This change gets the part number of the device when the driver is loaded and
stores it in the private portion of the port structure. This addition will
allow for part specific functionality to be added to the driver if needed.
Signed-off-by: Preston Fick <preston.fick@xxxxxxxxxx>
---
drivers/usb/serial/cp210x.c | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e67ccf3..b3646b8 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -154,6 +154,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
struct cp210x_port_private {
__u8 bInterfaceNumber;
+ __u8 bPartNumber;
};
static struct usb_driver cp210x_driver = {
@@ -187,6 +188,13 @@ static struct usb_serial_driver * const serial_drivers[] = {
&cp210x_device, NULL
};
+/* Part number definitions */
+#define CP2101_PARTNUM 0x01
+#define CP2102_PARTNUM 0x02
+#define CP2103_PARTNUM 0x03
+#define CP2104_PARTNUM 0x04
+#define CP2105_PARTNUM 0x05
+
/* Config request types */
#define REQTYPE_HOST_TO_INTERFACE 0x41
#define REQTYPE_INTERFACE_TO_HOST 0xc1
@@ -220,11 +228,15 @@ static struct usb_serial_driver * const serial_drivers[] = {
#define CP210X_SET_CHARS 0x19
#define CP210X_GET_BAUDRATE 0x1D
#define CP210X_SET_BAUDRATE 0x1E
+#define CP210X_VENDOR_SPECIFIC 0xFF
/* CP210X_IFC_ENABLE */
#define UART_ENABLE 0x0001
#define UART_DISABLE 0x0000
+/* CP210X_VENDOR_SPECIFIC */
+#define CP210X_GET_PARTNUM 0x370B
+
/* CP210X_(SET|GET)_BAUDDIV */
#define BAUD_RATE_GEN_FREQ 0x384000
@@ -862,6 +874,7 @@ static int cp210x_startup(struct usb_serial *serial)
{
struct cp210x_port_private *port_priv;
int i;
+ unsigned int partNum;
/* cp210x buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
@@ -876,6 +889,17 @@ static int cp210x_startup(struct usb_serial *serial)
serial->interface->cur_altsetting->desc.bInterfaceNumber;
usb_set_serial_port_data(serial->port[i], port_priv);
+
+ /* Get the 1-byte part number of the cp210x device */
+ usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ CP210X_VENDOR_SPECIFIC,
+ REQTYPE_DEVICE_TO_HOST,
+ CP210X_GET_PARTNUM,
+ port_priv->bInterfaceNumber,
+ &partNum, 1,
+ USB_CTRL_GET_TIMEOUT);
+ port_priv->bPartNumber = partNum & 0xFF;
}
return 0;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
