With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
---
drivers/usb/host/r8a66597-hcd.c | 12 ------------
drivers/usb/host/r8a66597.h | 5 -----
2 files changed, 0 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 2bf1320..60b8278 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -95,9 +95,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
int i = 0;
if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
clk_enable(r8a66597->clk);
-#endif
do {
r8a66597_write(r8a66597, SCKE, SYSCFG0);
tmp = r8a66597_read(r8a66597, SYSCFG0);
@@ -141,9 +139,7 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
udelay(1);
if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
clk_disable(r8a66597->clk);
-#endif
} else {
r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
@@ -2406,19 +2402,15 @@ static int __devexit r8a66597_remove(struct platform_device *pdev)
del_timer_sync(&r8a66597->rh_timer);
usb_remove_hcd(hcd);
iounmap(r8a66597->reg);
-#ifdef CONFIG_HAVE_CLK
if (r8a66597->pdata->on_chip)
clk_put(r8a66597->clk);
-#endif
usb_put_hcd(hcd);
return 0;
}
static int __devinit r8a66597_probe(struct platform_device *pdev)
{
-#ifdef CONFIG_HAVE_CLK
char clk_name[8];
-#endif
struct resource *res = NULL, *ires;
int irq = -1;
void __iomem *reg = NULL;
@@ -2482,7 +2474,6 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
if (r8a66597->pdata->on_chip) {
-#ifdef CONFIG_HAVE_CLK
snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
r8a66597->clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(r8a66597->clk)) {
@@ -2491,7 +2482,6 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
ret = PTR_ERR(r8a66597->clk);
goto clean_up2;
}
-#endif
r8a66597->max_root_hub = 1;
} else
r8a66597->max_root_hub = 2;
@@ -2531,11 +2521,9 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
return 0;
clean_up3:
-#ifdef CONFIG_HAVE_CLK
if (r8a66597->pdata->on_chip)
clk_put(r8a66597->clk);
clean_up2:
-#endif
usb_put_hcd(hcd);
clean_up:
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index f28782d..672cea3 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -26,10 +26,7 @@
#ifndef __R8A66597_H__
#define __R8A66597_H__
-#ifdef CONFIG_HAVE_CLK
#include <linux/clk.h>
-#endif
-
#include <linux/usb/r8a66597.h>
#define R8A66597_MAX_NUM_PIPE 10
@@ -113,9 +110,7 @@ struct r8a66597_root_hub {
struct r8a66597 {
spinlock_t lock;
void __iomem *reg;
-#ifdef CONFIG_HAVE_CLK
struct clk *clk;
-#endif
struct r8a66597_platdata *pdata;
struct r8a66597_device device0;
struct r8a66597_root_hub root_hub[R8A66597_MAX_ROOT_HUB];
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
