Dear Chen Peter-B29397, > > This patchset introduces the USB Host driver for i.MX28 CPU, utilising > > the > > generic USB PHY infrastructure. Also added is glue code for CI13xxx > > driver, to > > allow device mode. This patchset still does NOT support OTG mode, the > > device/host mode is selected via platform data. > > Does the udc work at this patchset? If it is, you have enabled OTG port > and not host 1 port, correct? Wait for V5. Gadget mode should work, V5 should have some further rebase issues fixed. > > > V2: Introduce stub imx-usb driver that then registers the PHY and EHCI > > drivers. > > V3: Add the HCD on demand based on the PHY's state (only add HCD if it's > > host). > > > > Currently, only the HOST mode is supported. > > > > V4: * Introduce ci13xxx gadget glue > > > > * Reorder patches in a more sensible order > > * Introduce platform data, containing VBUS GPIO and port mode > > > > (device/gadget) > > > > * Rename imx-usb to imx-otg > > * Drop mx28evk usb host patch > > * Use more devm_ function > > * Rework the mxs-phy to register the same interrupt as ehci-mxs (and > > > > effectivelly kill bogus otg_set_vbus() call from ehci-mxs ; use > > > > standard > > > > ehci irq handling in ehci-mxs) > > > > Marek Vasut (11): > > MXS: Make clk_disable return integer > > MXS: Add USB EHCI and USB PHY clock handling > > MXS: Fixup i.MX233 USB base address name > > MXS: Add data shared between imx-otg and EHCI driver > > MXS: Modify the ci13xxx_udc to avoid adding UDC > > MXS: Add small registration glue for ci13xxx_udc > > MXS: Add separate MXS EHCI HCD driver > > MXS: Add imx-otg driver > > MXS: Add USB PHY driver > > MXS: Add platform registration hooks for USB EHCI > > MXS: Enable USB on M28EVK > > > > arch/arm/mach-mxs/Kconfig | 2 + > > arch/arm/mach-mxs/clock-mx28.c | 28 +- > > arch/arm/mach-mxs/devices-mx28.h | 5 + > > arch/arm/mach-mxs/devices/Kconfig | 3 + > > arch/arm/mach-mxs/devices/Makefile | 1 + > > arch/arm/mach-mxs/devices/platform-usb.c | 84 +++++ > > arch/arm/mach-mxs/include/mach/clock.h | 2 +- > > arch/arm/mach-mxs/include/mach/devices-common.h | 12 + > > arch/arm/mach-mxs/include/mach/mx23.h | 8 +- > > arch/arm/mach-mxs/mach-m28evk.c | 20 ++ > > drivers/usb/gadget/Kconfig | 17 + > > drivers/usb/gadget/Makefile | 1 + > > drivers/usb/gadget/ci13xxx_mxs.c | 67 ++++ > > drivers/usb/gadget/ci13xxx_udc.c | 12 +- > > drivers/usb/gadget/ci13xxx_udc.h | 1 + > > drivers/usb/host/Kconfig | 7 + > > drivers/usb/host/ehci-hcd.c | 5 + > > drivers/usb/host/ehci-mxs.c | 197 ++++++++++ > > drivers/usb/otg/Kconfig | 16 + > > drivers/usb/otg/Makefile | 2 + > > drivers/usb/otg/imx-otg.c | 282 +++++++++++++++ > > drivers/usb/otg/mxs-phy.c | 438 > > > > +++++++++++++++++++++++ > > > > include/linux/fsl/mxs-usb.h | 46 +++ > > 23 files changed, 1243 insertions(+), 13 deletions(-) > > create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c > > create mode 100644 drivers/usb/gadget/ci13xxx_mxs.c > > create mode 100644 drivers/usb/host/ehci-mxs.c > > create mode 100644 drivers/usb/otg/imx-otg.c > > create mode 100644 drivers/usb/otg/mxs-phy.c > > create mode 100644 include/linux/fsl/mxs-usb.h > > > > Cc: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx> > > Cc: Detlev Zundel <dzu@xxxxxxx> > > Cc: Fabio Estevam <festevam@xxxxxxxxx> > > Cc: Li Frank-B20596 <B20596@xxxxxxxxxxxxx> > > Cc: Lin Tony-B19295 <B19295@xxxxxxxxxxxxx> > > Cc: Linux USB <linux-usb@xxxxxxxxxxxxxxx> > > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > > Cc: Shawn Guo <shawn.guo@xxxxxxxxxxxxx> > > Cc: Shawn Guo <shawn.guo@xxxxxxxxxx> > > Cc: Stefano Babic <sbabic@xxxxxxx> > > Cc: Subodh Nijsure <snijsure@xxxxxxxxxxxx> > > Cc: Tony Lin <tony.lin@xxxxxxxxxxxxx> > > Cc: Wolfgang Denk <wd@xxxxxxx> > > > > NOTE: Adding this ci13xxx-mxs driver was really helpful, it helped me to > > realise > > > > how this whole monster should look like in the end. Now the mxs-phy > > > > is > > > > also much more prepared for the OTG operation. > > > > -- > > 1.7.9.5 Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
