Dear Peter Chen, > > > Yes, I'd prefer to. > > > > Me too. I think we can start with review each other's patch. > > > > > Richard, are these 7 patches the only stuff that I have to apply on top > > > of linux-usb/usb-next to get this working? > > > > Yes. > > Hi Marek and Richard, > > The i.mx28 and i.mx6q use the same USB controller and USB PHY, > Your patchset can be totally the same, only different is platform > part. Below are my commnets for your patchset: > - Use drivers/usb/otg/mxs-phy.c as PHY's driver. > - Use drivers/usb/chipidea/ci13xxx_imx.c as controller's driver, > all freescale usb uses the same controller. > - Use DT for platform support, phandle can work around current > multi-phy support problem. > > My proposal how you work together (already discussed with richard) > - Richard picks marek's controller's patch, and add DT support for > i.mx28, send marek, me, shawn privately. > - Marek tunes this DT patched patchset at i.mx28 platform, > and add Signed-off-by: Richard Zhao <richard.zhao@xxxxxxxxxxxxx> You mean SoB by me, dont you ? ;-) > for patchset, and send to mail list for review > - Richard tests it and give some comments if there is any problems > at i.mx6q. > - Marek re-sends this patchset to mail list for review > > Marek, if you agree with it, please take the responsibilities of the > owner with this patchset, and be active during this patchset review > procedure. Fine with me, where can I get DT-enabled MXS kernel tree please? Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
