issue by the Host.
> 
> The current UVC webcam gadget design generates a STREAMON event
> corresponding to a set_interface(alt setting 1) command from the Host. This
> STREAMON event will eventually be routed to a real V4L2 device.
> 
> To start video streaming, it may be required to perform some register writes
> to a camera sensor device over slow external busses like I2C or SPI. So, it
> makes sense to ensure that we delay the STATUS stage of the
> set_interface(alt setting 1) command.
> 
> Otherwise, a lot of ISOC IN tokens sent by the Host will be replied to by
> zero-length packets by the webcam device. On certain Hosts this may even
> lead to ISOC URBs been cancelled from the Host side.
> 
> So, as soon as we finish doing all the "streaming" related stuff on the real
> V4L2 device, we call a STREAMON ioctl on the UVC side and from here we call
> the 'usb_composite_setup_continue' function to complete the status stage of
> the set_interface(alt setting 1) command.

That sounds good, thank you for coming up with a solution to this issue.

> Further, we need to ensure that we queue no video buffers on the UVC webcam
> gadget, until we de-queue a video buffer from the V4L2 device. Also, we need
> to enable UVC video related stuff at the first QBUF ioctl call itself, as
> the application will call the STREAMON on UVC side only when it has
> dequeued sufficient buffers from the V4L2 side and queued them to the UVC
> gadget. So, the UVC video enable stuff cannot be done in STREAMON ioctl
> call.

Is that really required ? First of all, the userspace application can queue 
buffers before it calls VIDIOC_STREAMON. Assuming it doesn't, the gadget 
driver calls uvc_video_enable() at streamon time, which then calls 
uvc_video_pump(). As no buffer is queued, the function will return without 
queuing any USB request, so we shouldn't have any problem.

> For the same we add two more UVC states:
> 	- PRE_STREAMING : not even a single buffer has been queued to UVC
> 	- BUF_QUEUED_STREAMING_OFF : one video buffer has been queued to UVC
> 			but we have not yet enabled STREAMING on UVC side.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxx>
> ---
>  drivers/usb/gadget/f_uvc.c    |   17 ++++++++++++-----
>  drivers/usb/gadget/uvc.h      |    3 +++
>  drivers/usb/gadget/uvc_v4l2.c |   38 ++++++++++++++++++++++++++++++++++++--
> 3 files changed, 51 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
> index 2a8bf06..3589ed0 100644
> --- a/drivers/usb/gadget/f_uvc.c
> +++ b/drivers/usb/gadget/f_uvc.c
> @@ -272,6 +272,13 @@ uvc_function_setup(struct usb_function *f, const struct
> usb_ctrlrequest *ctrl) return 0;
>  }
> 
> +void uvc_function_setup_continue(struct uvc_device *uvc)
> +{
> +	struct usb_composite_dev *cdev = uvc->func.config->cdev;
> +
> +	usb_composite_setup_continue(cdev);
> +}
> +
>  static int
>  uvc_function_get_alt(struct usb_function *f, unsigned interface)
>  {
> @@ -334,7 +341,8 @@ uvc_function_set_alt(struct usb_function *f, unsigned
> interface, unsigned alt) v4l2_event_queue(uvc->vdev, &v4l2_event);
> 
>  		uvc->state = UVC_STATE_CONNECTED;
> -		break;
> +
> +		return 0;
> 
>  	case 1:
>  		if (uvc->state != UVC_STATE_CONNECTED)
> @@ -352,14 +360,13 @@ uvc_function_set_alt(struct usb_function *f, unsigned
> interface, unsigned alt) v4l2_event.type = UVC_EVENT_STREAMON;
>  		v4l2_event_queue(uvc->vdev, &v4l2_event);
> 
> -		uvc->state = UVC_STATE_STREAMING;
> -		break;
> +		uvc->state = UVC_STATE_PRE_STREAMING;
> +
> +		return USB_GADGET_DELAYED_STATUS;
> 
>  	default:
>  		return -EINVAL;
>  	}
> -
> -	return 0;
>  }
> 
>  static void
> diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
> index d78ea25..6cd1435 100644
> --- a/drivers/usb/gadget/uvc.h
> +++ b/drivers/usb/gadget/uvc.h
> @@ -141,6 +141,8 @@ enum uvc_state
>  {
>  	UVC_STATE_DISCONNECTED,
>  	UVC_STATE_CONNECTED,
> +	UVC_STATE_PRE_STREAMING,
> +	UVC_STATE_BUF_QUEUED_STREAMING_OFF,
>  	UVC_STATE_STREAMING,
>  };
> 
> @@ -190,6 +192,7 @@ struct uvc_file_handle
>   * Functions
>   */
> 
> +extern void uvc_function_setup_continue(struct uvc_device *uvc);
>  extern void uvc_endpoint_stream(struct uvc_device *dev);
> 
>  extern void uvc_function_connect(struct uvc_device *uvc);
> diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
> index 9c2b45b..5f23571 100644
> --- a/drivers/usb/gadget/uvc_v4l2.c
> +++ b/drivers/usb/gadget/uvc_v4l2.c
> @@ -235,10 +235,36 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd,
> void *arg) }
> 
>  	case VIDIOC_QBUF:
> +		/*
> +		 * Theory of operation:
> +		 * - for the very first QBUF call the uvc state will be
> +		 *   UVC_STATE_PRE_STREAMING, so we need to initialize
> +		 *   the UVC video pipe (allocate requests, init queue,
> +		 *   ..) and change the uvc state to
> +		 *   UVC_STATE_BUF_QUEUED_STREAMING_OFF.
> +		 *
> +		 * - For the QBUF calls thereafter, (until STREAMON is
> +		 *   called) we just need to queue the buffers.
> +		 *
> +		 * - Once STREAMON has been called (which is handled by the
> +		 *   STREAMON case below), we need to start pumping the data
> +		 *   to USB side here itself.
> +		 */
>  		if ((ret = uvc_queue_buffer(&video->queue, arg)) < 0)
>  			return ret;
> 
> -		return uvc_video_pump(video);
> +		if (uvc->state == UVC_STATE_PRE_STREAMING) {
> +			ret = uvc_video_enable(video, 1);
> +			if (ret < 0)
> +				return ret;
> +
> +			uvc->state = UVC_STATE_BUF_QUEUED_STREAMING_OFF;
> +			return 0;
> +		} else if (uvc->state == UVC_STATE_STREAMING) {
> +			return uvc_video_pump(video);
> +		} else {
> +			return 0;
> +		}
> 
>  	case VIDIOC_DQBUF:
>  		return uvc_dequeue_buffer(&video->queue, arg,
> @@ -251,7 +277,15 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd,
> void *arg) if (*type != video->queue.queue.type)
>  			return -EINVAL;
> 
> -		return uvc_video_enable(video, 1);
> +		/*
> +		 * since the real video device has now started streaming
> +		 * its safe now to complete the status phase of the
> +		 * set_interface (alt setting 1)
> +		 */
> +		uvc_function_setup_continue(uvc);
> +		uvc->state = UVC_STATE_STREAMING;
> +
> +		return 0;
>  	}
> 
>  	case VIDIOC_STREAMOFF:
-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux