ping Alan, Felipe, Can this go into 3.5? The dependency patch has already reached Samuel's tree, what would be the best way to apply this one? Should I ask Samuel to apply this one also (after having your acks) via his tree, to reduce possible merge failures/conflicts? On 03/27/12 16:08, Igor Grinberg wrote: > When PHY reset pin is connected to a GPIO on external GPIO chip > (e.g. I2C), we should not call the gpio_set_value() function, but > gpio_set_value_cansleep(). > > Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> > --- > This patch depends on the patch from Keshava [1]: > ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue > > [1] http://www.spinics.net/lists/linux-omap/msg66774.html > > drivers/usb/host/ehci-omap.c | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c > index 5c78f9e..26e9241 100644 > --- a/drivers/usb/host/ehci-omap.c > +++ b/drivers/usb/host/ehci-omap.c > @@ -258,10 +258,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) > udelay(10); > > if (gpio_is_valid(pdata->reset_gpio_port[0])) > - gpio_set_value(pdata->reset_gpio_port[0], 1); > + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1); > > if (gpio_is_valid(pdata->reset_gpio_port[1])) > - gpio_set_value(pdata->reset_gpio_port[1], 1); > + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); > } > > return 0; -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
