On Mon, Apr 16, 2012 at 10:16 PM, Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> wrote: > Hi Keshava, > > On Wed, Apr 11, 2012 at 05:15:03PM +0530, Munegowda, Keshava wrote: >> On Tue, Mar 27, 2012 at 8:40 PM, Igor Grinberg <grinberg@xxxxxxxxxxxxxx> wrote: >> > On 03/19/12 08:42, Keshava Munegowda wrote: >> >> From: Keshava Munegowda <Keshava_mgowda@xxxxxx> >> >> >> >> It is observed that the echi ports of 3430 sdp board >> >> are not working due to the random timing of programming >> >> the associated GPIOs of the ULPI PHYs of the EHCI for reset. >> >> If the PHYs are reset at during usbhs core driver, host ports will >> >> not work because EHCI driver is loaded after the resetting PHYs. >> >> The PHYs should be in reset state while initializing the EHCI >> >> controller. >> >> The code which does the GPIO pins associated with the PHYs >> >> are programmed to reset is moved from the USB host core driver >> >> to EHCI driver. >> >> >> >> Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx> >> >> Reviewed-by: Partha Basak <parthab@xxxxxxxxxxxx> >> > >> > Both EHCI ports worked on cm-t3730 previously and >> > no regression is seen with this patch. >> > >> > Tested-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> >> > >> > -- >> > Regards, >> > Igor. >> >> Hi sameo >> Since I am not seeing this patch in linux-next labled 3.4.rc2 >> on 10th april 2012; >> please let me know your plan to queue this patch for the main line. > I applied this one to my for-linus branch, thanks. > > Cheers, > Samuel. > > -- > Intel Open Source Technology Centre > http://oss.intel.com/ Thank a lot Samuel regards keshava -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
