Two functions - namely: s3c_hsotg_gate and s3c_hsotg_otgreset are platform
dependent and therefore removed from Samsung's generic s3c-hsotg code.
Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/usb/gadget/s3c-hsotg.c | 77 ----------------------------------------
1 files changed, 0 insertions(+), 77 deletions(-)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 70c6f3b..34069dc 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -36,8 +36,6 @@
#include <plat/regs-usb-hsotg-phy.h>
#include "s3c-hsotg.h"
#include <linux/platform_data/s3c-hsotg.h>
-#include <mach/regs-sys.h>
-#include <plat/cpu.h>
#define DMA_ADDR_INVALID (~((dma_addr_t)0))
@@ -2846,51 +2844,6 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
}
}
-/**
- * s3c_hsotg_otgreset - reset the OtG phy block
- * @hsotg: The host state.
- *
- * Power up the phy, set the basic configuration and start the PHY.
- */
-static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
-{
- struct clk *xusbxti;
- u32 pwr, osc;
-
- pwr = readl(S3C_PHYPWR);
- pwr &= ~0x19;
- writel(pwr, S3C_PHYPWR);
- mdelay(1);
-
- osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
-
- xusbxti = clk_get(hsotg->dev, "xusbxti");
- if (xusbxti && !IS_ERR(xusbxti)) {
- switch (clk_get_rate(xusbxti)) {
- case 12*MHZ:
- osc |= S3C_PHYCLK_CLKSEL_12M;
- break;
- case 24*MHZ:
- osc |= S3C_PHYCLK_CLKSEL_24M;
- break;
- default:
- case 48*MHZ:
- /* default reference clock */
- break;
- }
- clk_put(xusbxti);
- }
-
- writel(osc | 0x10, S3C_PHYCLK);
-
- /* issue a full set of resets to the otg and core */
-
- writel(S3C_RSTCON_PHY, S3C_RSTCON);
- udelay(20); /* at-least 10uS */
- writel(0, S3C_RSTCON);
-}
-
-
static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
{
u32 cfg4;
@@ -3263,32 +3216,6 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
debugfs_remove(hsotg->debug_root);
}
-/**
- * s3c_hsotg_gate - set the hardware gate for the block
- * @pdev: The device we bound to
- * @on: On or off.
- *
- * Set the hardware gate setting into the block. If we end up on
- * something other than an S3C64XX, then we might need to change this
- * to using a platform data callback, or some other mechanism.
- */
-static void s3c_hsotg_gate(struct platform_device *pdev, bool on)
-{
- unsigned long flags;
- u32 others;
-
- local_irq_save(flags);
-
- others = __raw_readl(S3C64XX_OTHERS);
- if (on)
- others |= S3C64XX_OTHERS_USBMASK;
- else
- others &= ~S3C64XX_OTHERS_USBMASK;
- __raw_writel(others, S3C64XX_OTHERS);
-
- local_irq_restore(flags);
-}
-
static struct s3c_hsotg_plat s3c_hsotg_default_pdata;
static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
@@ -3390,9 +3317,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
clk_enable(hsotg->clk);
- s3c_hsotg_gate(pdev, true);
- s3c_hsotg_otgreset(hsotg);
s3c_hsotg_corereset(hsotg);
s3c_hsotg_init(hsotg);
@@ -3412,7 +3337,6 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
return 0;
err_add_udc:
- s3c_hsotg_gate(pdev, false);
clk_disable(hsotg->clk);
clk_put(hsotg->clk);
@@ -3445,7 +3369,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
release_resource(hsotg->regs_res);
kfree(hsotg->regs_res);
- s3c_hsotg_gate(pdev, false);
clk_disable(hsotg->clk);
clk_put(hsotg->clk);
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
