Hi,
On Fri, May 25, 2012 at 10:17:47AM +0800, Yu Xu wrote:
> It supports Marvell USB 3.0 device controller for PXA2128 chip.
>
> Signed-off-by: Yu Xu <yuxu@xxxxxxxxxxx>
> ---
> drivers/usb/gadget/Kconfig | 9 +
> drivers/usb/gadget/Makefile | 1 +
> drivers/usb/gadget/mv_u3d.h | 320 ++++++
> drivers/usb/gadget/mv_u3d_core.c | 2074 ++++++++++++++++++++++++++++++++++++++
> 4 files changed, 2404 insertions(+)
> create mode 100644 drivers/usb/gadget/mv_u3d.h
> create mode 100644 drivers/usb/gadget/mv_u3d_core.c
>
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index 1f93861..4eb92d0 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -316,6 +316,15 @@ config USB_MV_UDC
> USB2.0 OTG controller, which can be configured as high speed or
> full speed USB peripheral.
>
> +config USB_MV_U3D
> + tristate "MARVELL PXA2128 USB 3.0 controller"
> + depends on CPU_MMP3
> + select USB_GADGET_DUALSPEED
> + select USB_GADGET_SUPERSPEED
> + help
> + MARVELL PXA2128 Processor series include a super speed USB3.0 device
> + controller, which support super speed USB peripheral.
> +
> #
> # Controllers available in both integrated and discrete versions
> #
> diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
> index b7f6eef..3e7cdd7 100644
> --- a/drivers/usb/gadget/Makefile
> +++ b/drivers/usb/gadget/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
> mv_udc-y := mv_udc_core.o
> obj-$(CONFIG_USB_CI13XXX_MSM) += ci13xxx_msm.o
> obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
> +obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
>
> #
> # USB gadget drivers
> diff --git a/drivers/usb/gadget/mv_u3d.h b/drivers/usb/gadget/mv_u3d.h
> new file mode 100644
> index 0000000..e32a787
> --- /dev/null
> +++ b/drivers/usb/gadget/mv_u3d.h
> @@ -0,0 +1,320 @@
> +/*
> + * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + */
> +
> +#ifndef __MV_U3D_H
> +#define __MV_U3D_H
> +
> +#define MV_U3D_EP_CONTEXT_ALIGNMENT 32
> +#define MV_U3D_TRB_ALIGNMENT 16
> +#define MV_U3D_DMA_BOUNDARY 4096
> +#define MV_U3D_EP0_MAX_PKT_SIZE 512
> +
> +/* ep0 transfer state */
> +#define MV_U3D_WAIT_FOR_SETUP 0
> +#define MV_U3D_DATA_STATE_XMIT 1
> +#define MV_U3D_DATA_STATE_NEED_ZLP 2
> +#define MV_U3D_WAIT_FOR_OUT_STATUS 3
> +#define MV_U3D_DATA_STATE_RECV 4
> +#define MV_U3D_STATUS_STAGE 5
> +
> +#define MV_U3D_EP_MAX_LENGTH_TRANSFER 0x10000
> +
> +/* USB3 Interrupt Status */
> +#define MV_U3D_USBINT_SETUP 0x00000001
> +#define MV_U3D_USBINT_RX_COMPLETE 0x00000002
> +#define MV_U3D_USBINT_TX_COMPLETE 0x00000004
> +#define MV_U3D_USBINT_UNDER_RUN 0x00000008
> +#define MV_U3D_USBINT_RXDESC_ERR 0x00000010
> +#define MV_U3D_USBINT_TXDESC_ERR 0x00000020
> +#define MV_U3D_USBINT_RX_TRB_COMPLETE 0x00000040
> +#define MV_U3D_USBINT_TX_TRB_COMPLETE 0x00000080
> +#define MV_U3D_USBINT_VBUS_VALID 0x00010000
> +#define MV_U3D_USBINT_STORAGE_CMD_FULL 0x00020000
> +#define MV_U3D_USBINT_LINK_CHG 0x01000000
> +
> +/* USB3 Interrupt Enable */
> +#define MV_U3D_INTR_ENABLE_SETUP 0x00000001
> +#define MV_U3D_INTR_ENABLE_RX_COMPLETE 0x00000002
> +#define MV_U3D_INTR_ENABLE_TX_COMPLETE 0x00000004
> +#define MV_U3D_INTR_ENABLE_UNDER_RUN 0x00000008
> +#define MV_U3D_INTR_ENABLE_RXDESC_ERR 0x00000010
> +#define MV_U3D_INTR_ENABLE_TXDESC_ERR 0x00000020
> +#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE 0x00000040
> +#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE 0x00000080
> +#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR 0x00000100
> +#define MV_U3D_INTR_ENABLE_VBUS_VALID 0x00010000
> +#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL 0x00020000
> +#define MV_U3D_INTR_ENABLE_LINK_CHG 0x01000000
> +#define MV_U3D_INTR_ENABLE_PRIME_STATUS 0x02000000
> +
> +/* USB3 Link Change */
> +#define MV_U3D_LINK_CHANGE_LINK_UP 0x00000001
> +#define MV_U3D_LINK_CHANGE_SUSPEND 0x00000002
> +#define MV_U3D_LINK_CHANGE_RESUME 0x00000004
> +#define MV_U3D_LINK_CHANGE_WRESET 0x00000008
> +#define MV_U3D_LINK_CHANGE_HRESET 0x00000010
> +#define MV_U3D_LINK_CHANGE_VBUS_INVALID 0x00000020
> +#define MV_U3D_LINK_CHANGE_INACT 0x00000040
> +#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0 0x00000080
> +#define MV_U3D_LINK_CHANGE_U1 0x00000100
> +#define MV_U3D_LINK_CHANGE_U2 0x00000200
> +#define MV_U3D_LINK_CHANGE_U3 0x00000400
> +
> +/* bridge setting */
> +#define MV_U3D_BRIDGE_SETTING_VBUS_VALID (1 << 16)
> +
> +/* Command Register Bit Masks */
> +#define MV_U3D_CMD_RUN_STOP 0x00000001
> +#define MV_U3D_CMD_CTRL_RESET 0x00000002
> +
> +/* ep control register */
> +#define MV_U3D_EPXCR_EP_TYPE_CONTROL 0
> +#define MV_U3D_EPXCR_EP_TYPE_ISOC 1
> +#define MV_U3D_EPXCR_EP_TYPE_BULK 2
> +#define MV_U3D_EPXCR_EP_TYPE_INT 3
> +#define MV_U3D_EPXCR_EP_ENABLE_SHIFT 4
> +#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT 12
> +#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT 16
> +#define MV_U3D_USB_BULK_BURST_OUT 6
> +#define MV_U3D_USB_BULK_BURST_IN 14
> +
> +#define MV_U3D_EPXCR_EP_FLUSH (1 << 7)
> +#define MV_U3D_EPXCR_EP_HALT (1 << 1)
> +#define MV_U3D_EPXCR_EP_INIT (1)
> +
> +/* TX/RX Status Register */
> +#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT 24
> +#define MV_U3D_COMPLETE_INVALID 0
> +#define MV_U3D_COMPLETE_SUCCESS 1
> +#define MV_U3D_COMPLETE_BUFF_ERR 2
> +#define MV_U3D_COMPLETE_SHORT_PACKET 3
> +#define MV_U3D_COMPLETE_TRB_ERR 5
> +#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK (0xFFFFFF)
> +
> +#define MV_U3D_USB_LINK_BYPASS_VBUS 0x8
> +
> +#define MV_U3D_LTSSM_PHY_INIT_DONE 0x80000000
> +#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE 0x40000000
> +
> +#define MV_U3D_USB3_OP_REGS_OFFSET 0x100
> +#define MV_U3D_USB3_PHY_OFFSET 0xB800
> +
> +#define DCS_ENABLE 0x1
> +
> +/* timeout */
> +#define MV_U3D_RESET_TIMEOUT 10000
> +#define MV_U3D_FLUSH_TIMEOUT 100000
> +#define MV_U3D_OWN_TIMEOUT 10000
> +#define LOOPS_USEC_SHIFT 4
> +#define LOOPS_USEC (1 << LOOPS_USEC_SHIFT)
> +#define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT)
> +
> +/* ep direction */
> +#define MV_U3D_EP_DIR_IN 1
> +#define MV_U3D_EP_DIR_OUT 0
> +#define mv_u3d_ep_dir(ep) (((ep)->ep_num == 0) ? \
> + ((ep)->u3d->ep0_dir) : ((ep)->direction))
> +
> +/* usb capability registers */
> +struct mv_u3d_cap_regs {
> + u32 rsvd[5];
> + u32 dboff; /* doorbell register offset */
> + u32 rtsoff; /* runtime register offset */
> + u32 vuoff; /* vendor unique register offset */
> +};
> +
> +/* operation registers */
> +struct mv_u3d_op_regs {
> + u32 usbcmd; /* Command register */
> + u32 rsvd1[11];
> + u32 dcbaapl; /* Device Context Base Address low register */
> + u32 dcbaaph; /* Device Context Base Address high register */
> + u32 rsvd2[243];
> + u32 portsc; /* port status and control register*/
> + u32 portlinkinfo; /* port link info register*/
> + u32 rsvd3[9917];
> + u32 doorbell; /* doorbell register */
> +};
> +
> +/* control enpoint enable registers */
> +struct epxcr {
> + u32 epxoutcr0; /* ep out control 0 register */
> + u32 epxoutcr1; /* ep out control 1 register */
> + u32 epxincr0; /* ep in control 0 register */
> + u32 epxincr1; /* ep in control 1 register */
> +};
> +
> +/* transfer status registers */
> +struct xferstatus {
> + u32 curdeqlo; /* current TRB pointer low */
> + u32 curdeqhi; /* current TRB pointer high */
> + u32 statuslo; /* transfer status low */
> + u32 statushi; /* transfer status high */
> +};
> +
> +/* vendor unique control registers */
> +struct mv_u3d_vuc_regs {
> + u32 ctrlepenable; /* control endpoint enable register */
> + u32 setuplock; /* setup lock register */
> + u32 endcomplete; /* endpoint transfer complete register */
> + u32 intrcause; /* interrupt cause register */
> + u32 intrenable; /* interrupt enable register */
> + u32 trbcomplete; /* TRB complete register */
> + u32 linkchange; /* link change register */
> + u32 rsvd1[5];
> + u32 trbunderrun; /* TRB underrun register */
> + u32 rsvd2[43];
> + u32 bridgesetting; /* bridge setting register */
> + u32 rsvd3[7];
> + struct xferstatus txst[16]; /* TX status register */
> + struct xferstatus rxst[16]; /* RX status register */
> + u32 ltssm; /* LTSSM control register */
> + u32 pipe; /* PIPE control register */
> + u32 linkcr0; /* link control 0 register */
> + u32 linkcr1; /* link control 1 register */
> + u32 rsvd6[60];
> + u32 mib0; /* MIB0 counter register */
> + u32 usblink; /* usb link control register */
> + u32 ltssmstate; /* LTSSM state register */
> + u32 linkerrorcause; /* link error cause register */
> + u32 rsvd7[60];
> + u32 devaddrtiebrkr; /* device address and tie breaker */
> + u32 itpinfo0; /* ITP info 0 register */
> + u32 itpinfo1; /* ITP info 1 register */
> + u32 rsvd8[61];
> + struct epxcr epcr[16]; /* ep control register */
> + u32 rsvd9[64];
> + u32 phyaddr; /* PHY address register */
> + u32 phydata; /* PHY data register */
> +};
> +
> +/* Endpoint context structure */
> +struct mv_u3d_ep_context {
> + u32 rsvd0;
> + u32 rsvd1;
> + u32 trb_addr_lo; /* TRB address low 32 bit */
> + u32 trb_addr_hi; /* TRB address high 32 bit */
> + u32 rsvd2;
> + u32 rsvd3;
> + struct usb_ctrlrequest setup_buffer; /* setup data buffer */
> +};
> +
> +/* TRB control data structure */
> +struct mv_u3d_trb_ctrl {
> + u32 own:1; /* owner of TRB */
> + u32 rsvd1:3;
> + u32 chain:1; /* associate this TRB with the
> + next TRB on the Ring */
> + u32 ioc:1; /* interrupt on complete */
> + u32 rsvd2:4;
> + u32 type:6; /* TRB type */
> +#define TYPE_NORMAL 1
> +#define TYPE_DATA 3
> +#define TYPE_LINK 6
> + u32 dir:1; /* Working at data stage of control endpoint
> + operation. 0 is OUT and 1 is IN. */
> + u32 rsvd3:15;
> +};
> +
> +/* TRB data structure
> + * For multiple TRB, all the TRBs' physical address should be continuous.
