Hi Alan. I will send patch v2 after chaing code. Thanks for your review. 2012/6/7, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>: > On Wed, 6 Jun 2012, Namjae Jeon wrote: > >> Make use of USB quirk method to identify such HDD while reading the cache >> status in sd_probe(). If cache quirk is present for the HDD, lets assume >> that cache is enabled and make WCE bit equal to 1. > > Your lines should be wrapped after 72 columns or so. > > Calling this a "quirk" sounds strange. Really, your new flag indicates > that WCE should default to "on" instead of "off". How about calling it > "wce_default_on" instead of "wce_quirk"? > >> --- a/include/scsi/scsi_device.h >> +++ b/include/scsi/scsi_device.h >> @@ -152,6 +152,7 @@ struct scsi_device { >> unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */ >> unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */ >> unsigned is_visible:1; /* is the device visible in sysfs */ >> + unsigned wce_quirk:1; /* cache read page is not available */ > > The comment is wrong. There's no need for a quirk to indicate the > cache page is unavailable; the driver already knows when the page is > unavailable. Rather, the quirk indicates that WCE should default to > "on". > > Alan Stern > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html