This patchset introduces the USB Host driver for i.MX28 CPU, utilising the generic USB PHY infrastructure. Also added is glue code for CI13xxx driver, to allow device mode. This patchset still does NOT support OTG mode, the device/host mode is selected via platform data. NOTE: This patchset is also available at: http://git.kernel.org/?p=linux/kernel/git/marex/linux-2.6.git;a=shortlog;h=refs/heads/mxs-usb V2: Introduce stub imx-usb driver that then registers the PHY and EHCI drivers. V3: Add the HCD on demand based on the PHY's state (only add HCD if it's host). Currently, only the HOST mode is supported. V4: * Introduce ci13xxx gadget glue * Reorder patches in a more sensible order * Introduce platform data, containing VBUS GPIO and port mode (device/gadget) * Rename imx-usb to imx-otg * Drop mx28evk usb host patch * Use more devm_ function * Rework the mxs-phy to register the same interrupt as ehci-mxs (and effectivelly kill bogus otg_set_vbus() call from ehci-mxs ; use standard ehci irq handling in ehci-mxs) V5: * Finally move OTG IRQ handling into imx-otg * Move imx_otg_set_{host,peripheral}() into imx-otg * Move imx_otg_work() into imx-otg driver (now it all makes sense, yay!) V6: Do PHY-specific job inside the PHY driver V7: * Pass only necessary data to the drivers registered by imx-otg (memory, irq, pointer to imx-otg device). This should fix issue pointed out by Lothar Wassmann. * Have single IRQ handler in imx-otg, which then calls host/gadget IRQ handlers only if they're registered via imx_otg_set_irq_handler() call, depending on the current state of the OTG. Marek Vasut (11): MXS: Make clk_disable return integer MXS: Add USB EHCI and USB PHY clock handling MXS: Fixup i.MX233 USB base address name MXS: Add data shared between imx-otg and EHCI driver MXS: Modify the ci13xxx_udc to avoid adding UDC MXS: Add small registration glue for ci13xxx_udc MXS: Add separate MXS EHCI HCD driver MXS: Add imx-otg driver MXS: Add USB PHY driver MXS: Add platform registration hooks for USB EHCI MXS: Enable USB on M28EVK arch/arm/mach-mxs/Kconfig | 2 + arch/arm/mach-mxs/clock-mx28.c | 28 +- arch/arm/mach-mxs/devices-mx28.h | 5 + arch/arm/mach-mxs/devices/Kconfig | 3 + arch/arm/mach-mxs/devices/Makefile | 1 + arch/arm/mach-mxs/devices/platform-usb.c | 89 +++++ arch/arm/mach-mxs/include/mach/clock.h | 2 +- arch/arm/mach-mxs/include/mach/devices-common.h | 13 + arch/arm/mach-mxs/include/mach/mx23.h | 8 +- arch/arm/mach-mxs/mach-m28evk.c | 21 + drivers/usb/gadget/Kconfig | 17 + drivers/usb/gadget/Makefile | 1 + drivers/usb/gadget/ci13xxx_mxs.c | 73 ++++ drivers/usb/gadget/ci13xxx_udc.c | 12 +- drivers/usb/gadget/ci13xxx_udc.h | 1 + drivers/usb/host/Kconfig | 7 + drivers/usb/host/ehci-hcd.c | 5 + drivers/usb/host/ehci-mxs.c | 187 +++++++++ drivers/usb/otg/Kconfig | 16 + drivers/usb/otg/Makefile | 2 + drivers/usb/otg/imx-otg.c | 480 +++++++++++++++++++++++ drivers/usb/otg/mxs-phy.c | 328 ++++++++++++++++ include/linux/usb/mxs-usb.h | 72 ++++ 23 files changed, 1360 insertions(+), 13 deletions(-) create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c create mode 100644 drivers/usb/gadget/ci13xxx_mxs.c create mode 100644 drivers/usb/host/ehci-mxs.c create mode 100644 drivers/usb/otg/imx-otg.c create mode 100644 drivers/usb/otg/mxs-phy.c create mode 100644 include/linux/usb/mxs-usb.h Cc: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx> Cc: Detlev Zundel <dzu@xxxxxxx> Cc: Fabio Estevam <festevam@xxxxxxxxx> Cc: Li Frank-B20596 <B20596@xxxxxxxxxxxxx> Cc: Linux USB <linux-usb@xxxxxxxxxxxxxxx> Cc: Liu JunJie-B08287 <B08287@xxxxxxxxxxxxx> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Cc: Shawn Guo <shawn.guo@xxxxxxxxxx> Cc: Shi Make-B15407 <B15407@xxxxxxxxxxxxx> Cc: Stefano Babic <sbabic@xxxxxxx> Cc: Subodh Nijsure <snijsure@xxxxxxxxxxxx> Cc: Wolfgang Denk <wd@xxxxxxx> -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