> + */
> +struct mv_u3d_trb_hw {
> + u32 buf_addr_lo; /* data buffer address low 32 bit */
> + u32 buf_addr_hi; /* data buffer address high 32 bit */
> + u32 trb_len; /* transfer length */
> + struct mv_u3d_trb_ctrl ctrl; /* TRB control data */
> +};
> +
> +/* TRB structure */
> +struct mv_u3d_trb {
> + struct mv_u3d_trb_hw *trb_hw; /* point to the trb_hw structure */
> + dma_addr_t trb_dma; /* dma address for this trb_hw */
> + struct list_head trb_list; /* trb list */
> +};
> +
> +/* device data structure */
> +struct mv_u3d {
> + struct usb_gadget gadget;
> + struct usb_gadget_driver *driver;
> + spinlock_t lock; /* device lock */
> + struct completion *done;
> + struct device *dev;
> + int irq;
> +
> + /* usb controller registers */
> + struct mv_u3d_cap_regs __iomem *cap_regs;
> + struct mv_u3d_op_regs __iomem *op_regs;
> + struct mv_u3d_vuc_regs __iomem *vuc_regs;
> + void __iomem *phy_regs;
> +
> + unsigned int max_eps;
> + struct mv_u3d_ep_context *ep_context;
> + size_t ep_context_size;
> + dma_addr_t ep_context_dma;
> +
> + struct dma_pool *trb_pool; /* for TRB data structure */
> + struct mv_u3d_ep *eps;
> +
> + struct mv_u3d_req *status_req; /* ep0 status request */
> + struct usb_ctrlrequest local_setup_buff; /* store setup data*/
> +
> + unsigned int resume_state; /* USB state to resume */
> + unsigned int usb_state; /* USB current state */
> + unsigned int ep0_state; /* Endpoint zero state */
> + unsigned int ep0_dir;
> +
> + unsigned int dev_addr; /* device address */
> +
> + unsigned int errors;
> +
> + unsigned softconnect:1;
> + unsigned vbus_active:1; /* vbus is active or not */
> + unsigned remote_wakeup:1; /* support remote wakeup */
> + unsigned clock_gating:1; /* clock gating or not */
> + unsigned active:1; /* udc is active or not */
> + unsigned vbus_valid_detect:1; /* udc vbus detection */
> +
> + struct mv_usb_addon_irq *vbus;
> + unsigned int power;
> +
> + struct clk *clk;
> +};
> +
> +/* endpoint data structure */
> +struct mv_u3d_ep {
> + struct usb_ep ep;
> + struct mv_u3d *u3d;
> + struct list_head queue; /* ep request queued hardware */
> + struct list_head req_list; /* list of ep request */
> + struct mv_u3d_ep_context *ep_context; /* ep context */
> + u32 direction;
> + char name[14];
> + u32 processing; /* there is ep request
> + queued on haredware */
> + spinlock_t req_lock; /* ep lock */
> + unsigned wedge:1;
> + unsigned enabled:1;
> + unsigned ep_type:2;
> + unsigned ep_num:8;
> +};
> +
> +/* request data structure */
> +struct mv_u3d_req {
> + struct usb_request req;
> + struct mv_u3d_ep *ep;
> + struct list_head queue; /* ep requst queued on hardware */
> + struct list_head list; /* ep request list */
> + struct list_head trb_list; /* trb list of a request */
> +
> + struct mv_u3d_trb *trb_head; /* point to first trb of a request */
> + unsigned trb_count; /* TRB number in the chain */
> + unsigned chain; /* TRB chain or not */
> +};
> +
> +#endif
> diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
> new file mode 100644
> index 0000000..ffccba5
> --- /dev/null
> +++ b/drivers/usb/gadget/mv_u3d_core.c
> @@ -0,0 +1,2074 @@
> +/*
> + * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmapool.h>
> +#include <linux/kernel.h>
> +#include <linux/delay.h>
> +#include <linux/ioport.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/timer.h>
> +#include <linux/list.h>
> +#include <linux/notifier.h>
> +#include <linux/interrupt.h>
> +#include <linux/moduleparam.h>
> +#include <linux/device.h>
> +#include <linux/usb/ch9.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/pm.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/mv_usb.h>
> +#include <linux/clk.h>
> +#include <asm/system.h>
> +#include <asm/unaligned.h>
> +#include <asm/byteorder.h>
> +
> +#include "mv_u3d.h"
> +
> +#define DRIVER_DESC "Marvell PXA USB3.0 Device Controller driver"
> +
> +static const char driver_name[] = "mv_u3d";
> +static const char driver_desc[] = DRIVER_DESC;
> +
> +static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status);
> +static void mv_u3d_stop_activity(struct mv_u3d *u3d,
> + struct usb_gadget_driver *driver);
> +
> +/* for endpoint 0 operations */
> +static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = {
> + .bLength = USB_DT_ENDPOINT_SIZE,
> + .bDescriptorType = USB_DT_ENDPOINT,
> + .bEndpointAddress = 0,
> + .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
> + .wMaxPacketSize = MV_U3D_EP0_MAX_PKT_SIZE,
> +};
> +
> +static void mv_u3d_ep0_reset(struct mv_u3d *u3d)
> +{
> + struct mv_u3d_ep *ep;
> + u32 epxcr;
> + int i;
> +
> + for (i = 0; i < 2; i++) {
> + ep = &u3d->eps[i];
> + ep->u3d = u3d;
> +
> + /* ep0 ep context, ep0 in and out share the same ep context */
> + ep->ep_context = &u3d->ep_context[1];
> + }
> +
> + /* reset ep state machine */
> + /* reset ep0 out */
> + epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
> + epxcr |= MV_U3D_EPXCR_EP_INIT;
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
> + udelay(5);
> + epxcr &= ~MV_U3D_EPXCR_EP_INIT;
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
> +
> + epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
> + << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
> + | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
> + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
> + | MV_U3D_EPXCR_EP_TYPE_CONTROL);
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1);
> +
> + /* reset ep0 in */
> + epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
> + epxcr |= MV_U3D_EPXCR_EP_INIT;
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
> + udelay(5);
> + epxcr &= ~MV_U3D_EPXCR_EP_INIT;
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
> +
> + epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
> + << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
> + | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
> + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
> + | MV_U3D_EPXCR_EP_TYPE_CONTROL);
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1);
> +}
> +
> +static void mv_u3d_ep0_stall(struct mv_u3d *u3d)
> +{
> + u32 tmp;
> + dev_dbg(u3d->dev, "%s\n", __func__);
> +
> + /* set TX and RX to stall */
> + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
> + tmp |= MV_U3D_EPXCR_EP_HALT;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
> +
> + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
> + tmp |= MV_U3D_EPXCR_EP_HALT;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
> +
> + /* update ep0 state */
> + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
> + u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
> +}
> +
> +static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
> + struct mv_u3d_req *curr_req)
> +{
> + struct mv_u3d_trb *curr_trb;
> + dma_addr_t cur_deq_lo;
> + struct mv_u3d_ep_context *curr_ep_context;
> + int trb_complete, actual, remaining_length;
> + int direction, ep_num;
> + int retval = 0;
> + u32 tmp, status, length;
> +
> + curr_ep_context = &u3d->ep_context[index];
> + direction = index % 2;
> + ep_num = index / 2;
> +
> + trb_complete = 0;
> + actual = curr_req->req.length;
> +
> + while (!list_empty(&curr_req->trb_list)) {
> + curr_trb = list_entry(curr_req->trb_list.next,
> + struct mv_u3d_trb, trb_list);
> + if (!curr_trb->trb_hw->ctrl.own) {
> + dev_err(u3d->dev, "%s, TRB own error!\n",
> + u3d->eps[index].name);
> + return 1;
> + }
> +
> + curr_trb->trb_hw->ctrl.own = 0;
> + if (direction == MV_U3D_EP_DIR_OUT) {
> + tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
> + cur_deq_lo =
> + ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo);
> + } else {
> + tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
> + cur_deq_lo =
> + ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo);
> + }
> +
> + status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
> + length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
> +
> + if (status == MV_U3D_COMPLETE_SUCCESS ||
> + (status == MV_U3D_COMPLETE_SHORT_PACKET &&
> + direction == MV_U3D_EP_DIR_OUT)) {
> + remaining_length += length;
> + actual -= remaining_length;
> + } else {
> + dev_err(u3d->dev,
> + "complete_tr error: ep=%d %s: error = 0x%x\n",
> + index >> 1, direction ? "SEND" : "RECV",
> + status);
> + retval = -EPROTO;
> + }
> +
> + list_del_init(&curr_trb->trb_list);
> + }
> + if (retval)
> + return retval;
> +
> + curr_req->req.actual = actual;
> + return 0;
> +}
> +
> +/*
> + * mv_u3d_done() - retire a request; caller blocked irqs
> + * @status : request status to be set, only works when
> + * request is still in progress.
