From: Kishon Vijay Abraham I <kishon@xxxxxx>
During modprobe of gadget driver, pullup is called after
udc_start. In order to make the exit path symmetric when
removing a gadget driver, call pullup before ->udc_stop.
This is needed to avoid issues with PM where udc_stop
disables the module completely (put IP in reset state,
cut functional and interface clocks, and so on), which
prevents us from accessing the IP's address space,
thus creating the possibility of an abort exception
when we try to access IP's address space after clocks
are off.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Partha Basak <p-basak2@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/gadget/udc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index c261887..2fa9865 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -264,8 +264,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
if (udc_is_newstyle(udc)) {
udc->driver->disconnect(udc->gadget);
udc->driver->unbind(udc->gadget);
- usb_gadget_udc_stop(udc->gadget, udc->driver);
usb_gadget_disconnect(udc->gadget);
+ usb_gadget_udc_stop(udc->gadget, udc->driver);
} else {
usb_gadget_stop(udc->gadget, udc->driver);
}
--
1.7.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
