From: Stephen Warren <swarren@xxxxxxxxxx> In the ClearPortFeature/USB_PORT_FEAT_ENABLE case, ehci_hub_control() would read from status_reg, clear PORT_PE, and write the result back to status_reg. This would clear any bits in PORT_RWC_BITS that were set in the registers. Fix this by masking these bits off before the write. Since this masking is common across all ClearPortFeature cases, move it into a single early location to avoid duplicating it. Remove the same bugfix from ehci-tegra.c's tegra_ehci_hub_control(), now that this case is correctly handled by the core. Signed-off-by: Stephen Warren <swarren@xxxxxxxxxx> --- drivers/usb/host/ehci-hub.c | 17 +++++++---------- drivers/usb/host/ehci-tegra.c | 13 +------------ 2 files changed, 8 insertions(+), 22 deletions(-) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 38fe076..3ff35b9 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -699,6 +699,7 @@ static int ehci_hub_control ( goto error; wIndex--; temp = ehci_readl(ehci, status_reg); + temp &= ~PORT_RWC_BITS; /* * Even if OWNER is set, so the port is owned by the @@ -712,8 +713,7 @@ static int ehci_hub_control ( ehci_writel(ehci, temp & ~PORT_PE, status_reg); break; case USB_PORT_FEAT_C_ENABLE: - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC, - status_reg); + ehci_writel(ehci, temp | PORT_PEC, status_reg); break; case USB_PORT_FEAT_SUSPEND: if (temp & PORT_RESET) @@ -742,7 +742,7 @@ static int ehci_hub_control ( spin_lock_irqsave(&ehci->lock, flags); } /* resume signaling for 20 msec */ - temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); + temp &= ~PORT_WAKE_BITS; ehci_writel(ehci, temp | PORT_RESUME, status_reg); ehci->reset_done[wIndex] = jiffies + msecs_to_jiffies(20); @@ -752,9 +752,8 @@ static int ehci_hub_control ( break; case USB_PORT_FEAT_POWER: if (HCS_PPC (ehci->hcs_params)) - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); + ehci_writel(ehci, temp & ~PORT_POWER, + status_reg); break; case USB_PORT_FEAT_C_CONNECTION: if (ehci->has_lpm) { @@ -762,12 +761,10 @@ static int ehci_hub_control ( temp &= ~PORT_LPM; temp &= ~PORT_DEV_ADDR; } - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC, - status_reg); + ehci_writel(ehci, temp | PORT_CSC, status_reg); break; case USB_PORT_FEAT_C_OVER_CURRENT: - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC, - status_reg); + ehci_writel(ehci, temp | PORT_OCC, status_reg); break; case USB_PORT_FEAT_C_RESET: /* GetPortStatus clears reset */ diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 10bb3ea..0300137 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -148,18 +148,7 @@ static int tegra_ehci_hub_control( spin_lock_irqsave(&ehci->lock, flags); - /* - * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits - * that are write on clear, by writing back the register read value, so - * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits - */ - if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) { - temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS; - ehci_writel(ehci, temp & ~PORT_PE, status_reg); - goto done; - } - - else if (typeReq == GetPortStatus) { + if (typeReq == GetPortStatus) { temp = ehci_readl(ehci, status_reg); if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { /* Resume completed, re-enable disconnect detection */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html