> + */
> +static
> +void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
> +{
> + struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d;
> +
> + dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n");
> + /* Removed the req from ep queue */
> + list_del_init(&req->queue);
> +
> + /* req.status should be set as -EINPROGRESS in ep_queue() */
> + if (req->req.status == -EINPROGRESS)
> + req->req.status = status;
> + else
> + status = req->req.status;
> +
> + /* Free trb for the request */
> + if (!req->chain)
> + dma_pool_free(u3d->trb_pool,
> + req->trb_head->trb_hw, req->trb_head->trb_dma);
> + else {
> + dma_unmap_single(ep->u3d->gadget.dev.parent,
> + (dma_addr_t)req->trb_head->trb_dma,
> + req->trb_count * sizeof(struct mv_u3d_trb_hw),
> + DMA_BIDIRECTIONAL);
> + kfree(req->trb_head->trb_hw);
> + }
> + kfree(req->trb_head);
> +
> + usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep));
> +
> + if (status && (status != -ESHUTDOWN)) {
> + dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u",
> + ep->ep.name, &req->req, status,
> + req->req.actual, req->req.length);
> + }
> +
> + spin_unlock(&ep->u3d->lock);
> + /*
> + * complete() is from gadget layer,
> + * eg fsg->bulk_in_complete()
> + */
> + if (req->req.complete)
> + req->req.complete(&ep->ep, &req->req);
> +
> + spin_lock(&ep->u3d->lock);
> +}
> +
> +static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req)
> +{
> + u32 tmp, direction;
> + struct mv_u3d *u3d;
> + struct mv_u3d_ep_context *ep_context;
> + int retval = 0;
> +
> + u3d = ep->u3d;
> + direction = mv_u3d_ep_dir(ep);
> +
> + /* ep0 in and out share the same ep context slot 1*/
> + if (ep->ep_num == 0)
> + ep_context = &(u3d->ep_context[1]);
> + else
> + ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]);
> +
> + /* check if the pipe is empty or not */
> + if (!list_empty(&ep->queue)) {
> + dev_err(u3d->dev, "add trb to non-empty queue!\n");
> + retval = -ENOMEM;
> + WARN_ON(1);
> + } else {
> + ep_context->rsvd0 = cpu_to_le32(1);
> + ep_context->rsvd1 = 0;
> +
> + /* Configure the trb address and set the DCS bit.
> + * Both DCS bit and own bit in trb should be set.
> + */
> + ep_context->trb_addr_lo =
> + cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE);
> + ep_context->trb_addr_hi = 0;
> +
> + /* Ensure that updates to the EP Context will
> + * occure before Ring Bell.
> + */
> + wmb();
> +
> + /* ring bell the ep */
> + if (ep->ep_num == 0)
> + tmp = 0x1;
> + else
> + tmp = ep->ep_num * 2
> + + ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1);
> +
> + iowrite32(tmp, &u3d->op_regs->doorbell);
> + }
> + return retval;
> +}
> +
> +static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req,
> + unsigned *length, dma_addr_t *dma)
> +{
> + u32 temp;
> + unsigned int direction;
> + struct mv_u3d_trb *trb;
> + struct mv_u3d_trb_hw *trb_hw;
> + struct mv_u3d *u3d;
> +
> + /* how big will this transfer be? */
> + *length = req->req.length - req->req.actual;
> + BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
> +
> + u3d = req->ep->u3d;
> +
> + trb = kzalloc(sizeof(*trb), GFP_ATOMIC);
> + if (!trb) {
> + dev_err(u3d->dev, "%s, trb alloc fail\n", __func__);
> + return NULL;
> + }
> +
> + /*
> + * Be careful that no _GFP_HIGHMEM is set,
> + * or we can not use dma_to_virt
> + * cannot use GFP_KERNEL in spin lock
> + */
> + trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
> + if (!trb_hw) {
> + dev_err(u3d->dev,
> + "%s, dma_pool_alloc fail\n", __func__);
> + return NULL;
> + }
> + trb->trb_dma = *dma;
> + trb->trb_hw = trb_hw;
> +
> + /* initialize buffer page pointers */
> + temp = (u32)(req->req.dma + req->req.actual);
> +
> + trb_hw->buf_addr_lo = cpu_to_le32(temp);
> + trb_hw->buf_addr_hi = 0;
> + trb_hw->trb_len = cpu_to_le32(*length);
> + trb_hw->ctrl.own = 1;
> +
> + if (req->ep->ep_num == 0)
> + trb_hw->ctrl.type = TYPE_DATA;
> + else
> + trb_hw->ctrl.type = TYPE_NORMAL;
> +
> + req->req.actual += *length;
> +
> + direction = mv_u3d_ep_dir(req->ep);
> + if (direction == MV_U3D_EP_DIR_IN)
> + trb_hw->ctrl.dir = 1;
> + else
> + trb_hw->ctrl.dir = 0;
> +
> + /* Enable interrupt for the last trb of a request */
> + if (!req->req.no_interrupt)
> + trb_hw->ctrl.ioc = 1;
> +
> + trb_hw->ctrl.chain = 0;
> +
> + wmb();
> + return trb;
> +}
> +
> +static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length,
> + struct mv_u3d_trb *trb, int *is_last)
> +{
> + u32 temp;
> + unsigned int direction;
> + struct mv_u3d *u3d;
> +
> + /* how big will this transfer be? */
> + *length = min(req->req.length - req->req.actual,
> + (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
> +
> + u3d = req->ep->u3d;
> +
> + trb->trb_dma = 0;
> +
> + /* initialize buffer page pointers */
> + temp = (u32)(req->req.dma + req->req.actual);
> +
> + trb->trb_hw->buf_addr_lo = cpu_to_le32(temp);
> + trb->trb_hw->buf_addr_hi = 0;
> + trb->trb_hw->trb_len = cpu_to_le32(*length);
> + trb->trb_hw->ctrl.own = 1;
> +
> + if (req->ep->ep_num == 0)
> + trb->trb_hw->ctrl.type = TYPE_DATA;
> + else
> + trb->trb_hw->ctrl.type = TYPE_NORMAL;
> +
> + req->req.actual += *length;
> +
> + direction = mv_u3d_ep_dir(req->ep);
> + if (direction == MV_U3D_EP_DIR_IN)
> + trb->trb_hw->ctrl.dir = 1;
> + else
> + trb->trb_hw->ctrl.dir = 0;
> +
> + /* zlp is needed if req->req.zero is set */
> + if (req->req.zero) {
> + if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
> + *is_last = 1;
> + else
> + *is_last = 0;
> + } else if (req->req.length == req->req.actual)
> + *is_last = 1;
> + else
> + *is_last = 0;
> +
> + /* Enable interrupt for the last trb of a request */
> + if (*is_last && !req->req.no_interrupt)
> + trb->trb_hw->ctrl.ioc = 1;
> +
> + if (*is_last)
> + trb->trb_hw->ctrl.chain = 0;
> + else {
> + trb->trb_hw->ctrl.chain = 1;
> + dev_dbg(u3d->dev, "chain trb\n");
> + }
> +
> + wmb();
> +
> + return 0;
> +}
> +
> +/* generate TRB linked list for a request
> + * usb controller only supports continous trb chain,
> + * that trb structure physical address should be continous.
> + */
> +static int mv_u3d_req_to_trb(struct mv_u3d_req *req)
> +{
> + unsigned count;
> + int is_last;
> + struct mv_u3d_trb *trb;
> + struct mv_u3d_trb_hw *trb_hw;
> + struct mv_u3d *u3d;
> + dma_addr_t dma;
> + unsigned length;
> + unsigned trb_num;
> +
> + u3d = req->ep->u3d;
> +
> + INIT_LIST_HEAD(&req->trb_list);
> +
> + length = req->req.length - req->req.actual;
> + /* normally the request transfer length is less than 16KB.
> + * we use buil_trb_one() to optimize it.
