> This patchset introduces the USB Host driver for i.MX28 CPU, utilising the > generic USB PHY infrastructure. Also added is glue code for CI13xxx driver, > to allow device mode. This patchset still does NOT support OTG mode, the > device/host mode is selected via platform data. I also pushed the patchset here: http://git.kernel.org/?p=linux/kernel/git/marex/linux-2.6.git;a=shortlog;h=refs/heads/mxs- usb > > V2: Introduce stub imx-usb driver that then registers the PHY and EHCI > drivers. V3: Add the HCD on demand based on the PHY's state (only add HCD > if it's host). Currently, only the HOST mode is supported. > V4: * Introduce ci13xxx gadget glue > * Reorder patches in a more sensible order > * Introduce platform data, containing VBUS GPIO and port mode > (device/gadget) * Rename imx-usb to imx-otg > * Drop mx28evk usb host patch > * Use more devm_ function > * Rework the mxs-phy to register the same interrupt as ehci-mxs (and > effectivelly kill bogus otg_set_vbus() call from ehci-mxs ; use > standard ehci irq handling in ehci-mxs) > V5: * Finally move OTG IRQ handling into imx-otg > * Move imx_otg_set_{host,peripheral}() into imx-otg > * Move imx_otg_work() into imx-otg driver (now it all makes sense, > yay!) V6: Do PHY-specific job inside the PHY driver > > Marek Vasut (11): > MXS: Make clk_disable return integer > MXS: Add USB EHCI and USB PHY clock handling > MXS: Fixup i.MX233 USB base address name > MXS: Add data shared between imx-otg and EHCI driver > MXS: Modify the ci13xxx_udc to avoid adding UDC > MXS: Add small registration glue for ci13xxx_udc > MXS: Add separate MXS EHCI HCD driver > MXS: Add imx-otg driver > MXS: Add USB PHY driver > MXS: Add platform registration hooks for USB EHCI > MXS: Enable USB on M28EVK > > arch/arm/mach-mxs/Kconfig | 2 + > arch/arm/mach-mxs/clock-mx28.c | 28 +- > arch/arm/mach-mxs/devices-mx28.h | 5 + > arch/arm/mach-mxs/devices/Kconfig | 3 + > arch/arm/mach-mxs/devices/Makefile | 1 + > arch/arm/mach-mxs/devices/platform-usb.c | 89 +++++ > arch/arm/mach-mxs/include/mach/clock.h | 2 +- > arch/arm/mach-mxs/include/mach/devices-common.h | 13 + > arch/arm/mach-mxs/include/mach/mx23.h | 8 +- > arch/arm/mach-mxs/mach-m28evk.c | 21 ++ > drivers/usb/gadget/Kconfig | 17 + > drivers/usb/gadget/Makefile | 1 + > drivers/usb/gadget/ci13xxx_mxs.c | 67 ++++ > drivers/usb/gadget/ci13xxx_udc.c | 12 +- > drivers/usb/gadget/ci13xxx_udc.h | 1 + > drivers/usb/host/Kconfig | 7 + > drivers/usb/host/ehci-hcd.c | 5 + > drivers/usb/host/ehci-mxs.c | 178 +++++++++ > drivers/usb/otg/Kconfig | 16 + > drivers/usb/otg/Makefile | 2 + > drivers/usb/otg/imx-otg.c | 437 > +++++++++++++++++++++++ drivers/usb/otg/mxs-phy.c | > 293 +++++++++++++++ include/linux/usb/mxs-usb.h | 94 > +++++ > 23 files changed, 1289 insertions(+), 13 deletions(-) > create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c > create mode 100644 drivers/usb/gadget/ci13xxx_mxs.c > create mode 100644 drivers/usb/host/ehci-mxs.c > create mode 100644 drivers/usb/otg/imx-otg.c > create mode 100644 drivers/usb/otg/mxs-phy.c > create mode 100644 include/linux/usb/mxs-usb.h > > Cc: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx> > Cc: Detlev Zundel <dzu@xxxxxxx> > Cc: Fabio Estevam <festevam@xxxxxxxxx> > Cc: Li Frank-B20596 <B20596@xxxxxxxxxxxxx> > Cc: Linux USB <linux-usb@xxxxxxxxxxxxxxx> > Cc: Liu JunJie-B08287 <B08287@xxxxxxxxxxxxx> > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > Cc: Shawn Guo <shawn.guo@xxxxxxxxxx> > Cc: Shi Make-B15407 <B15407@xxxxxxxxxxxxx> > Cc: Stefano Babic <sbabic@xxxxxxx> > Cc: Subodh Nijsure <snijsure@xxxxxxxxxxxx> > Cc: Wolfgang Denk <wd@xxxxxxx> Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
