> > > > - Now, the PHY and OTG is separated, it is better to put PHY driver to > > drivers/usb/phy/ > > There is no drivers/usb/phy ... > You can discuss with Felipe Balbi <balbi@xxxxxx>, if it is ok to create it to put PHY driver. > > > > - mx23, mx28, mx6q uses the same PHY (FSL PHY), it is better to use the > phy > > driver name as imx-phy.c. > > Why? mxs == mx23,28,6q and mxc == the rest ... seems to me to be pretty > well > rooted terminology already. mx23, 28, 6q uses Freescale itself PHY. mxc uses chipidea PHY. Originally, I thought it should use IP vendor's name. After thinking it more, it is ok use mxs for mx23,28,6q's PHY. > > > > > > Marek Vasut (10): > > > MXS: Make clk_disable return integer > > > MXS: Add USB EHCI and USB PHY clock handling > > > MXS: Fixup i.MX233 USB base address name > > > MXS: Add data shared between imx-usb, PHY and EHCI driver > > > MXS: Add platform registration hooks for USB EHCI > > > MXS: Add composite imx-usb driver > > > MXS: Add USB PHY driver > > > MXS: Add separate MXS EHCI HCD driver > > > MXS: Enable USB on M28EVK > > > MXS: Enable USB on MX28EVK > > > > > > arch/arm/mach-mxs/Kconfig | 4 + > > > arch/arm/mach-mxs/clock-mx28.c | 28 ++- > > > arch/arm/mach-mxs/devices-mx28.h | 4 + > > > arch/arm/mach-mxs/devices/Kconfig | 3 + > > > arch/arm/mach-mxs/devices/Makefile | 1 + > > > arch/arm/mach-mxs/devices/platform-usb.c | 67 +++++ > > > arch/arm/mach-mxs/include/mach/clock.h | 2 +- > > > arch/arm/mach-mxs/include/mach/devices-common.h | 9 + > > > arch/arm/mach-mxs/include/mach/mx23.h | 8 +- > > > arch/arm/mach-mxs/mach-m28evk.c | 9 + > > > arch/arm/mach-mxs/mach-mx28evk.c | 10 + > > > drivers/usb/host/Kconfig | 7 + > > > drivers/usb/host/ehci-hcd.c | 5 + > > > drivers/usb/host/ehci-mxs.c | 254 > > > > > > +++++++++++++++++++ > > > > > > drivers/usb/otg/Kconfig | 16 ++ > > > drivers/usb/otg/Makefile | 2 + > > > drivers/usb/otg/imx-usb.c | 303 > > > > > > +++++++++++++++++++++++ > > > > > > drivers/usb/otg/mxs-phy.c | 201 > +++++++++++++++ > > > include/linux/fsl_devices.h | 15 ++ > > > 19 files changed, 939 insertions(+), 9 deletions(-) > > > create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c > > > create mode 100644 drivers/usb/host/ehci-mxs.c > > > create mode 100644 drivers/usb/otg/imx-usb.c > > > create mode 100644 drivers/usb/otg/mxs-phy.c > > > > > > Cc: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx> > > > Cc: Detlev Zundel <dzu@xxxxxxx> > > > Cc: Fabio Estevam <festevam@xxxxxxxxx> > > > Cc: Li Frank-B20596 <B20596@xxxxxxxxxxxxx> > > > Cc: Lin Tony-B19295 <B19295@xxxxxxxxxxxxx> > > > Cc: Linux USB <linux-usb@xxxxxxxxxxxxxxx> > > > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > > > Cc: Shawn Guo <shawn.guo@xxxxxxxxxxxxx> > > > Cc: Shawn Guo <shawn.guo@xxxxxxxxxx> > > > Cc: Stefano Babic <sbabic@xxxxxxx> > > > Cc: Subodh Nijsure <snijsure@xxxxxxxxxxxx> > > > Cc: Tony Lin <tony.lin@xxxxxxxxxxxxx> > > > Cc: Wolfgang Denk <wd@xxxxxxx> > > > -- > > > 1.7.9.5 > > Best regards, > Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