> + */
> + if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) {
> + trb = mv_u3d_build_trb_one(req, &count, &dma);
> + list_add_tail(&trb->trb_list, &req->trb_list);
> + req->trb_head = trb;
> + req->trb_count = 1;
> + req->chain = 0;
> + } else {
> + trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER;
> + if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER)
> + trb_num++;
> +
> + trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC);
> + if (!trb) {
> + dev_err(u3d->dev,
> + "%s, trb alloc fail\n", __func__);
> + return -ENOMEM;
> + }
> +
> + trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
> + if (!trb_hw) {
> + dev_err(u3d->dev,
> + "%s, trb_hw alloc fail\n", __func__);
> + return -ENOMEM;
> + }
> +
> + do {
> + trb->trb_hw = trb_hw;
> + if (mv_u3d_build_trb_chain(req, &count,
> + trb, &is_last)) {
> + dev_err(u3d->dev,
> + "%s, mv_u3d_build_trb_chain fail\n",
> + __func__);
> + return -EIO;
> + }
> +
> + list_add_tail(&trb->trb_list, &req->trb_list);
> + req->trb_count++;
> + trb++;
> + trb_hw++;
> + } while (!is_last);
> +
> + req->trb_head = list_entry(req->trb_list.next,
> + struct mv_u3d_trb, trb_list);
> + req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent,
> + req->trb_head->trb_hw,
> + trb_num * sizeof(*trb_hw),
> + DMA_BIDIRECTIONAL);
> +
> + req->chain = 1;
> + }
> +
> + return 0;
> +}
> +
> +static int
> +mv_u3d_start_queue(struct mv_u3d_ep *ep)
> +{
> + struct mv_u3d *u3d = ep->u3d;
> + struct mv_u3d_req *req;
> + int ret;
> +
> + if (!list_empty(&ep->req_list) && !ep->processing)
> + req = list_entry(ep->req_list.next, struct mv_u3d_req, list);
> + else
> + return 0;
> +
> + ep->processing = 1;
> +
> + /* set up dma mapping */
> + ret = usb_gadget_map_request(&u3d->gadget, &req->req,
> + mv_u3d_ep_dir(ep));
> + if (ret)
> + return ret;
> +
> + req->req.status = -EINPROGRESS;
> + req->req.actual = 0;
> + req->trb_count = 0;
> +
> + /* build trbs and push them to device queue */
> + if (!mv_u3d_req_to_trb(req)) {
> + ret = mv_u3d_queue_trb(ep, req);
> + if (ret) {
> + ep->processing = 0;
> + return ret;
> + }
> + } else {
> + ep->processing = 0;
> + dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__);
> + return -ENOMEM;
> + }
> +
> + /* irq handler advances the queue */
> + if (req)
> + list_add_tail(&req->queue, &ep->queue);
> +
> + return 0;
> +}
> +
> +static int mv_u3d_ep_enable(struct usb_ep *_ep,
> + const struct usb_endpoint_descriptor *desc)
> +{
> + struct mv_u3d *u3d;
> + struct mv_u3d_ep *ep;
> + struct mv_u3d_ep_context *ep_context;
> + u16 max = 0;
> + unsigned maxburst = 0;
> + u32 epxcr, direction;
> +
> + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT)
> + return -EINVAL;
> +
> + ep = container_of(_ep, struct mv_u3d_ep, ep);
> + u3d = ep->u3d;
> +
> + if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN)
> + return -ESHUTDOWN;
> +
> + direction = mv_u3d_ep_dir(ep);
> + max = le16_to_cpu(desc->wMaxPacketSize);
> +
> + if (!_ep->maxburst)
> + _ep->maxburst = 1;
> + maxburst = _ep->maxburst;
> +
> + /* Get the endpoint context address */
> + ep_context = (struct mv_u3d_ep_context *)ep->ep_context;
> +
> + /* Set the max burst size */
> + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
> + case USB_ENDPOINT_XFER_BULK:
> + if (maxburst > 16) {
> + dev_err(u3d->dev,
> + "max burst should not be greater "
> + "than 1 on bulk ep\n");
this comment doesn't match the check.
> + _ep->maxburst = maxburst = 1;
we generally avoid multiple assignments in one line. We also avoid magic
constants. Why is this always 1 and why do you overwrite ep->maxburst ?
> + }
> + dev_dbg(u3d->dev,
> + "maxburst: %d on bulk %s\n", maxburst, ep->name);
> + break;
> + case USB_ENDPOINT_XFER_CONTROL:
> + if (maxburst != 1) {
> + dev_err(u3d->dev,
> + "max burst should be 1 on control ep\n");
> + _ep->maxburst = maxburst = 1;
if any gadget driver puts MaxBurst to anything other than zero, you
should have a big giant warning about it...
> + }
> + case USB_ENDPOINT_XFER_INT:
> + if (maxburst != 1) {
> + dev_err(u3d->dev,
> + "max burst should be 1 on int ep "
> + "if transfer size is not 1024\n");
> + _ep->maxburst = maxburst = 1;
> + }
> + break;
> + case USB_ENDPOINT_XFER_ISOC:
> + if (maxburst != 1) {
> + dev_err(u3d->dev,
> + "max burst should be 1 on isoc ep "
> + "if transfer size is not 1024\n");
> + _ep->maxburst = maxburst = 1;
> + }
> + break;
> + default:
> + goto en_done;
> + }
> +
> + ep->ep.maxpacket = max;
> + ep->ep.desc = desc;
> + ep->enabled = 1;
> +
> + /* Enable the endpoint for Rx or Tx and set the endpoint type */
> + if (direction == MV_U3D_EP_DIR_OUT) {
> + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
> + epxcr |= MV_U3D_EPXCR_EP_INIT;
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
> + udelay(5);
> + epxcr &= ~MV_U3D_EPXCR_EP_INIT;
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
> +
> + epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
> + | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
> + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
> + | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
> + } else {
> + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
> + epxcr |= MV_U3D_EPXCR_EP_INIT;
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
> + udelay(5);
> + epxcr &= ~MV_U3D_EPXCR_EP_INIT;
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
> +
> + epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
> + | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
> + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
> + | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
> + }
> +
> + return 0;
> +en_done:
> + return -EINVAL;
> +}
> +
> +static int mv_u3d_ep_disable(struct usb_ep *_ep)
> +{
> + struct mv_u3d *u3d;
> + struct mv_u3d_ep *ep;
> + struct mv_u3d_ep_context *ep_context;
> + u32 epxcr, direction;
> +
> + ep = container_of(_ep, struct mv_u3d_ep, ep);
> + if ((!_ep) || !ep->ep.desc)
should check for !_ep before container_of()
> + return -EINVAL;
> +
> + u3d = ep->u3d;
> +
> + /* Get the endpoint context address */
> + ep_context = ep->ep_context;
> +
> + direction = mv_u3d_ep_dir(ep);
> +
> + /* nuke all pending requests (does flush) */
> + mv_u3d_nuke(ep, -ESHUTDOWN);
> +
> + /* Disable the endpoint for Rx or Tx and reset the endpoint type */
> + if (direction == MV_U3D_EP_DIR_OUT) {
> + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
> + epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
> + | USB_ENDPOINT_XFERTYPE_MASK);
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
> + } else {
> + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
> + epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
> + | USB_ENDPOINT_XFERTYPE_MASK);
> + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
> + }
> +
> + ep->enabled = 0;
> +
> + ep->ep.desc = NULL;
> + return 0;
> +}
> +
> +static struct usb_request *
> +mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
> +{
> + struct mv_u3d_req *req = NULL;
> +
> + req = kzalloc(sizeof *req, gfp_flags);
> + if (!req)
> + return NULL;
> +
> + INIT_LIST_HEAD(&req->queue);
> +
> + return &req->req;
> +}
> +
> +static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req)
> +{
> + struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req);
> +
> + kfree(req);
> +}
> +
> +static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep)
> +{
> + struct mv_u3d *u3d;
> + u32 direction;
> + struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
> + unsigned int loops;
> + u32 tmp;
> +
> + /* if endpoint is not enabled, cannot flush endpoint */
> + if (!ep->enabled)
> + return;
> +
> + u3d = ep->u3d;
> + direction = mv_u3d_ep_dir(ep);
> +
> + /* ep0 need clear bit after flushing fifo. */
> + if (!ep->ep_num) {
> + if (direction == MV_U3D_EP_DIR_OUT) {
> + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
> + tmp |= MV_U3D_EPXCR_EP_FLUSH;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
> + udelay(10);
> + tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
> + } else {
> + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
> + tmp |= MV_U3D_EPXCR_EP_FLUSH;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
> + udelay(10);
> + tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
> + }
> + return;
> + }
> +
> + if (direction == MV_U3D_EP_DIR_OUT) {
> + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
> + tmp |= MV_U3D_EPXCR_EP_FLUSH;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
> +
> + /* Wait until flushing completed */
> + loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
> + while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) &
> + MV_U3D_EPXCR_EP_FLUSH) {
> + /*
> + * EP_FLUSH bit should be cleared to indicate this
> + * operation is complete
> + */
> + if (loops == 0) {
> + dev_dbg(u3d->dev,
> + "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
> + direction ? "in" : "out");
> + return;
> + }
> + loops--;
> + udelay(LOOPS_USEC);
> + }
> + } else { /* EP_DIR_IN */
> + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
> + tmp |= MV_U3D_EPXCR_EP_FLUSH;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
> +
> + /* Wait until flushing completed */
> + loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
> + while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) &
> + MV_U3D_EPXCR_EP_FLUSH) {
> + /*
> + * EP_FLUSH bit should be cleared to indicate this
> + * operation is complete
> + */
> + if (loops == 0) {
> + dev_dbg(u3d->dev,
> + "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
> + direction ? "in" : "out");
> + return;
> + }
> + loops--;
> + udelay(LOOPS_USEC);
> + }
> + }
> +}
> +
> +/* queues (submits) an I/O request to an endpoint */
> +static int
> +mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
> +{
> + struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
> + struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req);
> + struct mv_u3d *u3d = ep->u3d;
> + unsigned long flags;
> + int is_first_req = 0;
> +
> + if (!ep->ep_num
> + && u3d->ep0_state == MV_U3D_STATUS_STAGE
> + && !_req->length) {
> + dev_dbg(u3d->dev, "ep0 status stage\n");
> + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
> + return 0;
> + }
> +
> + dev_dbg(u3d->dev, "%s: %s, req: 0x%x\n",
> + __func__, _ep->name, (u32)req);
> + /* catch various bogus parameters */
> + if (!_req || !req->req.complete || !req->req.buf
> + || !list_empty(&req->queue)) {
> + dev_err(u3d->dev,
> + "%s, bad params, _req: 0x%x,"
> + "req->req.complete: 0x%x, req->req.buf: 0x%x,"
> + "list_empty: 0x%x\n",
> + __func__, (u32)_req,
> + (u32)req->req.complete, (u32)req->req.buf,
> + (u32)list_empty(&req->queue));
> + return -EINVAL;
> + }
> + if (unlikely(!_ep || !ep->ep.desc)) {
> + dev_err(u3d->dev, "%s, bad ep\n", __func__);
> + return -EINVAL;
> + }
> + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
> + if (req->req.length > ep->ep.maxpacket)
> + return -EMSGSIZE;
> + }
> +
> + if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) {
> + dev_err(u3d->dev,
> + "%s, bad params of driver/speed\n", __func__);
do you really need the function name here ??
