[PATCH v3 03/13] usb:hsotg:samsung: Use of regulator_bulk_* functions for USB regulators

[Lukasz Majewski <l.majewski@xxxxxxxxxxx>]

This commit adds support for supply voltage management for s3c-hsotg IP
block. For that purpose a convenient regulator_bulk_* functions have been
used.

Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
 drivers/usb/gadget/s3c-hsotg.c |   41 ++++++++++++++++++++++++++++++++++++++-
 1 files changed, 39 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 8aeb5d0..10cc3f4 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -41,6 +42,11 @@
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))
 
+static const char * const s3c_hsotg_supply_names[] = {
+	"vusb_d",		/* digital USB supply, 1.2V */
+	"vusb_a",		/* analog USB supply, 1.1V */
+};
+
 /* EP0_MPS_LIMIT
  *
  * Unfortunately there seems to be a limit of the amount of data that can
@@ -135,6 +141,7 @@ struct s3c_hsotg_ep {
  * @regs: The memory area mapped for accessing registers.
  * @regs_res: The resource that was allocated when claiming register space.
  * @irq: The IRQ number we are using
+ * @supplies: Definition of USB power supplies
  * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
  * @debug_root: root directrory for debugfs.
  * @debug_file: main status file for debugfs.
@@ -155,6 +162,8 @@ struct s3c_hsotg {
 	int			irq;
 	struct clk		*clk;
 
+	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
+
 	unsigned int		dedicated_fifos:1;
 
 	struct dentry		*debug_root;
@@ -3259,6 +3268,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	struct resource *res;
 	int epnum;
 	int ret;
+	int i;
 
 	plat = pdev->dev.platform_data;
 	if (!plat) {
@@ -3357,6 +3367,26 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 
 	s3c_hsotg_phy_enable(hsotg);
 
+	/* regulators */
+
+	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
+		hsotg->supplies[i].supply = s3c_hsotg_supply_names[i];
+
+	ret = regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies),
+				 hsotg->supplies);
+	if (ret) {
+		dev_err(dev, "failed to request supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+
+	if (ret) {
+		dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
 	s3c_hsotg_corereset(hsotg);
 	s3c_hsotg_init(hsotg);
 
@@ -3366,7 +3396,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 
 	ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
 	if (ret)
-		goto err_add_udc;
+		goto err_supplies;
 
 	s3c_hsotg_create_debug(hsotg);
 
@@ -3375,9 +3405,12 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	our_hsotg = hsotg;
 	return 0;
 
-err_add_udc:
+err_supplies:
 	s3c_hsotg_phy_disable(hsotg);
 
+	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+
 	clk_disable(hsotg->clk);
 	clk_put(hsotg->clk);
 
@@ -3412,6 +3445,10 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 
 	s3c_hsotg_phy_disable(hsotg);
 
+
+	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+
 	clk_disable(hsotg->clk);
 	clk_put(hsotg->clk);
 
-- 
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html