Hi Balbi,
2012/5/14 Felipe Balbi <balbi@xxxxxx>:
> On Mon, May 14, 2012 at 06:11:11PM +0800, Yu Xu wrote:
>> Hi Balbi,
>>
>>
>> >> + dev_err(&dev->dev, "failed to allocate memory for u3d\n");
>> >> + retval = -ENOMEM;
>> >> + goto err_alloc_private;
>> >> + }
>> >> +
>> >> + spin_lock_init(&u3d->lock);
>> >> +
>> >> + platform_set_drvdata(dev, u3d);
>> >> +
>> >> + u3d->dev = dev;
>> >> + u3d->pdata = dev->dev.platform_data;
>> >
>> > I believe pdata could be freed after init, no ?
>> >
>> Actually, pdata is still used after init, such as pdata->phy_init/phy_deinit.
>
> k, fair enough.
>
>> >> + u3d->clk = clk_get(&dev->dev, pdata->clkname[0]);
>> >> + if (IS_ERR(u3d->clk)) {
>> >> + retval = PTR_ERR(u3d->clk);
>> >> + goto err_get_clk;
>> >> + }
>> >> +
>> >> + r = platform_get_resource_byname(u3d->dev, IORESOURCE_MEM, "capregs");
>> >> + if (r == NULL) {
>> >> + dev_err(&dev->dev, "no I/O memory resource defined\n");
>> >> + retval = -ENODEV;
>> >> + goto err_get_cap_regs;
>> >> + }
>> >> +
>> >> + u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *)
>> >> + ioremap(r->start, resource_size(r));
>> >> + if (u3d->cap_regs == NULL) {
>> >> + dev_err(&dev->dev, "failed to map I/O memory\n");
>> >> + retval = -EBUSY;
>> >> + goto err_map_cap_regs;
>> >> + } else {
>> >> + dev_dbg(&dev->dev, "cap_regs address: 0x%x/0x%x\n",
>> >> + (unsigned int)r->start, (unsigned int)u3d->cap_regs);
>> >> + }
>> >> +
>> >> + u3d->phy_regs = (u32)u3d->cap_regs + USB3_PHY_OFFSET;
>> >
>> > PHY shouldn't be handled by this driver. You need to write a PHY driver
>> > for controlling the PHY, no ?
>> >
>> Yes, I'll have another patch for PHY.
>
> Then, why even add this here ?
>
Here we just get the PHY register address, but no PHY operation.
Do you mean we need to put it to the PHY driver?
>> >> + /* we will access controller register, so enable the u3d controller */
>> >> + clk_enable(u3d->clk);
>> >> +
>> >> + if (pdata->phy_init) {
>> >> + retval = pdata->phy_init(u3d->phy_regs);
>> >> + if (retval) {
>> >> + dev_err(&dev->dev, "init phy error %d\n", retval);
>> >> + goto err_u3d_enable;
>> >> + }
>> >> + }
>> >> +
>> >> + u3d->op_regs = (struct mv_u3d_op_regs __iomem *)((u32)u3d->cap_regs
>> >> + + USB3_OP_REGS_OFFSET);
>> >> +
>> >> + u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)((u32)u3d->cap_regs
>> >> + + readl(&u3d->cap_regs->vuoff));
>> >> +
>> >> + u3d->max_eps = 16;
>> >> +
>> >> + /*
>> >> + * some platform will use usb to download image, it may not disconnect
>> >> + * usb gadget before loading kernel. So first stop u3d here.
>> >> + */
>> >> + u3d_stop(u3d);
>> >
>> > can't you simply softreset the IP ? Do you have a softreset bit ?
>> >
>> Sorry, there is no such bit to easily reset:(
>
> too bad :-(
>
> --
> balbi
Thanks,
Yu Xu
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