> + return -ESHUTDOWN;
> + }
> +
> + req->ep = ep;
> +
> + /* Software list handles usb request. */
> + spin_lock_irqsave(&ep->req_lock, flags);
> + is_first_req = list_empty(&ep->req_list);
> + list_add_tail(&req->list, &ep->req_list);
> + spin_unlock_irqrestore(&ep->req_lock, flags);
> + if (!is_first_req) {
> + dev_dbg(u3d->dev, "list is not empty\n");
> + return 0;
> + }
> +
> + dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n");
> + spin_lock_irqsave(&u3d->lock, flags);
> + mv_u3d_start_queue(ep);
> + spin_unlock_irqrestore(&u3d->lock, flags);
> + return 0;
> +}
> +
> +/* dequeues (cancels, unlinks) an I/O request from an endpoint */
> +static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
> +{
> + struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
> + struct mv_u3d_req *req;
> + struct mv_u3d *u3d = ep->u3d;
> + struct mv_u3d_ep_context *ep_context;
> + struct mv_u3d_req *next_req;
> +
> + unsigned long flags;
> + int ret = 0;
> +
> + if (!_ep || !_req)
> + return -EINVAL;
> +
> + spin_lock_irqsave(&ep->u3d->lock, flags);
> +
> + /* make sure it's actually queued on this endpoint */
> + list_for_each_entry(req, &ep->queue, queue) {
> + if (&req->req == _req)
> + break;
> + }
> + if (&req->req != _req) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + /* The request is in progress, or completed but not dequeued */
> + if (ep->queue.next == &req->queue) {
> + _req->status = -ECONNRESET;
> + mv_u3d_ep_fifo_flush(_ep);
> +
> + /* The request isn't the last request in this ep queue */
> + if (req->queue.next != &ep->queue) {
> + dev_dbg(u3d->dev,
> + "it is the last request in this ep queue\n");
> + ep_context = ep->ep_context;
> + next_req = list_entry(req->queue.next,
> + struct mv_u3d_req, queue);
> +
> + /* Point first TRB of next request to the EP context. */
> + iowrite32((u32) next_req->trb_head,
> + &ep_context->trb_addr_lo);
> + } else {
> + struct mv_u3d_ep_context *ep_context;
> + ep_context = ep->ep_context;
> + ep_context->trb_addr_lo = 0;
> + ep_context->trb_addr_hi = 0;
> + }
> +
> + } else
> + WARN_ON(1);
> +
> + mv_u3d_done(ep, req, -ECONNRESET);
> +
> + /* remove the req from the ep req list */
> + if (!list_empty(&ep->req_list)) {
> + struct mv_u3d_req *curr_req;
> + curr_req = list_entry(ep->req_list.next,
> + struct mv_u3d_req, list);
> + if (curr_req == req) {
> + list_del_init(&req->list);
> + ep->processing = 0;
> + }
> + }
> +
> +out:
> + spin_unlock_irqrestore(&ep->u3d->lock, flags);
> + return ret;
> +}
> +
> +static void
> +mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall)
> +{
> + u32 tmp;
> + struct mv_u3d_ep *ep = u3d->eps;
> +
> + dev_dbg(u3d->dev, "%s\n", __func__);
> + if (direction == MV_U3D_EP_DIR_OUT) {
> + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
> + if (stall)
> + tmp |= MV_U3D_EPXCR_EP_HALT;
> + else
> + tmp &= ~MV_U3D_EPXCR_EP_HALT;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
> + } else {
> + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
> + if (stall)
> + tmp |= MV_U3D_EPXCR_EP_HALT;
> + else
> + tmp &= ~MV_U3D_EPXCR_EP_HALT;
> + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
> + }
> +}
> +
> +static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
> +{
> + struct mv_u3d_ep *ep;
> + unsigned long flags = 0;
> + int status = 0;
> + struct mv_u3d *u3d;
> +
> + ep = container_of(_ep, struct mv_u3d_ep, ep);
> + u3d = ep->u3d;
> + if (!_ep || !ep->ep.desc) {
> + status = -EINVAL;
> + goto out;
> + }
> +
> + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
> + status = -EOPNOTSUPP;
> + goto out;
> + }
> +
> + /*
> + * Attempt to halt IN ep will fail if any transfer requests
> + * are still queue
> + */
> + if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN)
> + && !list_empty(&ep->queue)) {
> + status = -EAGAIN;
> + goto out;
> + }
> +
> + spin_lock_irqsave(&ep->u3d->lock, flags);
> + mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt);
> + if (halt && wedge)
> + ep->wedge = 1;
> + else if (!halt)
> + ep->wedge = 0;
> + spin_unlock_irqrestore(&ep->u3d->lock, flags);
> +
> + if (ep->ep_num == 0)
> + u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
> +out:
> + return status;
> +}
> +
> +static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt)
> +{
> + return mv_u3d_ep_set_halt_wedge(_ep, halt, 0);
> +}
> +
> +static int mv_u3d_ep_set_wedge(struct usb_ep *_ep)
> +{
> + return mv_u3d_ep_set_halt_wedge(_ep, 1, 1);
> +}
> +
> +static struct usb_ep_ops mv_u3d_ep_ops = {
> + .enable = mv_u3d_ep_enable,
> + .disable = mv_u3d_ep_disable,
> +
> + .alloc_request = mv_u3d_alloc_request,
> + .free_request = mv_u3d_free_request,
> +
> + .queue = mv_u3d_ep_queue,
> + .dequeue = mv_u3d_ep_dequeue,
> +
> + .set_wedge = mv_u3d_ep_set_wedge,
> + .set_halt = mv_u3d_ep_set_halt,
> + .fifo_flush = mv_u3d_ep_fifo_flush,
> +};
> +
> +static void mv_u3d_controller_stop(struct mv_u3d *u3d)
> +{
> + u32 tmp;
> +
> + if (!u3d->clock_gating && u3d->vbus_valid_detect)
> + iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID,
> + &u3d->vuc_regs->intrenable);
> + else
> + iowrite32(0, &u3d->vuc_regs->intrenable);
> + iowrite32(~0x0, &u3d->vuc_regs->endcomplete);
> + iowrite32(~0x0, &u3d->vuc_regs->trbunderrun);
> + iowrite32(~0x0, &u3d->vuc_regs->trbcomplete);
> + iowrite32(~0x0, &u3d->vuc_regs->linkchange);
> + iowrite32(0x1, &u3d->vuc_regs->setuplock);
> +
> + /* Reset the RUN bit in the command register to stop USB */
> + tmp = ioread32(&u3d->op_regs->usbcmd);
> + tmp &= ~MV_U3D_CMD_RUN_STOP;
> + iowrite32(tmp, &u3d->op_regs->usbcmd);
> + dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n",
> + ioread32(&u3d->op_regs->usbcmd));
> +}
> +
> +static void mv_u3d_controller_start(struct mv_u3d *u3d)
> +{
> + u32 usbintr;
> + u32 temp;
> +
> + /* enable link LTSSM state machine */
> + temp = ioread32(&u3d->vuc_regs->ltssm);
> + temp |= MV_U3D_LTSSM_PHY_INIT_DONE;
> + iowrite32(temp, &u3d->vuc_regs->ltssm);
> +
> + /* Enable interrupts */
> + usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR |
> + MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE |
> + MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP |
> + (u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0);
> + iowrite32(usbintr, &u3d->vuc_regs->intrenable);
> +
> + /* Enable ctrl ep */
> + iowrite32(0x1, &u3d->vuc_regs->ctrlepenable);
> +
> + /* Set the Run bit in the command register */
> + iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd);
> + dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n",
> + ioread32(&u3d->op_regs->usbcmd));
> +}
> +
> +static int mv_u3d_controller_reset(struct mv_u3d *u3d)
> +{
> + unsigned int loops;
> + u32 tmp;
> +
> + /* Stop the controller */
> + tmp = ioread32(&u3d->op_regs->usbcmd);
> + tmp &= ~MV_U3D_CMD_RUN_STOP;
> + iowrite32(tmp, &u3d->op_regs->usbcmd);
> +
> + /* Reset the controller to get default values */
> + iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd);
> +
> + /* wait for reset to complete */
> + loops = LOOPS(MV_U3D_RESET_TIMEOUT);
> + while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) {
> + if (loops == 0) {
> + dev_err(u3d->dev,
> + "Wait for RESET completed TIMEOUT\n");
> + return -ETIMEDOUT;
> + }
> + loops--;
> + udelay(LOOPS_USEC);
> + }
> +
> + /* Configure the Endpoint Context Address */
> + iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl);
> + iowrite32(0, &u3d->op_regs->dcbaaph);
> +
> + return 0;
> +}
> +
> +static int mv_u3d_enable(struct mv_u3d *u3d)
> +{
> + struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
> + int retval;
> +
> + if (u3d->active)
> + return 0;
> +
> + if (u3d->clock_gating == 0) {
> + u3d->active = 1;
> + return 0;
> + }
> +
> + dev_dbg(u3d->dev, "enable u3d\n");
> + clk_enable(u3d->clk);
> + if (pdata->phy_init) {
> + retval = pdata->phy_init(u3d->phy_regs);
> + if (retval) {
> + dev_err(u3d->dev,
> + "init phy error %d\n", retval);
> + clk_disable(u3d->clk);
> + return retval;
> + }
> + }
> + u3d->active = 1;
> +
> + return 0;
> +}
> +
> +static void mv_u3d_disable(struct mv_u3d *u3d)
> +{
> + struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
> + if (u3d->clock_gating && u3d->active) {
> + dev_dbg(u3d->dev, "disable u3d\n");
> + if (pdata->phy_deinit)
> + pdata->phy_deinit(u3d->phy_regs);
> + clk_disable(u3d->clk);
> + u3d->active = 0;
> + }
> +}
> +
> +static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active)
> +{
> + struct mv_u3d *u3d;
> + unsigned long flags;
> + int retval = 0;
> +
> + u3d = container_of(gadget, struct mv_u3d, gadget);
> +
> + spin_lock_irqsave(&u3d->lock, flags);
> +
> + u3d->vbus_active = (is_active != 0);
> + dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
> + __func__, u3d->softconnect, u3d->vbus_active);
> + /*
> + * 1. external VBUS detect: we can disable/enable clock on demand.
