Re: [PATCH] EHCI: maintain the ehci->command value properly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 17 Apr 2012, Greg KH wrote:

> On Tue, Apr 17, 2012 at 03:25:14PM -0400, Alan Stern wrote:
> > The ehci-hcd driver is a little haphazard about keeping track of the
> > state of the USBCMD register.  The ehci->command field is supposed to
> > hold the register's value (apart from a few special bits) at all
> > times, but it isn't maintained properly.
> > 
> > This patch (as1543) cleans up the situation.  It keeps ehci->command
> > up-to-date, and uses that value rather than reading the register from
> > the hardware whenever possible.
> > 
> > Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> 
> Is this for 3.4 or 3.5?

3.5.  In general if I don't say specifically that a patch should be 
applied to the current -rc or to -stable then you can assume it's meant 
for -next.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux