Dear Sergei Shtylyov, > Hello. > > On 18-04-2012 6:07, Marek Vasut wrote: > > Enable the second USB port on M28EVK board. > > > > Signed-off-by: Marek Vasut<marex@xxxxxxx> > > Cc: Chen Peter-B29397<B29397@xxxxxxxxxxxxx> > > Cc: Detlev Zundel<dzu@xxxxxxx> > > Cc: Fabio Estevam<festevam@xxxxxxxxx> > > Cc: Li Frank-B20596<B20596@xxxxxxxxxxxxx> > > Cc: Lin Tony-B19295<B19295@xxxxxxxxxxxxx> > > Cc: Linux USB<linux-usb@xxxxxxxxxxxxxxx> > > Cc: Sascha Hauer<s.hauer@xxxxxxxxxxxxxx> > > Cc: Shawn Guo<shawn.guo@xxxxxxxxxxxxx> > > Cc: Shawn Guo<shawn.guo@xxxxxxxxxx> > > Cc: Stefano Babic<sbabic@xxxxxxx> > > Cc: Subodh Nijsure<snijsure@xxxxxxxxxxxx> > > Cc: Tony Lin<tony.lin@xxxxxxxxxxxxx> > > Cc: Wolfgang Denk<wd@xxxxxxx> > > --- > > > > arch/arm/mach-mxs/Kconfig | 2 ++ > > arch/arm/mach-mxs/mach-m28evk.c | 9 +++++++++ > > 2 files changed, 11 insertions(+) > > > > diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig > > index 9dbf29f..5b5566c 100644 > > --- a/arch/arm/mach-mxs/Kconfig > > +++ b/arch/arm/mach-mxs/Kconfig > > [...] > > > @@ -377,6 +382,10 @@ static void __init m28evk_init(void) > > > > mx28_add_ts(&touch_pdata); > > > > mx28_add_gpmi_nand(&m28evk_gpmi_nand_data); > > > > + > > + gpio_request_one(MXS_GPIO_NR(3, 13), GPIOF_OUT_INIT_LOW, "USB Power"); > > Still can fail, and you don't handle it (unlike the next patch). Hey, it was 4am in the morning when I was submitting this stuff, pardon my mistake ;-) Will be fixed in the new revision, thanks! > > WBR, Sergei Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