> + * 2. UDC VBUS detect: we have to enable clock all the time.
> + * 3. No VBUS detect: we have to enable clock all the time.
> + */
> + if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
> + retval = mv_u3d_enable(u3d);
> + if (retval == 0) {
> + /*
> + * after clock is disabled, we lost all the register
> + * context. We have to re-init registers
> + */
> + mv_u3d_controller_reset(u3d);
> + mv_u3d_ep0_reset(u3d);
> + mv_u3d_controller_start(u3d);
> + }
> + } else if (u3d->driver && u3d->softconnect) {
> + if (!u3d->active)
> + goto out;
> +
> + /* stop all the transfer in queue*/
> + mv_u3d_stop_activity(u3d, u3d->driver);
> + mv_u3d_controller_stop(u3d);
> + mv_u3d_disable(u3d);
> + }
> +
> +out:
> + spin_unlock_irqrestore(&u3d->lock, flags);
> + return retval;
> +}
> +
> +/* constrain controller's VBUS power usage
> + * This call is used by gadget drivers during SET_CONFIGURATION calls,
> + * reporting how much power the device may consume. For example, this
> + * could affect how quickly batteries are recharged.
> + *
> + * Returns zero on success, else negative errno.
> + */
> +static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA)
> +{
> + struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
> +
> + u3d->power = mA;
> +
> + return 0;
> +}
> +
> +static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on)
> +{
> + struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
> + unsigned long flags;
> + int retval = 0;
> +
> + spin_lock_irqsave(&u3d->lock, flags);
> +
> + dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
> + __func__, u3d->softconnect, u3d->vbus_active);
> + u3d->softconnect = (is_on != 0);
> + if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
> + retval = mv_u3d_enable(u3d);
> + if (retval == 0) {
> + /*
> + * after clock is disabled, we lost all the register
> + * context. We have to re-init registers
> + */
> + mv_u3d_controller_reset(u3d);
> + mv_u3d_ep0_reset(u3d);
> + mv_u3d_controller_start(u3d);
> + }
> + } else if (u3d->driver && u3d->vbus_active) {
> + /* stop all the transfer in queue*/
> + mv_u3d_stop_activity(u3d, u3d->driver);
> + mv_u3d_controller_stop(u3d);
> + mv_u3d_disable(u3d);
> + }
> +
> + spin_unlock_irqrestore(&u3d->lock, flags);
> +
> + return retval;
> +}
> +
> +static int mv_u3d_start(struct usb_gadget *g,
> + struct usb_gadget_driver *driver)
> +{
> + struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
> + unsigned long flags;
> +
> + if (u3d->driver)
> + return -EBUSY;
> +
> + spin_lock_irqsave(&u3d->lock, flags);
> +
> + /* hook up the driver ... */
> + driver->driver.bus = NULL;
> + u3d->driver = driver;
> + u3d->gadget.dev.driver = &driver->driver;
> +
> + u3d->ep0_dir = USB_DIR_OUT;
> +
> + spin_unlock_irqrestore(&u3d->lock, flags);
> +
> + u3d->vbus_valid_detect = 1;
> +
> + return 0;
> +}
> +
> +static int mv_u3d_stop(struct usb_gadget *g,
> + struct usb_gadget_driver *driver)
> +{
> + struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
> + unsigned long flags;
> +
> + u3d->vbus_valid_detect = 0;
> + spin_lock_irqsave(&u3d->lock, flags);
> +
> + mv_u3d_enable(u3d);
> + mv_u3d_controller_stop(u3d);
> + /* stop all usb activities */
> + u3d->gadget.speed = USB_SPEED_UNKNOWN;
> + mv_u3d_stop_activity(u3d, driver);
> + mv_u3d_disable(u3d);
> +
> + spin_unlock_irqrestore(&u3d->lock, flags);
> +
> + u3d->gadget.dev.driver = NULL;
> + u3d->driver = NULL;
> +
> + return 0;
> +}
> +
> +
> +/* device controller usb_gadget_ops structure */
> +static const struct usb_gadget_ops mv_u3d_ops = {
> + /* notify controller that VBUS is powered or not */
> + .vbus_session = mv_u3d_vbus_session,
> +
> + /* constrain controller's VBUS power usage */
> + .vbus_draw = mv_u3d_vbus_draw,
> +
> + .pullup = mv_u3d_pullup,
> + .udc_start = mv_u3d_start,
> + .udc_stop = mv_u3d_stop,
> +};
> +
> +static int mv_u3d_eps_init(struct mv_u3d *u3d)
> +{
> + struct mv_u3d_ep *ep;
> + char name[14];
> + int i;
> +
> + /* initialize ep0, ep0 in/out use eps[1] */
> + ep = &u3d->eps[1];
> + ep->u3d = u3d;
> + strncpy(ep->name, "ep0", sizeof(ep->name));
> + ep->ep.name = ep->name;
> + ep->ep.ops = &mv_u3d_ep_ops;
> + ep->wedge = 0;
> + ep->ep.maxpacket = MV_U3D_EP0_MAX_PKT_SIZE;
> + ep->ep_num = 0;
> + ep->ep.desc = &mv_u3d_ep0_desc;
> + INIT_LIST_HEAD(&ep->queue);
> + INIT_LIST_HEAD(&ep->req_list);
> + ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
> +
> + /* add ep0 ep_context */
> + ep->ep_context = &u3d->ep_context[1];
> +
> + /* initialize other endpoints */
> + for (i = 2; i < u3d->max_eps * 2; i++) {
> + ep = &u3d->eps[i];
> + if (i & 1) {
> + snprintf(name, sizeof(name), "ep%din", i >> 1);
> + ep->direction = MV_U3D_EP_DIR_IN;
> + } else {
> + snprintf(name, sizeof(name), "ep%dout", i >> 1);
> + ep->direction = MV_U3D_EP_DIR_OUT;
> + }
> + ep->u3d = u3d;
> + strncpy(ep->name, name, sizeof(ep->name));
> + ep->ep.name = ep->name;
> +
> + ep->ep.ops = &mv_u3d_ep_ops;
> + ep->ep.maxpacket = (unsigned short) ~0;
> + ep->ep_num = i / 2;
> +
> + INIT_LIST_HEAD(&ep->queue);
> + list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list);
> +
> + INIT_LIST_HEAD(&ep->req_list);
> + spin_lock_init(&ep->req_lock);
> + ep->ep_context = &u3d->ep_context[i];
> + }
> +
> + return 0;
> +}
> +
> +/* delete all endpoint requests, called with spinlock held */
> +static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status)
> +{
> + /* endpoint fifo flush */
> + mv_u3d_ep_fifo_flush(&ep->ep);
> +
> + while (!list_empty(&ep->queue)) {
> + struct mv_u3d_req *req = NULL;
> + req = list_entry(ep->queue.next, struct mv_u3d_req, queue);
> + mv_u3d_done(ep, req, status);
> + }
> +}
> +
> +/* stop all USB activities */
> +static
> +void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver)
> +{
> + struct mv_u3d_ep *ep;
> +
> + mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN);
> +
> + list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) {
> + mv_u3d_nuke(ep, -ESHUTDOWN);
> + }
> +
> + /* report disconnect; the driver is already quiesced */
> + if (driver) {
> + spin_unlock(&u3d->lock);
> + driver->disconnect(&u3d->gadget);
> + spin_lock(&u3d->lock);
> + }
> +}
> +
> +static void mv_u3d_irq_process_error(struct mv_u3d *u3d)
> +{
> + /* Increment the error count */
> + u3d->errors++;
> + dev_err(u3d->dev, "%s\n", __func__);
> +}
> +
> +static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d)
> +{
> + u32 linkchange;
> +
> + linkchange = ioread32(&u3d->vuc_regs->linkchange);
> + iowrite32(linkchange, &u3d->vuc_regs->linkchange);
> +
> + dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange);
> +
> + if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) {
> + dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n",
> + ioread32(&u3d->vuc_regs->ltssmstate));
> +
> + u3d->usb_state = USB_STATE_DEFAULT;
> + u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
> + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
> +
> + /* set speed */
> + u3d->gadget.speed = USB_SPEED_SUPER;
> + }
> +
> + if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) {
> + dev_dbg(u3d->dev, "link suspend\n");
> + u3d->resume_state = u3d->usb_state;
> + u3d->usb_state = USB_STATE_SUSPENDED;
> + }
> +
> + if (linkchange & MV_U3D_LINK_CHANGE_RESUME) {
> + dev_dbg(u3d->dev, "link resume\n");
> + u3d->usb_state = u3d->resume_state;
> + u3d->resume_state = 0;
> + }
> +
> + if (linkchange & MV_U3D_LINK_CHANGE_WRESET) {
> + dev_dbg(u3d->dev, "warm reset\n");
> + u3d->usb_state = USB_STATE_POWERED;
> + }
> +
> + if (linkchange & MV_U3D_LINK_CHANGE_HRESET) {
> + dev_dbg(u3d->dev, "hot reset\n");
> + u3d->usb_state = USB_STATE_DEFAULT;
> + }
> +
> + if (linkchange & MV_U3D_LINK_CHANGE_INACT)
> + dev_dbg(u3d->dev, "inactive\n");
> +
> + if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0)
> + dev_dbg(u3d->dev, "ss.disabled\n");
> +
> + if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) {
> + dev_dbg(u3d->dev, "vbus invalid\n");
> + u3d->usb_state = USB_STATE_ATTACHED;
> + u3d->vbus_valid_detect = 1;
> + /* if external vbus detect is not supported,
> + * we handle it here.
