Hi Christoph,
On Mon, Jun 4, 2012 at 8:37 AM, Christoph Fritz
<chf.fritz@xxxxxxxxxxxxxx> wrote:
> After that, I stumbled upon this dmesg:
>
> Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)
> fsl-usb2-udc fsl-usb2-udc: clk_get("usb") failed
> fsl-usb2-udc: probe of fsl-usb2-udc failed with error -2
>
> Sascha, could you give me a hint?
Does the patch below fix your problem?
drivers/usb/gadget/fsl_mxc_udc.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index dcbc0a2..c3ade6b 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -36,21 +36,21 @@ int fsl_udc_clk_init(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
if (!cpu_is_mx35() && !cpu_is_mx25()) {
- mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+ mxc_ahb_clk = clk_get(&pdev->dev, "ipg");
if (IS_ERR(mxc_ahb_clk))
return PTR_ERR(mxc_ahb_clk);
- ret = clk_enable(mxc_ahb_clk);
+ ret = clk_prepare_enable(mxc_ahb_clk);
if (ret < 0) {
- dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+ dev_err(&pdev->dev, "clk_enable(\"ipg\") failed\n");
goto eenahb;
}
}
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
- mxc_usb_clk = clk_get(&pdev->dev, "usb");
+ mxc_usb_clk = clk_get(&pdev->dev, "per");
if (IS_ERR(mxc_usb_clk)) {
- dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
+ dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
ret = PTR_ERR(mxc_usb_clk);
goto egusb;
}
@@ -65,7 +65,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
}
}
- ret = clk_enable(mxc_usb_clk);
+ ret = clk_prepare_enable(mxc_usb_clk);
if (ret < 0) {
dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
goto eenusb;
@@ -79,7 +79,7 @@ eclkrate:
mxc_usb_clk = NULL;
egusb:
if (!cpu_is_mx35())
- clk_disable(mxc_ahb_clk);
+ clk_disable_unprepare(mxc_ahb_clk);
eenahb:
if (!cpu_is_mx35())
clk_put(mxc_ahb_clk);
@@ -104,7 +104,7 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
/* ULPI transceivers don't need usbpll */
if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
- clk_disable(mxc_usb_clk);
+ clk_disable_unprepare(mxc_usb_clk);
clk_put(mxc_usb_clk);
mxc_usb_clk = NULL;
}
@@ -113,11 +113,11 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
void fsl_udc_clk_release(void)
{
if (mxc_usb_clk) {
- clk_disable(mxc_usb_clk);
+ clk_disable_unprepare(mxc_usb_clk);
clk_put(mxc_usb_clk);
}
if (!cpu_is_mx35()) {
- clk_disable(mxc_ahb_clk);
+ clk_disable_unprepare(mxc_ahb_clk);
clk_put(mxc_ahb_clk);
}
}
--
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
