While testing unplugging an UVC HD webcam with usb-redirection (so through usbdevfs), my userspace usb-redir code was getting a value of -1 in iso_frame_desc[n].status, which according to Documentation/usb/error-codes.txt is not a valid value. The source of this -1 is the default case in xhci-ring.c:process_isoc_td() adding a kprintf there showed the value of trb_comp_code to be COMP_TX_ERR in this case, so this patch adds handling for that completion code to process_isoc_td(). This was observed and tested with the following xhci controller: 1033:0194 NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) Note: I also wonder if setting frame->status to -1 (-EPERM) is the best we can do, but since I cannot come up with anything better I've left that as is. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/usb/host/xhci-ring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6bd9d53..dbbf2cc 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1803,6 +1803,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, break; case COMP_DEV_ERR: case COMP_STALL: + case COMP_TX_ERR: frame->status = -EPROTO; skip_td = true; break; -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