> + */
> + if (!u3d->vbus) {
> + spin_unlock(&u3d->lock);
> + mv_u3d_vbus_session(&u3d->gadget, 0);
> + spin_lock(&u3d->lock);
> + }
> + }
> +}
> +
> +static void mv_u3d_ch9setaddress(struct mv_u3d *u3d,
> + struct usb_ctrlrequest *setup)
> +{
> + u32 tmp;
> +
> + if (u3d->usb_state != USB_STATE_DEFAULT) {
> + dev_err(u3d->dev,
> + "%s, cannot setaddr in this state (%d)\n",
> + __func__, u3d->usb_state);
> + goto err;
> + }
> +
> + u3d->dev_addr = (u8)setup->wValue;
> +
> + dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr);
> +
> + if (u3d->dev_addr > 127) {
> + dev_err(u3d->dev,
> + "%s, u3d address is wrong (out of range)\n", __func__);
> + u3d->dev_addr = 0;
> + goto err;
> + }
> +
> + /* update usb state */
> + u3d->usb_state = USB_STATE_ADDRESS;
> +
> + /* set the new address */
> + tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr);
> + tmp &= ~0x7F;
> + tmp |= (u32)u3d->dev_addr;
> + iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr);
> +
> + return;
> +err:
> + mv_u3d_ep0_stall(u3d);
> +}
> +
> +static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup)
> +{
> + if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
> + if (setup->bRequest == USB_REQ_SET_CONFIGURATION)
> + return 1;
> +
> + return 0;
> +}
> +
> +static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num,
> + struct usb_ctrlrequest *setup)
> +{
> + bool delegate = false;
> +
> + mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN);
> +
> + dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
> + setup->bRequestType, setup->bRequest,
> + setup->wValue, setup->wIndex, setup->wLength);
> +
> + /* We process some stardard setup requests here */
> + if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
> + switch (setup->bRequest) {
> + case USB_REQ_GET_STATUS:
> + delegate = true;
> + break;
> +
> + case USB_REQ_SET_ADDRESS:
> + mv_u3d_ch9setaddress(u3d, setup);
> + break;
> +
> + case USB_REQ_CLEAR_FEATURE:
> + delegate = true;
> + break;
> +
> + case USB_REQ_SET_FEATURE:
> + delegate = true;
> + break;
> +
> + default:
> + delegate = true;
> + }
> + } else
> + delegate = true;
> +
> + /* delegate USB standard requests to the gadget driver */
> + if (delegate == true) {
> + /* USB requests handled by gadget */
> + if (setup->wLength) {
> + /* DATA phase from gadget, STATUS phase from u3d */
> + u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN)
> + ? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT;
> + spin_unlock(&u3d->lock);
> + if (u3d->driver->setup(&u3d->gadget,
> + &u3d->local_setup_buff) < 0) {
> + dev_err(u3d->dev, "setup error!\n");
> + mv_u3d_ep0_stall(u3d);
> + }
> + spin_lock(&u3d->lock);
> + } else {
> + /* no DATA phase, STATUS phase from gadget */
> + u3d->ep0_dir = MV_U3D_EP_DIR_IN;
> + u3d->ep0_state = MV_U3D_STATUS_STAGE;
> + spin_unlock(&u3d->lock);
> + if (u3d->driver->setup(&u3d->gadget,
> + &u3d->local_setup_buff) < 0)
> + mv_u3d_ep0_stall(u3d);
> + spin_lock(&u3d->lock);
> + }
> +
> + if (mv_u3d_is_set_configuration(setup)) {
> + dev_dbg(u3d->dev, "u3d configured\n");
> + u3d->usb_state = USB_STATE_CONFIGURED;
> + }
> + }
> +}
> +
> +static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr)
> +{
> + struct mv_u3d_ep_context *epcontext;
> +
> + epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN];
> +
> + /* Copy the setup packet to local buffer */
> + memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8);
> +}
> +
> +static void mv_u3d_irq_process_setup(struct mv_u3d *u3d)
> +{
> + u32 tmp, i;
> + /* Process all Setup packet received interrupts */
> + tmp = ioread32(&u3d->vuc_regs->setuplock);
> + if (tmp) {
> + for (i = 0; i < u3d->max_eps; i++) {
> + if (tmp & (1 << i)) {
> + mv_u3d_get_setup_data(u3d, i,
> + (u8 *)(&u3d->local_setup_buff));
> + mv_u3d_handle_setup_packet(u3d, i,
> + &u3d->local_setup_buff);
> + }
> + }
> + }
> +
> + iowrite32(tmp, &u3d->vuc_regs->setuplock);
> +}
> +
> +static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d)
> +{
> + u32 tmp, bit_pos;
> + int i, ep_num = 0, direction = 0;
> + struct mv_u3d_ep *curr_ep;
> + struct mv_u3d_req *curr_req, *temp_req;
> + int status;
> +
> + tmp = ioread32(&u3d->vuc_regs->endcomplete);
> +
> + dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp);
> + if (!tmp)
> + return;
> + iowrite32(tmp, &u3d->vuc_regs->endcomplete);
> +
> + for (i = 0; i < u3d->max_eps * 2; i++) {
> + ep_num = i >> 1;
> + direction = i % 2;
> +
> + bit_pos = 1 << (ep_num + 16 * direction);
> +
> + if (!(bit_pos & tmp))
> + continue;
> +
> + if (i == 0)
> + curr_ep = &u3d->eps[1];
> + else
> + curr_ep = &u3d->eps[i];
> +
> + /* remove req out of ep request list after completion */
> + dev_dbg(u3d->dev, "tr comp: check req_list\n");
> + spin_lock(&curr_ep->req_lock);
> + if (!list_empty(&curr_ep->req_list)) {
> + struct mv_u3d_req *req;
> + req = list_entry(curr_ep->req_list.next,
> + struct mv_u3d_req, list);
> + list_del_init(&req->list);
> + curr_ep->processing = 0;
> + }
> + spin_unlock(&curr_ep->req_lock);
> +
> + /* process the req queue until an uncomplete request */
> + list_for_each_entry_safe(curr_req, temp_req,
> + &curr_ep->queue, queue) {
> + status = mv_u3d_process_ep_req(u3d, i, curr_req);
> + if (status)
> + break;
> + /* write back status to req */
> + curr_req->req.status = status;
> +
> + /* ep0 request completion */
> + if (ep_num == 0) {
> + mv_u3d_done(curr_ep, curr_req, 0);
> + break;
> + } else {
> + mv_u3d_done(curr_ep, curr_req, status);
> + }
> + }
> +
> + dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n");
> + mv_u3d_start_queue(curr_ep);
> + }
> +}
> +
> +static irqreturn_t mv_u3d_irq(int irq, void *dev)
> +{
> + struct mv_u3d *u3d = (struct mv_u3d *)dev;
> + u32 status, intr;
> + u32 bridgesetting;
> + u32 trbunderrun;
> +
> + spin_lock(&u3d->lock);
> +
> + status = ioread32(&u3d->vuc_regs->intrcause);
> + intr = ioread32(&u3d->vuc_regs->intrenable);
> + status &= intr;
> +
> + if (status == 0) {
> + spin_unlock(&u3d->lock);
> + dev_err(u3d->dev, "irq error!\n");
> + return IRQ_NONE;
> + }
> +
> + if (status & MV_U3D_USBINT_VBUS_VALID) {
> + bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting);
> + if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) {
> + /* write vbus valid bit of bridge setting to clear */
> + bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID;
> + iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting);
> + dev_dbg(u3d->dev, "vbus valid\n");
> +
> + u3d->usb_state = USB_STATE_POWERED;
> + u3d->vbus_valid_detect = 0;
> + /* if external vbus detect is not supported,
> + * we handle it here.
> + */
> + if (!u3d->vbus) {
> + spin_unlock(&u3d->lock);
> + mv_u3d_vbus_session(&u3d->gadget, 1);
> + spin_lock(&u3d->lock);
> + }
> + } else
> + dev_err(u3d->dev, "vbus bit is not set\n");
> + }
> +
> + /* RX data is already in the 16KB FIFO.*/
> + if (status & MV_U3D_USBINT_UNDER_RUN) {
> + trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun);
> + dev_err(u3d->dev, "under run, ep%d\n", trbunderrun);
> + iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun);
> + mv_u3d_irq_process_error(u3d);
> + }
> +
> + if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) {
> + /* write one to clear */
> + iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR
> + | MV_U3D_USBINT_TXDESC_ERR),
> + &u3d->vuc_regs->intrcause);
> + dev_err(u3d->dev, "desc err 0x%x\n", status);
> + mv_u3d_irq_process_error(u3d);
> + }
> +
> + if (status & MV_U3D_USBINT_LINK_CHG)
> + mv_u3d_irq_process_link_change(u3d);
> +
> + if (status & MV_U3D_USBINT_TX_COMPLETE)
> + mv_u3d_irq_process_tr_complete(u3d);
> +
> + if (status & MV_U3D_USBINT_RX_COMPLETE)
> + mv_u3d_irq_process_tr_complete(u3d);
> +
> + if (status & MV_U3D_USBINT_SETUP)
> + mv_u3d_irq_process_setup(u3d);
> +
> + spin_unlock(&u3d->lock);
> + return IRQ_HANDLED;
> +}
> +
> +static void mv_u3d_gadget_release(struct device *dev)
> +{
> + dev_dbg(dev, "%s\n", __func__);
> +}
> +
> +static __devexit int mv_u3d_remove(struct platform_device *dev)
> +{
> + struct mv_u3d *u3d = platform_get_drvdata(dev);
> +
> + BUG_ON(u3d == NULL);
> +
> + usb_del_gadget_udc(&u3d->gadget);
> +
> + /* free memory allocated in probe */
> + if (u3d->trb_pool)
> + dma_pool_destroy(u3d->trb_pool);
> +
> + if (u3d->ep_context)
> + dma_free_coherent(&dev->dev, u3d->ep_context_size,
> + u3d->ep_context, u3d->ep_context_dma);
> +
> + kfree(u3d->eps);
> +
> + if (u3d->irq)
> + free_irq(u3d->irq, &dev->dev);
> +
> + mv_u3d_disable(u3d);
> +
> + if (u3d->cap_regs)
> + iounmap(u3d->cap_regs);
> + u3d->cap_regs = NULL;
> +
> + kfree(u3d->status_req);
> +
> + clk_put(u3d->clk);
> +
> + device_unregister(&u3d->gadget.dev);
> +
> + platform_set_drvdata(dev, NULL);
> +
> + kfree(u3d);
> +
> + return 0;
> +}
> +
> +static int mv_u3d_probe(struct platform_device *dev)
> +{
> + struct mv_u3d *u3d = NULL;
> + struct mv_usb_platform_data *pdata = dev->dev.platform_data;
> + int retval = 0;
> + struct resource *r;
> + size_t size;
> +
> + if (!dev->dev.platform_data) {
> + dev_err(&dev->dev, "missing platform_data\n");
> + retval = -ENODEV;
> + goto err_pdata;
> + }
> +
> + u3d = kzalloc(sizeof(*u3d), GFP_KERNEL);
> + if (!u3d) {
> + dev_err(&dev->dev, "failed to allocate memory for u3d\n");
> + retval = -ENOMEM;
> + goto err_alloc_private;
> + }
> +
> + spin_lock_init(&u3d->lock);
> +
> + platform_set_drvdata(dev, u3d);
> +
> + u3d->dev = &dev->dev;
> + u3d->vbus = pdata->vbus;
> +
> + u3d->clk = clk_get(&dev->dev, pdata->clkname[0]);
> + if (IS_ERR(u3d->clk)) {
> + retval = PTR_ERR(u3d->clk);
> + goto err_get_clk;
> + }
> +
> + r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs");
> + if (!r) {
> + dev_err(&dev->dev, "no I/O memory resource defined\n");
> + retval = -ENODEV;
> + goto err_get_cap_regs;
> + }
> +
> + u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *)
> + ioremap(r->start, resource_size(r));
> + if (!u3d->cap_regs) {
> + dev_err(&dev->dev, "failed to map I/O memory\n");
> + retval = -EBUSY;
> + goto err_map_cap_regs;
> + } else {
> + dev_dbg(&dev->dev, "cap_regs address: 0x%x/0x%x\n",
> + (unsigned int)r->start, (unsigned int)u3d->cap_regs);
> + }
> +
> + /* we will access controller register, so enable the u3d controller */
> + clk_enable(u3d->clk);
> +
> + if (pdata->phy_init) {
> + retval = pdata->phy_init(u3d->phy_regs);
> + if (retval) {
> + dev_err(&dev->dev, "init phy error %d\n", retval);
> + goto err_u3d_enable;
> + }
> + }
> +
> + u3d->op_regs = (struct mv_u3d_op_regs __iomem *)((u32)u3d->cap_regs
> + + MV_U3D_USB3_OP_REGS_OFFSET);
> +
> + u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)((u32)u3d->cap_regs
> + + ioread32(&u3d->cap_regs->vuoff));
> +
> + u3d->max_eps = 16;
> +
> + /*
> + * some platform will use usb to download image, it may not disconnect
> + * usb gadget before loading kernel. So first stop u3d here.
