Hi, Marek Vasut writes: > This driver handles claiming of clocks and memory areas. These are later > properly delegated to it's child devices, the USB Host (ehci-mxs) and > USB Gadget (ci13xxx-mxs). > > Signed-off-by: Marek Vasut <marex@xxxxxxx> > Cc: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx> > Cc: Detlev Zundel <dzu@xxxxxxx> > Cc: Fabio Estevam <festevam@xxxxxxxxx> > Cc: Li Frank-B20596 <B20596@xxxxxxxxxxxxx> > Cc: Lin Tony-B19295 <B19295@xxxxxxxxxxxxx> > Cc: Linux USB <linux-usb@xxxxxxxxxxxxxxx> > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > Cc: Shawn Guo <shawn.guo@xxxxxxxxxxxxx> > Cc: Shawn Guo <shawn.guo@xxxxxxxxxx> > Cc: Stefano Babic <sbabic@xxxxxxx> > Cc: Subodh Nijsure <snijsure@xxxxxxxxxxxx> > Cc: Tony Lin <tony.lin@xxxxxxxxxxxxx> > Cc: Wolfgang Denk <wd@xxxxxxx> > --- > drivers/usb/otg/Kconfig | 6 + > drivers/usb/otg/Makefile | 1 + > drivers/usb/otg/imx-otg.c | 473 +++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 480 insertions(+) > create mode 100644 drivers/usb/otg/imx-otg.c > > diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig > index 5c87db0..e7c6325 100644 > --- a/drivers/usb/otg/Kconfig > +++ b/drivers/usb/otg/Kconfig > @@ -116,6 +116,12 @@ config FSL_USB2_OTG > help > Enable this to support Freescale USB OTG transceiver. > > +config USB_IMX_COMPOSITE > + bool > + help > + Composite driver that handles clock and memory mapping for > + i.MX USB host and USB PHY. > + > config USB_MV_OTG > tristate "Marvell USB OTG support" > depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND > diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile > index 41aa509..7d2c631 100644 > --- a/drivers/usb/otg/Makefile > +++ b/drivers/usb/otg/Makefile > @@ -20,4 +20,5 @@ obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o > obj-$(CONFIG_AB8500_USB) += ab8500-usb.o > fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o > obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o > +obj-$(CONFIG_USB_IMX_COMPOSITE) += imx-otg.o > obj-$(CONFIG_USB_MV_OTG) += mv_otg.o > diff --git a/drivers/usb/otg/imx-otg.c b/drivers/usb/otg/imx-otg.c > new file mode 100644 > index 0000000..8440d909 > --- /dev/null > +++ b/drivers/usb/otg/imx-otg.c > @@ -0,0 +1,473 @@ > +/* > + * drivers/usb/otg/imx-otg.c > + * > + * Freescale i.MX USB composite driver. > + * > + * Copyright (C) 2012 Marek Vasut <marex@xxxxxxx> > + * on behalf of DENX Software Engineering GmbH > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + */ > + Why do you call this driver imx-otg when it is actually MXS specific? How would you call a corresponding driver for the remaining i.MX processors? Lothar Waßmann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info@xxxxxxxxxxxxxxxxxxx ___________________________________________________________ -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