> + */
> + mv_u3d_controller_stop(u3d);
> + iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause);
> +
> + size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2;
> + size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1)
> + & ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1);
> + u3d->ep_context = dma_alloc_coherent(&dev->dev, size,
> + &u3d->ep_context_dma, GFP_KERNEL);
> + if (!u3d->ep_context) {
> + dev_err(&dev->dev, "allocate ep context memory failed\n");
> + retval = -ENOMEM;
> + goto err_alloc_ep_context;
> + }
> + u3d->ep_context_size = size;
> +
> + /* create TRB dma_pool resource */
> + u3d->trb_pool = dma_pool_create("u3d_trb",
> + &dev->dev,
> + sizeof(struct mv_u3d_trb_hw),
> + MV_U3D_TRB_ALIGNMENT,
> + MV_U3D_DMA_BOUNDARY);
> +
> + if (!u3d->trb_pool) {
> + retval = -ENOMEM;
> + goto err_alloc_trb_pool;
> + }
> +
> + size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2;
> + u3d->eps = kzalloc(size, GFP_KERNEL);
> + if (!u3d->eps) {
> + dev_err(&dev->dev, "allocate ep memory failed\n");
> + retval = -ENOMEM;
> + goto err_alloc_eps;
> + }
> +
> + /* initialize ep0 status request structure */
> + u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL);
> + if (!u3d->status_req) {
> + dev_err(&dev->dev, "allocate status_req memory failed\n");
> + retval = -ENOMEM;
> + goto err_alloc_status_req;
> + }
> + INIT_LIST_HEAD(&u3d->status_req->queue);
> +
> + /* allocate a small amount of memory to get valid address */
> + u3d->status_req->req.buf = (char *)u3d->status_req
> + + sizeof(struct mv_u3d_req);
> + u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf);
> +
> + u3d->resume_state = USB_STATE_NOTATTACHED;
> + u3d->usb_state = USB_STATE_ATTACHED;
> + u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
> + u3d->remote_wakeup = 0;
> +
> + r = platform_get_resource(dev, IORESOURCE_IRQ, 0);
> + if (!r) {
> + dev_err(&dev->dev, "no IRQ resource defined\n");
> + retval = -ENODEV;
> + goto err_get_irq;
> + }
> + u3d->irq = r->start;
> + if (request_irq(u3d->irq, mv_u3d_irq,
> + IRQF_DISABLED | IRQF_SHARED, driver_name, u3d)) {
> + u3d->irq = 0;
> + dev_err(&dev->dev, "Request irq %d for u3d failed\n",
> + u3d->irq);
> + retval = -ENODEV;
> + goto err_request_irq;
> + }
> +
> + /* initialize gadget structure */
> + u3d->gadget.ops = &mv_u3d_ops; /* usb_gadget_ops */
> + u3d->gadget.ep0 = &u3d->eps[1].ep; /* gadget ep0 */
> + INIT_LIST_HEAD(&u3d->gadget.ep_list); /* ep_list */
> + u3d->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
> +
> + /* the "gadget" abstracts/virtualizes the controller */
> + dev_set_name(&u3d->gadget.dev, "gadget");
> + u3d->gadget.dev.parent = &dev->dev;
> + u3d->gadget.dev.dma_mask = dev->dev.dma_mask;
> + u3d->gadget.dev.release = mv_u3d_gadget_release;
> + u3d->gadget.name = driver_name; /* gadget name */
> +
> + retval = device_register(&u3d->gadget.dev);
> + if (retval)
> + goto err_register_gadget_device;
> +
> + mv_u3d_eps_init(u3d);
> +
> + /* external vbus detection */
> + if (u3d->vbus) {
> + u3d->clock_gating = 1;
> + dev_err(&dev->dev, "external vbus detection\n");
> + }
> +
> + /*
> + * For saving power disable clk. When clock is disabled,
> + * phy is deinit too.
> + * When clock is always on, It means that VBUS can not be detected,
> + * so enable vbus_active to make controller run at all the time.
> + */
> + if (u3d->clock_gating) {
> + if (pdata->phy_deinit)
> + pdata->phy_deinit(u3d->phy_regs);
> + clk_disable(u3d->clk);
> + } else
> + u3d->vbus_active = 1;
> +
> + /* enable usb3 controller vbus detection */
> + u3d->vbus_valid_detect = 1;
> +
> + retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget);
> + if (retval)
> + goto err_unregister;
> +
> + dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n",
> + u3d->clock_gating ? "with" : "without");
> +
> + return 0;
> +
> +err_unregister:
> + device_unregister(&u3d->gadget.dev);
> +err_register_gadget_device:
> + free_irq(u3d->irq, &dev->dev);
> +err_request_irq:
> +err_get_irq:
> + kfree(u3d->status_req);
> +err_alloc_status_req:
> + kfree(u3d->eps);
> +err_alloc_eps:
> + dma_pool_destroy(u3d->trb_pool);
> +err_alloc_trb_pool:
> + dma_free_coherent(&dev->dev, u3d->ep_context_size,
> + u3d->ep_context, u3d->ep_context_dma);
> +err_alloc_ep_context:
> + if (pdata->phy_deinit)
> + pdata->phy_deinit(u3d->phy_regs);
> + clk_disable(u3d->clk);
> +err_u3d_enable:
> + iounmap(u3d->cap_regs);
> +err_map_cap_regs:
> +err_get_cap_regs:
> +err_get_clk:
> + clk_put(u3d->clk);
> + platform_set_drvdata(dev, NULL);
> + kfree(u3d);
> +err_alloc_private:
> +err_pdata:
> + return retval;
> +}
> +
> +#ifdef CONFIG_PM
> +static int mv_u3d_suspend(struct device *dev)
> +{
> + struct mv_u3d *u3d = dev_get_drvdata(dev);
> +
> + /*
> + * only cable is unplugged, usb can suspend.
> + * So do not care about clock_gating == 1, it is handled by
> + * vbus session.
> + */
> + if (!u3d->clock_gating) {
> + mv_u3d_controller_stop(u3d);
> +
> + spin_lock_irq(&u3d->lock);
> + /* stop all usb activities */
> + mv_u3d_stop_activity(u3d, u3d->driver);
> + spin_unlock_irq(&u3d->lock);
> +
> + mv_u3d_disable(u3d);
> + }
> +
> + return 0;
> +}
> +
> +static int mv_u3d_resume(struct device *dev)
> +{
> + struct mv_u3d *u3d = dev_get_drvdata(dev);
> + int retval;
> +
> + if (!u3d->clock_gating) {
> + retval = mv_u3d_enable(u3d);
> + if (retval)
> + return retval;
> +
> + if (u3d->driver && u3d->softconnect) {
> + mv_u3d_controller_reset(u3d);
> + mv_u3d_ep0_reset(u3d);
> + mv_u3d_controller_start(u3d);
> + }
> + }
> +
> + return 0;
> +}
> +
> +SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
> +#endif
> +
> +static void mv_u3d_shutdown(struct platform_device *dev)
> +{
> + struct mv_u3d *u3d = dev_get_drvdata(&dev->dev);
> + u32 tmp;
> +
> + tmp = ioread32(&u3d->op_regs->usbcmd);
> + tmp &= ~MV_U3D_CMD_RUN_STOP;
> + iowrite32(tmp, &u3d->op_regs->usbcmd);
> +}
> +
> +static struct platform_driver mv_u3d_driver = {
> + .probe = mv_u3d_probe,
> + .remove = __exit_p(mv_u3d_remove),
> + .shutdown = mv_u3d_shutdown,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "mv-u3d",
> +#ifdef CONFIG_PM
> + .pm = &mv_u3d_pm_ops,
> +#endif
> + },
> +};
> +
> +module_platform_driver(mv_u3d_driver);
> +MODULE_ALIAS("platform:mv-u3d");
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_AUTHOR("Yu Xu <yuxu@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 1.7.9.5
>
--
balbi
Attachment:
signature.asc
Description: Digital signature
